CARR Hoop II Step

A: Yes

A: Yes, this will fit your '94 F-350 Part Number: CAR102521-1 (Single step) or Part Number: CAR102521 (Pair of steps)

A: That depends on how you have it mounted. I, too, am about that weight fully clothed. I have it bolted to my factory Chevy running board by means of threaded tubes tapped into the underside of the running board. It holds me, but I try not to use it. I added it to the passenger side for my tiny wife, who is considerably lighter! If you bolt it on direct to the truck, it'd say it's plenty strong for your weight.

A: Yes, here are the fitment: Dodge ‘09-‘22 Ram Diesel 2500-5500 All Cabs/All Doors/PICKUP BEDS ONLY | ’09-‘22 Ram 1500-5500 All Cabs/All Doors/ALL BEDS/Gas only CLASSIC BODY STYLE | ’09-’10 Ram Diesel 3500-5500 Chassis Beds only

A: Includes: 2 – Hoop II Step Castings, 4 – Mounting Brackets, 1 – Hardware pack, 1 – Instruction sheet.

A: Carr cataloging shows them as fitting your Nissan pickup yes. If you have any further need to question just contact Carr technical asst. or cataloging.

A: Sold In Pairs

A: Single Step

A: Yes it will fit.

A: You can enter your zip code here to see if there is a 4WP store close to your location: https://www.4wheelparts.com/stores/find-a-store

A: It depends on what vehicle you are installing this on. They install at the rocker panel. The bracket in the picture will be rotated 90 degrees to bolt onto the backside of the rocker panel.

A: The steps will not work with the side gas tanks.

A: They are rated for 350lbs of daily use.

A: No it does not.

A: Yes they should. Per the linked instructions they mount to back of the rocker panel.

A: Hello bmo, this Carr Hoop II XP3 Step is sold individually. If you are interested in buying this step in black as a pair the part number is 103991.

A: Hi Mark, These Carr Hoop II XP3 Steps come as a pair, you'll get two. Thank you for your inquiry.

A: Hey Schaefman, the Carr Hoop II XP3 will come with hardware. Thanks for your question.

A: Hi Woody The Hoop II XP3 Step would be 6 inch drop for the step. Thanks

A: Bob, the Carr Hoop II XP3 Step will fit all JK Wranglers from 2007-2016. Thanks for the question!

A: Tony, the Carr The Hoop II Multi-Mount System drops down around 9". Hope this helps !

A: Hey None, the Carr Hoop II XP3 Step would be a 6 inch drop step. Thanks for your question.

A: Hello zdartez and thank you for your question! Carr Hoop II XP3 Step part number CAR103991-1 is a single step for your 2013 Chevy 1500.

A: Thanks for the inquiry Rj, the Carr The Hoop II Multi-Mount System part # CAR103991 is incorrect you'll need part # CAR105771.

A: Thanks for the inquiry BBoone, the Carr Hoop II Truck Step part # is correct for your vehcile for a pair use part # CAR102521.

A: Hello Gary Yes all hardware is included for the installation. Thanks

A: Thanks for the inquiry D, the Carr Hoop II Truck Step part # CAR102521-1 they are not available in chrome but they offer a high luster polish.

A: Thanks for the inquiry MrB, the Carr The Hoop II Multi-Mount System part # CAR103992 the capacity is 350 LBS per step.

A: Thanks for the inquiry MrB, the Carr The Hoop II Multi-Mount System part # CAR103992 the capacity is 350 LBS.

A: Thanks for the inquiry Jim, the Carr Hoop II Truck Step part # CAR102524-1 the weight capacity is 350 LBS for everyday use.

A: Thanks for the inquiry Wyss, the Carr Hoop II XP3 Step part # CAR103991-1 will not fit your YJ and there are not any available for your Jeep.

A: Hi Mike The CAR102522 will not fit your 2012 Dodge Ram 2500. You need CAR107442 for a diesel and a CAR105722 for a gas powered Ram 2500. If you are a gas powered Big Dodge then the CAR107442 will fit and it is extended down 1 inch further. The CARR steps are sold in pairs and these numbers will fit all cabs and all door positions. Thank You for your question. Jon Snyder 4Wheelparts

A: Hey Chris, the Carr The Hoop II Multi-Mount System would need to have holes drilled to mount the brackets to your vehicle. Thanks for your question.

