Grab A Gear Into Spring & Save Up To 20% | Shop Now
Grab A Gear Into Spring & Save Up To 20% | Shop Now
Fairly easy to install. Great quality. Brought down the running temp on my 98 XJ by 20 degrees.
Excellent product and excellent service from 4WP as always!
Works as it should. Cool down is faster then stock pump. I added a high flow thermostat as well. Probably do a new alu. Radiator soon.
I installed this in my ‘97 ZJ 40. I’ve noticed a significant difference in the cooling with my temps staying more consistent. The build quality was exceptional compared to OEM and the parts store brands.
Q: Hi, I have a1956 Ford Fairlane 292 C.I. engine proffessionaly rebuilt with a new 4 Core Radiator. My car will run warm to hot in parades or hot days in the city. I am thinking of purchasing a 1635 FlowKooler water pump. I live near Ottawa in Ontario Canada, do you ship to Canada and how long would it take to get here. Answer this question
A: Hello We have the store in Burlington ON that could ship to you. Their number is 905-634-0001 Thanks
Answered by Rody on 07/12/2015
Q: will this work on my 95 jeep wrangler yj 4.0 engine Answer this question
A: Hello I checked in the Jeep / Chrysler part catalog and this pump will fit the 2.5 and 4.0 through 1995. Thanks
Answered by Rody on 05/28/2015
Q: Can you use it over 3000 rpm? It said 0-3000 rpm so is it going to blow up or cause to much pressure? Answer this question
A: Hello It says corrects the problem on poor water flow between 0-3000 rpm's. It works just as well at 6,000 rpm's as it does at 1,500 rpm's Thanks
Answered by Rody on 04/04/2015
Q: I have an 82 scrambler with v-belts and I am running AC. Is there a FlowKooler part for this application? Answer this question
A: Hello This is the correct pump with the V-Belt and works with A/C. They are correcting the website. Thanks
Answered by Rody on 01/24/2015
Q: Is this product in stock in Canada? Flow Kooler 1747. If not in stock in Canada, how long for delivery to Victoria, BC? Thank for you response to this request. Pat Victoria,BC Answer this question
A: Hello Pat We have it in stock here is the states. It looks like it would take 10 to 14 days to reach you in BC.
Answered by Rody on 12/07/2014
FlowKooler produces high flow water pumps in Paso Robles, California. The manufacturer's water pump impellers are more highly pressurized than stock Jeep water pumps. In addition, they move more cubic feet of water per minute than does the stock Jeep water pump. With this higher flow capacity and higher pressure, FlowKooler products prevent engine overheating. Pushing coolant through the block faster condenses the number of milliseconds it takes for the coolant to cycle from the engine to the radiator. The more coolant that gets pushed through per second, the larger the number of kelvins that can get transferred to the coolant and the result is better water pump impellers for jeepers. Shop FlowKooler Now