Bushwacker Extend-A-Fender Flares

A: Yes but you have to pay way to much I ordered thinking it was both front and rear paid close to $300.00 only got rear I’m not paying $600 for plastic fender flares there are cheaper better options available 

A: Part Number: B/W40012-01 - FENDER FLARES EXTEND-A-FENDER STYLE 2PC REAR FENDERS USE: Part NUmber: B/W40901-01 - Bushwacker Chevrolet/GMC Extend-A-Fender Flare 4PC Set (Paintable) - Additional Details: Front Flare Height: 3.25 | Front Flare Tire Coverage: 1.75 | Rear Flare Height: 3.25 | Rear Flare Tire Coverage: 1.75 | Style: Extended

A: Sorry we don't carry fender flares for the '07 Dodge Durango. The Bushwacker Dodge Durango Extend-A-Fender Flare Set (Paintable) - 51904-02 fits the '98 - '03 Dodge Durango.

A: 70901-02

A: My 94 4Runner has factory running boards and all I had to do is trim Some of the plastic with a utility knife and it turned out great. I did have to remove the chrome trim around the fender wells before installing the the fender flairs, but fit perfect for me.

A: 2004 - 1995 Toyota Tacoma 2WD & 4WD

A: That is the factory turn signal that you re-use from the OE flare.

A: No they will not fit.

A: Installs neatly in minutes with minimum drilling

A: Front part number is here: https://www.4wheelparts.com/p/bushwacker-chevrolet-gmc-extend-a-fender-front-flares-paintable-40007-01/_/R-BDMQ-40007-01

A: So basically, the answer is “not much.” The 50904-02 fits a few more model years than the 50912-02 (50904-02 fits 02-08 Ram 1500 & 03-09 Ram 2500/3500 while 50912-02 fits only 06-08 Ram 1500 and 06-09 Ram 2500/3500). Also, technically the 50912-02 has a front flare height of 4.25” while the 50904-02 has a front flare height of 5”. Both provide 2.25” of front flare tire coverage.

A: Width/Coverage: 1.75 Inches

A: We do not stock these. We would ship them from the vendor. To see if they have them in stock, please call Toll Free: 1-877-474-4821

A: Hello Ty, Yes, this fender comes with a rubber welting that keeps the flare front destroying the factory paint. Thank you.

A: Hello Stacey I checked with Bushwacker and they will not work on the ZR2 package. Thanks

A: Hello Tony, No, this part number is only for the front driver and passenger side flares. Part number B/W20076-02 is for the rear set. We also offer the B/W20928-02 for the complete front and rear set. Thank you for the question.

A: Thanks for the inquiry Bill, the Bushwacker Chevrolet/GMC Extend-A-Fender Flare Set part # B/W40901-01 is incorrect you'll need part # 40903-11. here is a link to the manufacturers website. http://jo.my/lmgwnc

A: Jim, unfortunately for the Dakota they don't sell just the rears and it looks like the set will only fit crew cab models only. thank you for your question.

A: Laura, everything you need to complete the install is in the flare set. thank you for your question.

A: Thanks for the question. These fender flares will not give extra clearance for the tires to fit 33/12.50 tires unless you trim your factory steel fenders to fit a 33/12.50 tire. They do give you extra coverage for these tires. Thank you.

A: Yes we can get them color matched but mud flaps aren't made to really work with these.

A: Hello Gary, So sorry about the confusion. Bushwacker part# B/W40901-01 are 1.75" wide, not the 2.5" that our website states. B/W40901-01 includes Front Pair Part # 40007-01 Rear Pair Part # 40008-01

A: Thanks for the question. Bushwacker Chevrolet/GMC Extend-A-Fender Flare Set The front fender flares will work, but the rears will not work on a step side . Thank you

A: Yes this would be the way to go if you have the bushwhacker extenda fenders on the rear already.

A: Thanks for the inquiry Grandpa Steve, the Bushwacker Ford Extend-A-Fender Flare Set part # B/W20926-02 are not designed to work in conjunction with after market flares.

A: James from Bartow,Thanks for the question.Part # B/W41907-11 will work on your 4 door Tahoe

A: Hello Ross, the Bushwacker Chevrolet/GMC Extend-A-Fender Flare Set part# B/W40945-02 will fit a vehicle with oem flares once they are removed. Thank you for your question.

A: Hello Roscocamp, The Bushwacker Ford/Lincoln Extend-A-Fender Flare Set includes front and rear flares.

A: Rooster,Thanks for the question.Part #B/W40945-02 I have in stock in California & should only take 2-3 days to get to Mariposa.

A: Hello Steve from Slidell, Louisiana and thank you for the inquiry on the Bushwacker Toyota 4Runner Extend-A-Fender Flare Set. With this flare installed you will have 1.25" in tire coverage, what that is over the stock size you will have to take a measurement of your stock flares to compare. Please use this link to get back to the ordering page: http://jo.my/ckm7nq.qrcode

A: JD, The Bushwacker Chevrolet/GMC Extend-A-Fender Flare Set work with most aftermarket bumpers. Really depends on if your bumper extends past the original bumper.

A: Bob, Thank you for asking. The Bushwacker Chevrolet Extend-A-Fender Flare Set part # B/W41907-11 will not fit the ZR2 model. According to Bushwacker, when you remove the factory flares and try to install their flares, the mounting holes will not line up.

A: Hello Jennifer, Thank you for the question. This part fits your vehicle: 1996 CHEVROLET TAHOE BASE V8 - 5.7 Liter - GAS

A: Ikaika- thank you for your question. You will no longer be able to use your factory mud flaps with the Bushwacker Chevrolet/GMC Extend-A-Fender Flare Set on your 2005 2500HD 4x4

A: Hello Allen, Thank you for the question. We offer the Bushwacker Street Flare B/W41502-02 and the Bushwacker Extenda-A-Fender Flare B/W41907-11 for your vehicle application.

A: Scott- Thank you for your question. Yes the Bushwacker Chevrolet Extend-A-Fender Flare Set will fit your 99 Chevy S10 ZR2.

A: Hello chevycrew, Thank you for the question. This part number fits the Fleetside (78.0), Fleetside (78.7) and the Fleetside (97.6) Bed Length. The B/W40925-02 fits the Fleetside (69.3) Bed Length

A: Scott- Thanks for the inquiry. The Bushwacker Toyota 4Runner Extend-A-Fender Flare Set does not include a door flare section shown in the instructions. The instructions are for many vehicles, hence the note in the instructions that states the door flare section and retainer are not included in the 31907 part number kit. If you are having an installation issue Bushwacker techline may be able to help at (800) 234-8920

A: Hi Doug The flare goes to just over the body line approximately 3" depending on style. thank you

A: Junbug- Thanks for asking. You can find the matching Bushwacker front flares for your 1994 Chevy Silverado 1500 Step side here http://jo.my/f406do

A: Nilo- thanks for asking. if your factory installed running boards do not interfere with your factory fender flares then the Bushwacker Extend-a-Fender flares should not have any issues.

A: Bryan- Thanks for asking. These ship directly from Bushwacker to you. They are located in Washington so the delivery time should be a fairly short time frame. These are the widest flare we offer for a Stepside Silverado 1500.