Crown Automotive Control Arm Bushings

A: Adrian, Unfortunately the Crown Automotive Lower Control Arm Bushing does not fit the Jeep Commander and we do not have a listing for one. Please let us know if you have any other questions. Thanks!

A: Patrick, The Crown Automotive Upper Control Arm Bushing is not tapered as this bushing needs to have a tight fit for installation. Please let us know if you have any other questions. Thanks!

A: Hi John you will need 2 of the Crown Automotive Rear Upper Control Arm Bushing to do the rear. If you have any other questions feel free to ask. Thanks,

A: Hello moose, The correct part number for that is OAI18283.07. Thank you.

A: Hi Stnpny You should not have to heat the Rear Lower Control Arm Bushing under normal instance but have seen a few times if it was rusted much. Thanks

A: Hello Glenn and thank you for your question! I have put in a request for installation instructions and soon as Crown gets back to me i will send you an email.

A: Hi brodie they do not make a bushing that mounts to the axle the bushing is in the control arm we do offer that control arm the part number is OAI18280.05

A: Hello It fits into the housing and the arm slides over it. On the rear of the front arm it presses into the arm.

A: Rob- Thank you for your question. The upper control arm bushings should be inspected at the time you pull the arm off. If you have the new style of arm with the new bushings and they are used you should probably replace them while they are out of the truck.

A: Hi Coffin this bushing fits the axle side and rear of front upper control arm

A: Hello Adam, The Crown Automotive Upper Control Arm Bushing CRO52087852 fits axle side and rear of front upper control arm. Thank you for the email.

A: Hello! Yes, this is the correct bushing for the upper control arm mounts on the front axle. Thanks!

A: Hello! Yes, this Upper Control Arm Bushing is the same for the front axle side or the rear of the front upper control arm. Thank you!

A: No, this is only the control arm bushing and no bolts are included. Thanks!

A: Hello Brad! Yes, those are the correct lower front control arm bushings for the TJ Wrangler. They fit both ends of the control arm. Thanks!

A: Brad if you have a 1997-2006 TJ with the factory control arms these bushings will work for you.

A: These lower control arm bushings are for different applications. This will fit your Grand 1999-2004 Grand Cherokee lower control arms, front or rear. Thanks!