Daystar 1 Inch Body Lift Kit - KT04506BK


  • Daystar | Part Number: DAYKT04506BK
  • Fitment:Direct Fit
  • Lift Height:1 Inch
  • Spacer Material:Polyurethane


Daystars polyurethane body mounts are designed to maintain the proper frame/body alignment of your vehicle. They are one piece polyurethane mounts which replace your OEM mounts without the use of spacers. The kits come complete with all the hardware you


03 Tacoma daystar 1

I only needed to lift my truck a little for what I wanted to do, and the Daystar 1" body lift was perfect for the job. It was easier that I thought it would be. With two of my friends the lift went on in about five hours. Mind you, we've never done this before, and if the directions were a little clearer it would have helped on the instalation. I recomend getting this for that extra lift you need without having to break the bank. If you're worried about the ride change, don't! No change at all! There are a few things that I don't like: The body/fender washers are weak! I retightend them the other day and they bent! I know about torquing, if they weren't loose after putting on 600 + miles on then no problem. So, after tightening them I found the body washers bent. You would have tightend them up tighter if you found them as loose as I did. And for the bed blocks, if I tried to tighten them anymore I'd chrush the square tube style blocks. Not to mention the polyurethane center support blocks, there is no way to mount them. They fell right out! Think of how a pen has that clip on the cap to put in your pocket. That's how you are suppost to attach them under your bed. EPIC FAIL because they fell off!! And thus the reason for a three star rating: cheap washers, cheap bed block, poor polyurethane block design, and bad directions. Over priced for what you get. I plan to get better set of washers to fix the problem, or at least double them for support. I'll also get square aluminum bar for the bed.

from Evans Mills, NY |
Nice Look

Great if you're just trying to add a little height. The bed mounts are made of steel, had to replace them with aluminum less than three months later due to rust. If you get this kit, I recommend spraying the bed mounts with undercoating or truck bed liner to prevent rust

from Jacksonville, FL |
I would buy this produce again.

Daystar needs to sell a motor lift with the body lift.

from Lexington, OK |

Question & Answers

0 Answered question


Driven by design, Daystar has been designing and producing premium 4x4 components for nearly 40 years. Primary products for Jeeps include lift and leveling kits, dash panels and hood accessories and Daystar manufactures parts and accessories for Wranglers, Cherokees and Liberties. When factory parts are not up to par, upgrade to Daystar's line of unrivaled, ISO-certified plastic products for a variety of applications. We carry switches, isolators, bump stops and more so improve performance on the trail and for your everyday driving. When you've got the guts to go off-road, Daystar products help make your ride a revelation with unrivaled products. Shop Daystar Now

This Product Fits the Following:

  • 2004 Toyota Tacoma Base  
  • 2004 Toyota Tacoma Pre Runner  
  • 2004 Toyota Tacoma S-Runner  
  • 2003 Toyota Tacoma Pre Runner  
  • 2003 Toyota Tacoma Base  
  • 2003 Toyota Tacoma S-Runner  
  • 2002 Toyota Tacoma Pre Runner  
  • 2002 Toyota Tacoma Base  
  • 2002 Toyota Tacoma S-Runner  
  • 2001 Toyota Tacoma Pre Runner  
  • 2001 Toyota Tacoma Base  
  • 2001 Toyota Tacoma S-Runner  
  • 2000 Toyota Tacoma Limited  
  • 2000 Toyota Tacoma Pre Runner  
  • 2000 Toyota Tacoma SR5  
  • 2000 Toyota Tacoma Base  
  • 1999 Toyota Tacoma Limited  
  • 1999 Toyota Tacoma Pre Runner  
  • 1999 Toyota Tacoma SR5  
  • 1999 Toyota Tacoma Base  
  • 1998 Toyota Tacoma Limited  
  • 1998 Toyota Tacoma Pre Runner  
  • 1998 Toyota Tacoma SR5  
  • 1998 Toyota Tacoma Base  
  • 1997 Toyota Tacoma SR5  
  • 1997 Toyota Tacoma Base  
  • 1996 Toyota Tacoma SR5  
  • 1996 Toyota Tacoma Base