Bushwacker Cut-Out Style Fender Flares

A: Yes. Good stuff. I wouldn’t hesitate on buying. 

A: Toyota Tacoma 95.5-2004 Extended Cab/Standard Cab | Set Part # 31919-02 | Location: Front & Rear

A: They are really close to being the same. They come with rubber gimping and self tapping screws , so if holes don’t line up the gimping will cover the old hole anyway. The black self tapper screws look nice, but you could re rivet. Hope this helps. 

A: The rivet bolt pattern is included in this Style Flare. https://www.4wheelparts.com/sku/Bushwacker/standard/B-W_30002-07_INS_1.pdf

A: It should since it’s a 1st gen

A: They did not fit mine without some modifications to the wheel well

A: The price is for 2 rear fenders.

A: Please review: https://www.4wheelparts.ca/sku/Bushwacker/standard/B-W_20005-07_INS_1.pdf

A: If you are going to have a shop do the installation, I would double the cost of the flares and you will be close.

A: Using larger Tires may increase the area required to turn the vehicle. Some Tire/Rim combinations may require lowering bump stops and or installing steering stops to prevent tire from contacting flare. Instructions: https://www.bushwacker.com/images/ePIM/original/BWRibwf-20940-02.pdf

A: BED TYPE: Styleside only

A: 2002 TOYOTA TACOMA: SUBMODEL: Base | BED TYPE: Fleetside | BODY STYLE: Access Cab Pickup | Part Number: B/W31919-02 - This product fits your vehicle!

A: Hello Chelcbrynn, These (B/W31019-11) are for the front (so just a pair). If you are looking for the rear flares, part number B/W31020-11 (also just the pair). Thanks for checking us out.

A: No, installation requires cutting and drilling

A: Yes it requires sheet metal to be cut out for install.

A: Hey, The truck in the photo is just to show how the fenders look installed. Thanks!

A: Hello Shara The B/W40019-11 is a pair of front flares that are a cut out style. These are for having very large oversized tires and require a lot of cutting and modification to install. If your vehicle is stock or has slightly larger tires then I suggest B/W40900-01. This is the part number for the set of 4 flares which is front and rear pairs. These flairs have a nice clean look. They come out about 2 inches and then angle back up to the body. These are fairly easy to install and attach to uncut stock fenders. Thank You for your question. Jon Snyder 4Wheelparts

A: Hello James, You will need to cut the fender out to install this flare. Thank you.

A: Hello Rick, Yes, the Bushwacker Cut-Out Style XJ Cherokee Fender Flare Set Part Number: B/W10911-07 does require cutting sheet metal. Please see "Instructions" tab on product page. Thank you for the question.

A: Thanks for the inquiry tr, the Bushwacker Ford Cut-Out Rear Fender Flares part # B/W20044-02 this is just the rear pair, the part # for the front pair is B/W20043-02.

A: Hello Timothy, You remove almost 2" or material in the front (rear portion) wheel well and 1" in the rear. Please click on the grey "Instructions" tab on the product page for more details. Thank you.

A: Hello spike, The Bushwacker Chevrolet/GMC Cut-Out Front Flares B/W40019-11 comes with one front passenger side flare and one drivers side flare. For the rear of the vehicle you will need to purchase part number B/W40004-11 in addition. Thank you.

A: Hello jshaffer, Provided it's a factory feature, the Bushwacker Toyota Cut-Out Rear Fender Flares B/W31010-11 will come with a relief pocket for the gas cap/panel. Thank you.

A: Hello Mike, Yes, the Bushwacker Toyota Tacoma PreRunner Cut-Out Fender Flare Set Part Number: B/W31919-02 will fit your vehicle application. This kit comes with front and rear flares. Thank you.

A: Hello pfx1000, You will need to follow the cutting instructions exactly. The fender flairs are no pliable. Thank you.

A: I have no rear flares for a dually because it has the dually bed with the custom bed sides. I can how ever just sell you the front set if you like.

A: Hello Brian and thank you for your question! Bushwacker Chevrolet/GMC Cut-Out Front Flares will give you more tire clearance.

A: Hello Hernani, Thank you for asking. The Bushwacker Cut-Out Style Grand Cherokee Fender Flare Set are 20LBS (44"X24"X15")

A: Thanks for the inquiry pat, the Bushwacker Cut-Out Style XJ Cherokee Fender Flare Set part # B/W10911-07 bushwacker makes vehicle specific flares, we wouldn't know how they would fit on another vehicle.

A: Thanks for the question Charlie Bushwacker Toyota Land Cruiser FJ -40 Cut-Out Rear Fender Flares B/W30002-07 Yes, these will fit the rear of your vehicle. Thank you Answer box sales

A: Hello Kevin, the Bushwacker extenda flares are available for your stepside truck http://jo.my/3hk3a9 these will help you achieve that off road look you are going for. Thank you for your question.

