This all steel heavy duty Cargo Rack is perfect for increasing the interior carrying capabilities of the Jeep JL. The rack is located behind the rear seat creating a double deck storage area. The deck area of the rack is 22 inches above the floor and provides an additional 4-1/2 square feet of flat storage space.The three-piece design is constructed of steel plate that bolts to existing interior holes for an easy no drill installation. The rack provides a cargo carrying capacity of 150lbs. with rattle free operation. Multiple slotted holes on the perimeter of the cargo rack tray allow the use of tie down straps, bungee hooks or rope to properly secure cargo. This rack has been thoroughly tested in rugged offroad conditions and is finished in tactical black powdercoat with edge molding to prevent abrasions while accessing cargo. Fabtech’s Cargo Rack is the strongest interior rack on the market for those that want the best for their JL Wrangler.
Somewhat Satisfied. I like this product and installed it yesterday. I found the instructions a bit fague as far as the pictures go. It was difficult to see the images provided (B&W) on which side of the hard top brackets should go. I put mine over the top of the molle rack (Had to pull up the pic on the computer). The bracket arrived bent however. I will say that this was not the fault of 4WP nor the delivery service. The box was not damaged at all and was in the original packaging from Fabtech. This points to the poor inspection prior to packaging it at the manufacturer. Granted it was very easy to straighten being such thin material, another disappointment. Bottom line is the install went fine and looks good but have not used it to mount anything yet. I do think that the rack should be mounted on top of the hardtop brackets in the rear so the drilled holes in the front are not on the ragged edge of material and could break though if not careful. Do make sure to center it exactly in front due to the nut clearance under that surface. One last complaint is for the money I would like to see stainless steel hardware, this is a Jeep ya know...! I threw mine out, grade 5 screws, and bought stainless since with the roof off they are exposed to the elements. Just my thoughts and would still recommend to others as a good product.
This Fabtech Overhead Molle Panel is not a perfect fit for a 2022 Wrangler Rubicon EcoDiesel, but it will do. The drilling part on the forward area is hitting the angle part of the panel of the Jeep that putting a nut is exceedingly difficult so one of bolts is pointing up where that nut is on top while the other is pointing down and I have to be creative on putting the nut. So I still proceeded on installing the overhead and it will do for now. The panel itself is sturdy, solid and good quality.
Came a little bent where the rack bolts on to the speaker bar. Not too bad to get straightened up but still a nuisance. Other than that easy to install and will be sturdy enough for a radio and a flashlight or anything else you want to store on it.
Fabtech Performance produces quality lifted suspension systems, leveling kits and shock absorbers. The company is headquarted in Chino, California. The five-acre Fabtech campus houses the product development team and the hi-tech, state-of-the-art manufacturing facility. The company manufacturers accessories for GMC, Chevrolet, Dodge, Ram, Hummer, Jeep, Nissan and Toyota off-road vehicles as well as for UTVs. Select FabTech suspension systems are FMVSS 126-certified and come with a 60,000 mile or five year Powertrain Warranty. The reason Fabtech can afford to give such a generous warranty is that they rigorously test their products on the vehicles of real customers. They install the suspension systems on the trucks, Jeeps and SUVs of random customers for free. The customers drive the vehicles like they normally would. And Fabtech regularly checks the customer's vehicle to moniter how the suspension components are performing and enduring. It is this real world testing that gives Fabtech products the quality edge. Shop Fabtech Now
Join our mailing list to receive information on new products, special events, discounts and more!
Sign up to receive deals by email!
Sign up to receive text alerts about new product releases, exclusive access to sales, and much more!
Sign up to receive deals by text!
By submitting, you agree to receive recurring autodialed marketing text msgs (e.g. cart reminders) to the mobile number used at opt-in from 4 Wheel Parts (4WP) on 21208. Consent is not a condition of purchase. Msg frequency may vary. Msg & data rates may apply. Reply HELP for help and STOP to cancel. See Terms and Conditions & Privacy Policy