As practical as sliced bread, the Daystar? Winch Isolator stops the rattles. Installation is as easy as 1, 2, 3! Simply disconnect your winch hook, run your cable through the isolator and reinstall your hook. You're done! Once installed the Daystar? Isolator rests between your hook and the fairlead and will not interfere with winching operations.
Keeping your winch hook safe and secure is easy with the Daystar Hawse Fairlead Isolator. It works as a nice safety feature to drop the winch line, should it ever snap. Simply install, cinch, and enjoy!
By Dirt Dawg from Scottsdale, AZ
Work Great With Any Winch
By NO from Gillespie IL
Very Good Product
Work Great Have One For All My Winchs
By NO from Gillespie IL
saw these in use on vehicles
added weight to cable when in use,stoped rattle when not using,color easy to see,pulls cable in nice and tight
By chuck from arkansas
This thing is a wonderful idea however there are some major flaws. This DOES NOT WORK if you have a Smittybilt winch. The fairlead roller they supply is about .5" smaller in horizontal width, therefore i had to use a table saw to cut it down to size. also THIS DOES NOT work if you want to also add on the roller snap on license plate bracket. Does not leave enough room for the clamps to fit over the rollers. I was finally able to get it to work with my smittybilt winch and the license plate bracket but only after chopping off a total of .5" on both sides for a total of 1" cutdown. Other then those flaws, it is a wonderful product.
By Enderpie from Littleton, CO
I had read the earlier reviews that indicated some people's hook did not lay flat in this isolator. I have a Warn M8000, with the stock hook. The hook sort of snaps onto the plug in the isoloator, so it's perfectly secure, and definitely lays flat. In fact I have my front license plate mounted using the Mag-Lite brackets (a fairly common method) and it works perfectly with that, except that I had to grind away a bit from each lower corner of the isolator, so the clips had room to clear; since the isolator fills the space between the fairlead rollers.
By Harris from Denver, CO
Works like it says it does.
By Jeeper from Bay Area C.A.
OK..doesn't cure all rattles!
Not bad...did reduce some of the rattling on my winch, but not all. So, product works OK.
By utlax18 from Denver, CO
Use with my Warn VR8000 and roller fairlead. Fits perfectly, does what it advertises. Good stuff!
By Scott from Phoenix, AZ
Glad to have purchased
Keeps hook from rattling and is excellent for using as a weight on winch line.
Driven by design, Daystar has been designing and producing premium 4x4 components for nearly 40 years. Primary products for Jeeps include lift and leveling kits, dash panels and hood accessories and Daystar manufactures parts and accessories for Wranglers, Cherokees and Liberties. When factory parts are not up to par, upgrade to Daystar's line of unrivaled, ISO-certified plastic products for a variety of applications. We carry switches, isolators, bump stops and more so improve performance on the trail and for your everyday driving. When you've got the guts to go off-road, Daystar products help make your ride a revelation with unrivaled products. Shop Daystar Now