Bilstein B8 5112 Suspension Leveling Kits

A: Thats a Dodge part number. Whats the Ford part number for rear matching? Thanks

A: Part Number: 24-302043 | Position: Rear | Notes: -For Rear Lifted Height: 0-1" -Without Air Leveling Suspension.

A: Adjustable track bar recommended

A: No

A: This leveling kit will accommodate 35 x 12.50 x 20 tires however, it will only work with an after market rim with an offset that will keep the 12.50 width from rubbing 

A: Yes. Mine do not rub at all with the factory wheel. I could have fit 37’s. 

A: BILSTEIN B8 5112 high performance leveling kit provides more ground clearance, increases wheel travel, and allows for up to 35" tires.

A: Yes, the Billstein B8 5112 and B8 5162 will both  fit the 2021 Ram 2500

A: Not yet, Ram 2500 2021-2014 | 4WD models | Diesel engines only

A: Give us a call - Sales & Support - 877-474-4821

A: Yes it will fit.

A: Adjustable track bar is recommended Icon Suspension Front Adjustable Track Bar - 214214 Synergy Manufacturing Heavy Duty Adjustable Front Track Bar - 8704-01

A: Part number is 24-285667

A: Bilstein lists 2”-3” of lift. It will depend on the weight of the front end...engine size, bumper, push bar, etc...The heavier the engine and accessories, the lower the overall lift achieved.

A: Yes

A: Yes it will.

A: Yes it will fit.

A: Per Bilstein application guide, the 46-241641 is the better fitment. Bilstein does not explain the differences, but the differences would most likely be spring rate or shock valving.

A: Per Bilstein application guide, Use 46-241641.

A: We have 11 kits. Enter your vehicle information here and you will see what kits we have that fit: https://www.4wheelparts.com/b/suspension/suspension-leveling-kits/_/N-cm5j1

A: No it will not fit.

A: No you do not

A: This leveling kit only fits the 14-18 Ram 2500.

A: According to my mechanic the change of degree was within tolerance and did not need a track bar change.  I have been running about a year now on my ram 2500 without issue

A: No it will not. It is made for the heavier Diesel engines.

A: The Bilstein shocks and coils are designed to carry same weight as factory shocks and coils.

A: Hello Manny, With this kit you would get maybe an 0.5"/1" lift in the back, and about 2.5"/3" lift in the front. The purpose of the kit is to level the front of the truck to the back of the truck. Thanks for checking us out.

A: Hi Leo, According to the instructions for this Bilstein B8 5162 Suspension Leveling Kit there is no need to relocate or drop the front stabilizer bar. Instructions can be found on our site or from Bilstein directly