A: Hello Omar, This step will not fit your vehicle application. The correct part number is CAR104501. Thank you

A: Mark, unfortunately this particular part# does not adjust and none of the Carr Hoops swing away. Thanks for the question.

A: Sir, this is the correct step for your truck. It does have a foot note of Does not fit vehicles with saddle tanks!!! Thank you for your question

A: Mike, the Carr Hoop II XP3 is sold as a pair. Hope this ehlsp!

A: Hello Nme, the Carr The Hoop II Multi-Mount System will work on your 2004 Jeep wrangler. Thank you for your inquiry.

A: Hello David The Carr Hoop II Truck Step are not a direct bolt on and might require you to drill to make them fit properly.

A: Hello Pat, the Carr The Hoop II Multi-Mount System part# CAR103991 will not fit your vehicle. Thank you for your inquiry.

A: Hello Sorry for the slow response your question got lost in the system. Yes this step will work on your Bronco. It will bolt through the sill plate with the bracket that comes with the step. Thanks

A: Hi Dean, That Carr Hoop is for the Grand Cherokee, not designed for the Jeep JK Wrangler. Thanks for the inquiry.

A: Hello The steps are 10 inches and the bolt holes are 9 inches apart.

A: Hello Yes they work on your year truck. The bracket in the picture will be rotated 90 degrees to bolt onto the backside of the rocker panel.

A: Hello Chris, You can use the Carr Hoop II XP3 Step with sliders just make sure the mount is secure.

A: Hello crmpstr and thank you for your question! Carr Hoop II Truck Step part number CAR102522 is correct for your 1995 F-150 and drops down 6" from below the door.

A: Thanks for the inquiry John Mitchell, the Carr Hoop II Truck Step part # car102562-1 these are sold individually.

A: DW, the Carr Hoop II Truck Step is a universal application step. You can mount it wherever you want, however there will be drilling required on it. If you refer to the instructions on our website and look at Diagram D, you will be able to get a visual of the installation. I hope this helps!

A: Hello there, the Carr The Hoop II Multi-Mount System will fit a 1984 blazer. Shop with us anytime, on your schedule. Browse 4WheelParts.com, call our customer service center, or come visit us in one of our stores. You can even save on shipping costs by shopping online and picking your order up in a store. No matter which method you prefer, we’re ready to help with excellent parts, advice, and service.

A: Thanks for the question Coach Carr Hoop II XP3 Step car101241 Sorry, but this are not going to fit on your 1990 Jeep YJ. Carr does not make a direct bolt on for your Jeep. The closest we have for your vehicle is the one for the Steps for the 1997-2006 Jeep TJ. They are part # CAR102551 http://jo.my/jzb36b You will have to drill new holes to make them fit on your Jeep though. Thank you Answer box sales

A: Thanks for the inquiry Brian, the Carr Hoop II Truck Step part # CAR102521-1 is incorrect, you'll need part # CAR103991 for gas or part # CAR106331 for a diesel.

A: Hello Doug, the Carr Hoop II Truck Step part# car104811-1 does require minor drilling on the body. Thank you for your inquiry.

A: Hello Leigh Ann from Oklahoma and thank you for the inquiry on the Carr Hoop II Truck Step. This part number will not fit your vehicle, but here is a link to get you the correct part for your 2014 CHEVROLET SILVERADO: http://jo.my/ee9fxh.qrcode

A: Don, thank you for the inquiry on the Carr Hoop ii XP3 steps. The part number that you have here will not work for your 1995 Ford Bronco. Here is the link to the correct part number that will fit your vehicle: http://jo.my/h17z1v.qrcode

A: Dre, thank you for the inquiry on the Carr The Hoop II Multi-Mount System. These steps will mount and fit securely on your 2001 Jeep Wrangler.The exclusive multimount system is designed for precision fit and easier installation. Constructed of an extremely strong die-cast aluminum alloy for the ultimate in quality and durability. Thanks for ordering!

