The Fabtech 8" Performance Suspension System achieves lift via one-piece cast drop down steering knuckles attaching to heavy-duty 1/4" thick, high arched lower control arm crossmembers with tubular upper control arms. Fabtechs combination of steering knuckle, high arched crossmembers and upper control arms provides an excellent ride quality with high ground clearance. This system will provide a true 8 inches of lift without adjustment to the torsion bars allowing the use of 37" tall tires. The front differential is properly relocated to eliminate front driveshaft vibration on 2001-06 vehicles with the stock driveshaft. On late model 2007-08 vehicles with Magna 1625 transfer cases the system requires the use of a CV front driveshaft to address high speed 4WD use. New tubular upper control arms fit into the stock frame pockets using urethane bushings. Upper control arms include double shock mounting tabs for integration with Fabtechs optional front dual shock hoop system. The front suspension is completed with an differential skid plate, tubular crossmember supports and impact struts while the torsion bar drop down brackets properly align the torsion bars to the relocated stock lower control arms. The rear suspension is lifted using a 4" block kit with 2" add a leafs. The system is completed with rear bump stop brackets and a rear driveshaft carrier bearing drop bracket. Clears up to 37/13.50R20 tires w/ 20x10 wheels w/ 5 inch BS w/ minor trimming.
I HAVE THIS LIFT "FABTECH 8 INCH" WITH 37"X12.50"X17" CAN I GO WITH LARGER TIRES THAN THE 37" IN A 17" OR 18" WHEEL LIKE 40'S ON 17 OR 18 INCH WHEEL WITHOUT HAVING A 3" BODY LIFT THANKS TOMMY O.
Answer this question
37x1250 or 37x1350 tires on 17 or larger wheels. If you go over 37" they will rub unless you lift your truck higher. Thanks
Fabtech Performance produces quality lifted suspension systems, leveling kits and shock absorbers. The company is headquarted in Chino, California. The five-acre Fabtech campus houses the product development team and the hi-tech, state-of-the-art manufacturing facility. The company manufacturers accessories for GMC, Chevrolet, Dodge, Ram, Hummer, Jeep, Nissan and Toyota off-road vehicles as well as for UTVs. Select FabTech suspension systems are FMVSS 126-certified and come with a 60,000 mile or five year Powertrain Warranty. The reason Fabtech can afford to give such a generous warranty is that they rigorously test their products on the vehicles of real customers. They install the suspension systems on the trucks, Jeeps and SUVs of random customers for free. The customers drive the vehicles like they normally would. And Fabtech regularly checks the customer's vehicle to moniter how the suspension components are performing and enduring. It is this real world testing that gives Fabtech products the quality edge. Shop Fabtech Now