Fabtech's Performance Twin Tube Struts were designed to work precisely in conjunction with their suspension systems to provide superior performance and ride control. The high velocity 9-stage valving and closed cell foam insert provide excellent dampening capabilities and reduce shock fade at high speeds
The Strut fasterner size is smaller 5/16 thread verses 3/8 and the shank is smaller, as well as the rubber busings, while it dose install the bushing will wear much faster than the factory size, I replace old FAB tech that were of the larger size, they claim it will not be an issue, however Ithink it will.
By Bill from Fort Worth Texas
Strut kit. Hmmm?
To remove the adjustable sleeve from the old one was very difficult. I cleaned it up the best I could and lubed the strut and the old sleeve had a hard time going back on also. I ended up repainting the strut. The bad part about the whole thing it was not specific on what the (kit) included. Only the snap ring. I wanted for snap.
Good day! I have 2003 Tundra with Fabtech FTS2400K, and i need to replace my front shocks (leaking). Will these shocks fit my Fabtech kit?
George from Miami, Florida on
No, this strut will not fit your vehicle application. We do offer the Bilstein 5100 Series Ride Height Adjustable Shock Absorber Part Number: BIL24-188265 that will fit your vehicle. Thank you.
from Miami, Florida on
I have a 99 toyota tacoma with a 6 inch fabtech lift. I need new front shocks. Are these the right ones?
aaron from kona, hi on
Yes, the Fabtech Strut Kit FABFTS2300S will fit your vehicle application. Thank you.
from kona, hi on
I have a 1999 Toyota Tacoma 4x4 2.7L with 6" Fabtech left. Will this strut replace the ones that I have now using the springs that are on my ole ones?
Paco from Robeline, La. on
Yes you will be able to use your original coil on this new strut.
Fabtech Performance produces quality lifted suspension systems, leveling kits and shock absorbers. The company is headquarted in Chino, California. The five-acre Fabtech campus houses the product development team and the hi-tech, state-of-the-art manufacturing facility. The company manufacturers accessories for GMC, Chevrolet, Dodge, Ram, Hummer, Jeep, Nissan and Toyota off-road vehicles as well as for UTVs. Select FabTech suspension systems are FMVSS 126-certified and come with a 60,000 mile or five year Powertrain Warranty. The reason Fabtech can afford to give such a generous warranty is that they rigorously test their products on the vehicles of real customers. They install the suspension systems on the trucks, Jeeps and SUVs of random customers for free. The customers drive the vehicles like they normally would. And Fabtech regularly checks the customer's vehicle to moniter how the suspension components are performing and enduring. It is this real world testing that gives Fabtech products the quality edge. Shop Fabtech Now