Utilizing the factory link arm mounts Fabtech offers a 5 inch Short Arm system that features heavy wall 5/16 inch thick links with rotational urethane ends for unrestricted movement. These heavy duty links feature adjustable ends to dial in caster and pinion angles. System includes front upper and lower links while the rear receives lower links only. Lift is accomplished with replacement coil springs that have a slightly higher spring rate over factory while retaining flexibility for offroad use. The front Trac Bar is relocated keeping the arc of travel uniform to the drag link angle with included dropped pitman arm. The relationship of the Trac Bar and drag link is critical in providing bump steer free driving. The rear Trac Bar is also relocated keeping the axle located under the vehicle for proper front and rear axle tracking. Fabtech offers heavy duty replacement driveshafts to be used with this system for maximum driveline reliability. Extended length bump stop brackets, sway bar links and brake line brackets finish off this excellent performing system.
Will this work on a 2012 Jeep Wrangler sport. And with this i need new drive shafts, tires, wheels, and a speedometer calibrator. Would i need anything else to finish this lift or is the kit complete
the king from on
You are correct. Installation on your vehicle will require new driveshafts, wheels, tires and programmer. I also suggest upgrading to an adjustable front track bar, front sway bar disconnects and extended stainless steel brake lines. We do offer the Rubicon Express 4.5 Inch Super-Flex Short Arm Lift Kit with Mono Tube Shocks Part Number: R/ERE7124M that includes eveything this kit has with my additional suggested upgrades. I hope that helps answer your questions. Thank you.
I have a 2012 Chevy Silverado 1500. The vehicle is a Z71 4X4. Will this product work with my vehicle?
ko from on
The FABFTS21088 is just for the 2 Wheel Drive GM Trucks. It is a spindle lift and will
not work with your 4 Wheel Drive. You would need a Pro Comp 6 inch lift part number
EXPK1144BP or Rancho 4 inch lift part number RANRS6583B with 2 each RANRS7297 rear shocks. Another very inexpensive option would be to go with a
EXP63235 strut spacer lift. I hope this is helpful.
I have a 2013 4x4 Silverado with a 2.5 inch leveling kit. Rear is stock. Will this work with the leveling kit and can I use my factory Z71 wheels with 33" 's?
BigBadChad from Athens, GA on
The Fabtech 3.5 Inch Lift Kit w/Performance Shocks will work with a leveling kit but your will need to upgrade wheels. The factory wheels do not have the correct backspace to run a 325/50R20. Thank you.
Fabtech Performance produces quality lifted suspension systems, leveling kits and shock absorbers. The company is headquarted in Chino, California. The five-acre Fabtech campus houses the product development team and the hi-tech, state-of-the-art manufacturing facility. The company manufacturers accessories for GMC, Chevrolet, Dodge, Ram, Hummer, Jeep, Nissan and Toyota off-road vehicles as well as for UTVs. Select FabTech suspension systems are FMVSS 126-certified and come with a 60,000 mile or five year Powertrain Warranty. The reason Fabtech can afford to give such a generous warranty is that they rigorously test their products on the vehicles of real customers. They install the suspension systems on the trucks, Jeeps and SUVs of random customers for free. The customers drive the vehicles like they normally would. And Fabtech regularly checks the customer's vehicle to moniter how the suspension components are performing and enduring. It is this real world testing that gives Fabtech products the quality edge. Shop Fabtech Now