A: Thanks for the inquiry Eric, the Bushwacker Cut-Out Style XJ Cherokee Fender Flare Set part # B/W10911-07 will fit on all XJ's 4 door.

A: Thanks for the inquiry tyler, the Bushwacker Ford Cut-Out Front Fender Flares part # B/W20073-02 akready come in OEM matte black (paintable).

A: Hello No name, thank you for your question about Bushwacker Ford Cut-Out Rear Fender Flares has a flare height of 5" and tire coverage of 4.5". I hope this answer gets 4 Wheel Parts your business!

A: Thank you for the question JohnE. The Bushwacker Ford Cut-Out Front Fender Flares, part # B/W20043-02 are only the front pair. In the description the rear pair is showed as a listing depending on what size the bed of your truck is. These cut out fender flares are designed to give more clearance by actually cutting the fender of the truck to make it larger and wider, while the Smittybuilt Flares are bolt on and only give wider coverage. Thank you

A: Kamron, The Bushwacker Ford Cut-Out Rear Fender Flares only include the rear flares but there is another option to get them all together.

A: Hello Mike, Bushwacker Ford Cut-Out Rear Fender Flares do require you to cute your fender flares out to install the fenders. Part # 20046-02 the the pair for the rear of your 2005 Ford Super Duty.

A: Hello Eric, Thank you for the question. The Bushwacker Ford Cut-Out Rear Fender Flares Part Number: B/W20074-02 will fit the 5.4 foot bed.

A: Chandler- Thanks for the inquiry. Your local 4 Wheel Parts store can install this set of Bushwacker Cut out fender flares. Please contact your local store for an accurate labor quote.

A: Hello Steve, Thank you for the question. This part fits your vehicle: 2003 FORD F-150 PICKUP XLT V8 - 5.4 Liter - GAS

A: Mike- Thanks for the inquiry. The Bushwacker Ford Cut-Out Front Fender Flares will allow you to run a bigger tire on your 1999 Ford F-350 Super Duty without fender clearance issues. You will still need to worry about inner fender / frame clearance issues without installing a lift.

A: Hello Jorden, Thank you for the question. The Bushwacker Chevrolet/GMC Cut-Out Front Flares B/W40051-02 run a tire 2" taller in diameter.

A: Hello Josh, We have one of our 4Wheel Parts stores at 2701 W. Expy 83 McAllen, TX 78503. You can place your order here online and receive free shipping to that store. The part numbers you need are (Front) B/W40009-11 and (Rear) B/W40010-11. Thank you for the question.

A: Michael- Thanks for the question. Bushwacker does not offer individual flares at this time for the Cut-Out Flares for your 1994 Jeep Cherokee. This part number front pair is the cheapest option. Bushwacker does not allow us to discount the price on these.

A: Bo Bo- Thanks for your question. The Bushwacker Chevrolet/GMC Cut-Out Front Flares will give you an additional 2.5" of coverage on your 1987 Chevy short wheel base pick up with a 4 inch lift and 39.5R15 Super Swamper LXT SX or Boggers.

A: Thank you for your question. You you will be able to use the Bushwacker Ford Cut-Out Rear Fender Flares on your 1998 F150 Flareside.

A: Peter- Thanks for the inquiry. What size tire the Bushwacker Cut Out Fender Flares will cover will depend on the size/offset/Backspacing of your wheels. They will offer 5 inches of additional coverage over your stock fenders.

A: Hello DRay, They do not offer this fender flare in a chrome finished. thanks for the email

A: Tony- Thanks for asking. The Bushwacker Cut Out Fender flares should give you the clearance you are looking for on your 1998 Chevy K1500

A: Bambam- Thanks for the question. The Bushwacker Chevy Silverado Cut out fender flare set comes in a matte black finish with can be primed and painted any color by your local auto body shop.

A: Boom- Thanks for the inquiry. Bushwacker does not offer a full set of cut out flares for the Dually version of the 2009 Chevy 3500HD but they do offer the front set by itself here http://jo.my/eidaoz and yes we will ship to Thailand

A: Steve- Thanks for asking. Here is a copy of the installation instructions for the Bushwacker Toyota Tacoma Pre-Runner Cut Out Fender Flare Set http://jo.my/ch3ycy I looked through them and it appears there is very minimal cutting necessary to install them on your Tacoma

A: This part number B/W40009-11 Bushwacker Chevrolet / GMC Cut-Out Fender Flare Front Pair is just the front flares. If you would like the rear Bushwacker Chevrolet / GMC Cut-Out Fender Flare you can find them here http://jo.my/5wo1so

A: You would need the Bushwacker Fender flare Gimps part number B/W000040-01 to replace the worn units on your pocket flares on your extremely sexy 2004 F-250 Harley Edition Extended Cab Short Box

A: The Bushwacker Chevrolet / GMC Cut Out Front Flares are only the front flares.