Building on their reputation for the highest quality and design in the truck market, the Fab Fours Premium winch bumper focuses on strength and durability. This bumper is designed to be the ultimate in functionally-stylish front end protection while also providing more tire clearance to eliminate rubbing. Key features include the integrated fog and turn lights, Air Ducts, D-Ring mounts and ability to accommodate up to 12,000 lb. winches. Available in either a pre-runner guard or base bumper.
I love this bumper, it looks great, installed quickly, and was the perfect addition to my JLU frontend.
from Charlotte, NC
5.0Fantastic and Functional
This is a very well made bumper. The welds are exceptional and the fitment was spot on. All necessary hardware included is heavy duty including the winch plate. Fog light installation can be a bit tricky as space is tight but doable. Heavy duty bumper.
from Los Angeles, CA
Very easy to install and just looks awesome took about 1 1/2 to install
from Madrid Iowa
The bumper and winch look awesome but can't buy can't get the fog lights to bolt up
By Kevin P.
from Lake City, TN
4.0Simple install, but...
The bumper is well made. The welds are neat and I was able to fit it by myself, first try. Love the look!
The pictures in the directions are poor; you can't tell what bolts they are referring to. The required tools list doesn't refer to an extender for your ratchet, but there's no way you're reaching the nuts to tighten them without one.
My biggest issue is that my gladiator Sport S halogen fog lights DO NOT fit. The information given on this page leads one to believe they would. There's an adapter on Amazon that may work or I may have to replace the lights. Either way, I have to drop the bumper again - there's no way to install them with the bumper on.
Also, would it kill ya to include license plate screws or bolts?
By Jeff W.
from Gettysburg PA
It looks awesome the only downfall are putting the fog light on was the most time consuming issue. I have a 2020 willys and I didn’t need to make any mods to the stock fog lights they fit perfectly. It’s was just having to secure them on definitely need someone with smaller hands to help secure the bolts in place
5.0Very Happy with Bumper - But Need Smaller Hands
I installed this yesterday. It looks great, and feels extremely sturdy. I did the install myself, except I needed another pair of eyes just to actually get it lined up to get the bolts through the holes on the frame. It's a deep bumper, so even though I could pick it up myself, I couldn't see the bolts and holes. I had to get a second person to lay under the vehicles to help line everything up.
I think they also expect you to have children's hands. It took me over an hour to install the fog lights, just because my fingers can't reach where needed to get the nuts and bolts together and tightened. It was a struggle, but I finally got it. There will be a lot of slack left over in the fog light wiring harness, but there's plenty of room in the bumper to just zip tie it out of the way.
The holes for the bumper and winch plate lined up perfectly with my winch. I was surprised how easily that part all went together. But it did. I HIGHLY recommend putting the winch on before putting the bumper on the vehicle. Much harder to reach and line everything up once it's on, especially since you're lighting up the holes of 3 heavy pieces at one time. Also, put the fairlead onto the winch plate BEFORE the winch. You'll have a much easier time with clearance for your hands and tools that way.
The bumper sits on the vehicle with plenty of clearance, so no modifications needed for me. Once the bumper is on, putting on the washers and nuts is again very difficult unless you have small hands or long fingers. It's a very tight space to reach into.
The total install of bumper and winch took me 4 hours. But could have done it in half the time with better tools and smaller hands probably. I'm very happy with it. I think it looks great, and it feels very beefy and sturdy. It's a nice aggressive look compared to the stock bumper I had.
4 Wheel Parts was also great. I ordered the part, and picked up from the store and installed it the very next day. Before this, I had been going back and forth for 2 months with another vendor. I finally cancelled that one, and got it done with 4 Wheel Parts in one day!
from Dallas, TX
2.0Fine without winch
This bumper looks great, and was easy to install once a few modifications were made to fit the OEM fog lights. However, once a winch was installed, the entire grill was blocked, causing my jeep fan to constantly stay on. My fan NEVER kicked on until the winch was installed. I ended up having to buy a new front bumper that has an inset so that the winch sits lower and leaves plenty of room for airflow. I like everything else I've ever bought from Fab Fours
Fab Fours is the industry leader in aftermarket bumpers for off-road vehicles. The company was founded in 2005 by two friends who were off-road enthusiasts. The Fab Fours name stands for strength, durability and superior design in off-road accessories. Fab Fours products are all made in the U.S.A. using skilled steel workers, not robots. The company designs plate steel replacement winch bumpers for Nissan, Toyota, Jeep, Ford Dodge , GMC and Chevrolet. All Fab Fours winch bumpers come with fog lights and turn signals, D-ring Mounts and winch mounts and are available in 2 stage flat black powder coat or bare steel. Each bumper comes with a lifetime warranty on the structure of the product. The warranty is valid only for the original purchaser of the product. Shop Fab Fours Now