Daystar Lift Kits work within the factory suspension design, meaning that we work within the factorys design parameters to achieve an increase in ride height. Because we work within the factory design, there are not a bunch additional modifications involved that adds complexity and expense to the kit. Everything needed is included in the kit
theres everything you need and nothing you dont. If there are extra items required, such as longer shocks, its clearly stated in the application description. No Metal-On-Metal Contact - Daystar uses Polyurethane material in its Leveling Kits for a reason: Its an insulator. It absorbs the Noise, Vibration, and Harmonics (NVH) that come from the suspension and avoids transmitting them to the passenger compartment. All competitors use steel or aluminum in their Leveling Kits. If you were to take apart any factory suspension, you are going to find rubber, polyurethane, and often both in a typical suspension. These pieces are there for a reason
they absorb the NVH. Sure, steel makes a great hammer, but would you want to ride on it? Lifetime Warranty - All of Daystars Lift & Leveling Kits are backed by a Lifetime Warranty. Basically, in the unlikely event you experience a problem with a Daystar product, well take care of it. Made in the USA - All of our Lift & Leveling kits are manufactured at our plant located in Phoenix, Arizona. Most other Leveling Kits are manufactured overseas. In-house manufacturing ensures a level of quality control that no one else can match... and we have the ISO9001 certification to prove it. Top-Mount Easy-Install Design - Most late-model vehicles have gone to a strut type of front suspension. Most of Daystars applications are a Top-Mount design, meaning that our components bolt to the top of the factory strut assembly. This type of leveling kit does not preload the factory coil spring, so factory ride quality is maintained, and installation requires only simple hand tools.
It's not a Leveling kit by all means but it gave me Exactly what I needed It still has the comfortable ride just like it was stock
By Cac from Palm coast fl
product easy to install, no complaints.
By brian from erie,pa
Nice simple lift
Purchased this kit for the benefit of both a lift kit and leveling kit...satisfied with the lift, but on my 2008 jk, this kit hardly leveled the stance....the leveling factor was not of major importance to me...so I am satisfied with the lift aspect but do not buy this kit with the expectation that your jk will have a level stance...I would still recommend this kit as a great budget lift kit...running 33x12.5.17 pro comp extreme mt's with no prob and 35's should be no prob. as well.
By nemy from York, PA
A good product at a good price
Easy to install with two people, retains original ride quality, looks great on my 2010 JK with Goodyear MTR's 285/70/17. Have not had a chance to put it to the test offroad yet but looking forward to it. The only draw back is I know have a squeek I can not locate, but it is more than likely not the spacers fault.
By Scrappy from Lorena, TX
Just what the doctor ordered.
Perfect addition for the JK. Levels out the stance with a little bit of lift without compromising the ride. The JK already has a good amount of ground clearance, so this is a perfect way to give it the stance and lift for stock or slightly bigger tires.
By The Dude from San Diego, CA
easy to install
the lift was very easy to install. made enough room to put 35's under my 2007 Jeep Wrangler. only bad thing was that it did not level the vehicle out as much as i was hoping for. but all in all a great bang for the buck.
By cody from indiana
the lift kit puts the jeep at the right level, rides smooth, and sets the winch up so it does not sag the front. The installation went smoothly, the car came back perfect as new and the price was as quoted, I will be back for more,,,when I have more money
Hi. Was wondering if this lift voids warranty on new Jeeps? I have a 2014.
Danno from on
I have yet to see one void with this kit installed. Hoever, dealerships vary on this subject. Please contact your deal to be sure. Thank you.
I had a 2.5" pro comp coil lift with shocks installed. can this suspension lift be added to that if I wanted more lift?
aaron from Fort Worth, Texas on
Hello aaron and thank you for your question! if you add the Daystar 1.75 Inch Suspension Lift Kit and stack it on top of a 2.5" Pro Comp level kit the angle of the drive shaft would be too much.
Nick from Fort Worth, Texas on
for 35"tires, will any rim work or will it have to be a certain amount of back spacing?
with this kit, you wont have to trim anything, correct?
for this lift, will you have to do anything to the steering?
bd from on
Thanks for the inquiry bd, the Daystar 1.75 Inch Suspension Lift Kit part # DAYKJ09137BK, 35's will work but you'll need to run wheel spacers part # G/293-73-150 or run wheels with a negative offset approximately 4.5 inch backspacing.
Driven by design, Daystar has been designing and producing premium 4x4 components for nearly 40 years. Primary products for Jeeps include lift and leveling kits, dash panels and hood accessories and Daystar manufactures parts and accessories for Wranglers, Cherokees and Liberties. When factory parts are not up to par, upgrade to Daystar's line of unrivaled, ISO-certified plastic products for a variety of applications. We carry switches, isolators, bump stops and more so improve performance on the trail and for your everyday driving. When you've got the guts to go off-road, Daystar products help make your ride a revelation with unrivaled products. Shop Daystar Now