A: Hello Jenn, These Carr Hoop II Truck Step are correct for your truck. That part # is a single step part #. If you get the CAR103992 that is a pair.

A: Norb, Thanks for the question.Part # car103991-1 will fit your 93 chevy suburban 1500.

A: Hello there, the Carr Hoop II XP3 Step part number CAR103991-1 will work with a 1986 Chevy K5. The better deal is part number CAR103991 you get two. No COD I'm sorry, must be paid up front. Shop with us anytime, on your schedule. Browse 4WheelParts.com, call our customer service center, or come visit us in one of our stores. You can even save on shipping costs by shopping online and picking your order up in a store. No matter which method you prefer, we’re ready to help with excellent parts, advice, and service.

A: Ellen, Thank you for asking. Yes, the Carr Hoop II XP3 Step will fit your vehicle. This particular part number is only for 1 step, If you are looking for a pair, here is the link http://jo.my/4zffnf.

A: Laura, Thank you for asking. The Carr Hoop II Truck Step part# CAR104811 is 10 inches wide and 3.5 inches deep

A: Hello Laura, the Carr Hoop II XP3 Step is 10" wide. Thank you for your question.

A: Hello Laura, the correct Carr Hoop II XP3 Step for your application is part# Car104811. Thank you for your inquiry.

A: Hello there, It appears that CAR103991-1 will fit this truck. Keep in mind you would be looking at part number CAR103991 for a pair in witch case it would be a better deal for you.

A: Thank you for your question brent. No this part number will not fit your Ford, you will need part number CAR104812 and can be found here http://jo.my/qyuehe

A: Hello Jim , the Carr Hoop II XP3 Step part# CAR101241 drops below the rocker panel about 4 inches. Thank you for your inquiry.

A: Hello Keif, Thank you for the question. Yes, the Carr Hoop II XP3 Step Part Number: CAR103991-1 will fit your vehicle application.

A: Hi Blazer man The Carr Hoop II XP3 Step, car103991-1 will fit you Blazer. They are a body mounted step. Thank BJ

A: Hello El F150, Thank you for he question. This part number will not fit your vehicle application. We do offer the Carr Hoop II Truck Step Part Number: CAR102521 for your vehicle application.

A: Hello Bubba, Thank you for the question. Please see link http://www.4wheelparts.com/aux_incl/pdf.ashx?pdf=103991.pdf&line=CAR

A: Sandy- Thanks for the question. The max load limit for the Carr The Hoop II Multi-Mount System is 500 lbs

A: Hello NATEDOG, Thank you for the question. Yes, this will fit your vehicle application.

A: Thank you for your question JT. No these will not mount to a nerf bar. Depending on the bars you have some manufactures make a step that can attach to the bars.

A: Hello Bob4, Thank you for the question. This step fits a 2001 to 2011 GM 2500. The correct part number for your vehicle is CAR105771.

A: Hello Celo, Thank you for the question. From the 1/4 panel to the step plate its 5"

A: Hello, these steps mount through the floor body material, so if the factory running board steps are in the way there's a chance they might not mount with out removing them . Thank you!

A: Thank you for your question. We do not have a bed step that will match your current bars, what we do have is the hitch step that can be found here http://jo.my/tw6qx6 This step does not match your current steps but will retract and hide when not in use http://jo.my/3iy1yt but with the dually you will need to order http://jo.my/t7ant6

A: Travis- Thanks for the question. The Carr Hoop II truck steps are sold individually.

A: The Carr Steps are sold individually and universal from side to side.

A: Hello, the Carr Hoop II XP3 platform dimensions: 7" long x 3-1/2" wide; Drop: 5"; Weight capacity: 500 lbs; Quantity: 2 steps; Limited lifetime warranty Thank you!

A: Hello! Yes these Carr step hoops come as a pair. Thank you!

A: These steps are permanently mounted in the down position and are not adjustable.

A: These steps are made to mount through the floor board. They have a metal reinforcement plate that goes on the inside floor to give more strength.