Fabtech Spindles

A: FTS21059 is a retro fit box that updates our 6” & 8” Chevy HD kits. This is NOT a stand alone part that gives you lift.

A: No they do not.

A: This spindle is only for 2500 models.

A: This is a pair.

A: This is just a standard product image, that is why we say Note: product may differ from image shown. As long as you have a 4WD model and the fitment matches, you will be fine.

A: These are only sold as a pair.

A: Hello AustinBrodoze, No, this will only fit a 2WD vehicle. Thank you.

A: Hello Joey, This package will not fit your vehicle application. The correct part number for your vehicle is FABK2164M. Thank you for the question.

A: Thanks for the inquiry CHRIS, the Fabtech 3.5 Inch Lift Spindle part # FABFTS97159-7 is incorrect, this manufacturer only offers a 6 inch lift for a 4x4.

A: Thanks for the inquiry kirby, the Fabtech 3.5 Inch Lift Spindle FABFTS97159-7 these increase the track width about .5 inch per side.

A: Frank, This spindle does not require you to flip the ball joint, it will require you to remove the steering stop on the lower control arm. Hope this helps thanks for the question.

A: Hello Vinnie, You will need a 3.50" to 4.50" wheel backspace.

A: Hello You didn't say what type of truck you are working on. There might be longer coils or coils spacers. Since they make the front they would have a rear option also. Thanks

A: Hello Olive, you would need to run a larger coil spring or a small spacer if the back is still sitting lower. Thank you for your question.

A: These only fit a 2wd F150. Fabtech only makes a full 6" lift kit for your expedition.

A: Hello Speed, Thank you for asking. The Fabtech 4 Inch Lift Spindle are for 2wd models.

A: Hello doc, the Fabtech spindles can not be combined with the Cst kit. You will need to use their knuckles. Thank you for your question.

A: Hello X, Thank you for asking. You would be better off getting the whole kit. http://jo.my/c2hdhw

A: Hello Farin, the Fabtech 4 Inch Lift Spindle part# FABFTS1588-7 is sold in a pair. Thank you for your inquiry.

A: Hello ? and thank you for your question! Fabtech 3 Inch Lift Spindle will clear a 33" size tire.

A: Hello brooks from hammond, la and thank you for the inquiry on the Fabtech 3 Inch Lift Spindles.This part will fit 1995.5 to 2004 Toyota Tacoma 5 Lug vehicles Here is a link to the FABTECH lift kit that will fit your vehicle if you have a 2 wheel drive: http://jo.my/l2bxpg.qrcode

A: Hello JR, Thank you for asking. The Fabtech 3 Inch Lift Spindle will give your vehicle a wider stance in the front.

A: Hello JR, Thank you for asking. The Fabtech 3 Inch Lift Spindle will give your vehicle a wider stance in the front.

A: Hello Slate, the Fabtech 6 Inch Lift Spindle part# FABFTS4130-7 comes in a pair. Thank you for your question.

A: Hello John, Thank you for asking. The Fabtech 4 Inch Lift Spindles will raise a stock 92-99 Chevy 1500 2WD 4 inches. In order to have the rear end match the front end, you will need to put a 2-4 inch rear block kit.

A: Hello Manny, Fabtech 3.5 Inch Lift Spindle would lift your 2003 F150 3.5" taller from stock height.

A: Hi Diony The Fabtech 3 Inch Lift Spindle, fabfts4130-7, I would recommend you purchase these to make sure you have enough clearance for the 33x12.50/15 tires. Thanks BJ

A: Hello Gdamico. The Fabtech 3" lift spindle kit is sold as a pair of spindles only. We would suggest purchasing new shocks while you are making the change to your ride, but it is not required to change your stock shocks. The spindle has no affect on the length of the shock in comparison to stock height.

A: Hello Lukenel, Thank you for the question. No, this will not fit your vehicle application. Lift spindles are designed for 2WD vehicles only.

A: Hello mini taco, Thank you for the question. The issue is the wheel backspace. This absolutely requires a 3.75" backspace wheels or your will have alignment issues.

A: Hello Tim, Thank you for the question. Yes, this will fit.

A: Wheelie- Thanks for the question. As of the moment Fab tech has no plans that we know of for a spindle lift that will fit your 2012 GMC 4x4

A: Michael- Thanks for the question. The Fabtech 3.5 Inch Lift Spindle will only fit the heritage body style.

A: Hello GaMedic10573, Thank you for the question. This part fits your vehicle: 2001 CHEVROLET SILVERADO 1500 NONE V8 - 5.3 Liter - GAS

A: Joe- Thank you for your question. Wayne will be calling you shortly to help you find the right kit for your needs.

A: Emory- Thank you for your question. The Fabtech 3.5 Inch Lift Spindle is for the front only. I would recommend no larger than 33" tires or you will experience rubbing at full lock and full stuff. Note that you will rub on 33" tires in the rear at stock height especially if you still have the factory air ride system.

A: Big E Thank you for your question. The 33" by 10.5 is the largest recommended tire size for your 97 expedition. You can mount 35's but you will have some rubbing at full lock and full stuff.

A: Hello Cheeseburger, Thank you for the question. No springs are needed with a spindle lift. It's all designed into the spindle.

A: Hello Sal, Thank you for the question. The Fabtech 3 Inch Lift Spindle FABFTS4130-7 will only fit the 5 lug vehicles.

A: Hi Tyler Yes these spindles are sold as a pair Thank You