A: Have this on my 2019 2500 and so far my temp remains the same. 

A: No.

A: No it will not block it. It extends forward a few inches.

A: I just took a hacksaw blade and cut one small piece out of each honeycomb and the mounts slid right in. If you ever decide to remove the winch mount you can’t even tell the stock honeycomb was ever touched. 

A: Use a 24mm socket wrench, remove the factory bolt and nut tabs from the frame rail to remove the factory tow hooks and crash bars. (NOTE: Tow hooks and crash bar can be removed with the OEM bumper still on the truck.) Instruction will be included.

A: could you drill holes and move sensors?

A: Yes it fits your truck but is ***Not sensor compatible

A: 2019-2021 DODGE RAM HD 2500-3500 **Recommended Winches for Large Frames: Warn Zeon, 16.5 Warn TI, or the M12,000 ***Not sensor compatible. Yes the 2019 2500 Laramie diesel is compatible.

A: The bar size diameter is 1.75" Baja Designs 1.75" Vertical LED Light Mount - # BAJ617708 || Baja Designs 1.75" Horizontal LED Light Mount - # BAJ617608

A: After going ahead and ordering the bumper I can confirm that it fits a 2022. Install was effortless (provided you have an extra set of hands to lift the bumper)

A: It bolts over the original bumper. You just remove the tow hooks and replace with the Bull nose bumper.

A: There are 2 holes on the top deck that lights can be installed in. They are on either side of the winch opening.

A: Yes it will accept all large frame winches up to 20000Lbs with ease and modifications 

A: Yes it will fit.

A: It fits my 15,500 smittybilt. Rated for 16,000, probably not?