Bestop Replace-a-Top Soft Tops

A: I would need more information in order to determine the correct rear window for you, I would need to confirm that you do have a Bestop Replace-A-Top and I need to know what year your Jeep is. If you still need help with this, feel free to email me, crystal.dennis@bestop.com.

A: This replaced my factory installed soft top on my 2015 JK unlimited.  I reused all my original equipment including screws.

A: We do not offer just the door skins from the 2 Piece Soft Doors, I apologize.

A: Romennose, the Bestop Replace-a-Top with Tinted Windows cleans very easily especially when cleaned with the Bestop cleaner located here: http://www.4wd.com/Jeep-Exterior-Parts-Accessories/Soft-Top-and-Accessory-Care-Kit.aspx?t_c=3&t_s=424&t_pt=3677&t_pn=BST11205-00 Hope this helps!

A: Hi bricknut, This Bestop Replace-a-Top with Tinted Windows fits the original framework the Jeep had new, the easiest way to verify your Jeep has OEM hardware is above the doors it should be snaps, however if it's felcro instead that's an aftermarket top. Thanks for your inquiry.

A: HI Bob No the Replace-a-Top with Clear Windows will not fit the hardware. You would have to go with a Bestop Supertop BST51595-01 or the Tiger top BST51405-01. Thanks

A: Jim, the Bestop Replace-a-Top with Tinted Windows will fit your Jeep just fine, but this does not come with upper door skins which is why it says that 01 and newer models won't match- but will still fit. Thanks for the question!

A: Hi Pat Thier is no color strip in the quarter windows on the four door Black Twill Replace-A-Top onlt the two door. Thanks

A: Hi Michael, This Bestop Replace-a-Top with Clear Windows is specifically designed for the OEM bow bars, snaps and hardware so if your CJ has the original location snaps this top should fit great. Thank you for your inquiry.

A: Hey X, the Bestop Replace-a-Top with Clear Windows will not work with the supertop frame. You would have to have factory framework for this top. You will have to get factory hardware or buy another supertop. Thanks for your question.

A: Hi Orf The Replace-a-Top with Tinted Windows is made to be used with the factory soft top hardware. If you don't have that the top will not work. You could use the BST54720-15 that would include the hardware or BST56820-15 Trektop NX Thanks

A: Hey Jr, the upper door skins can be ordered by part number BST53121-35. Thanks for your question.

A: Rusty, the Bestop Replace-a-Top with Tinted Windows best quality material would be the Twill top, followed by Sailcloth, then your standard Black denim and diamond material. I hope this helps!

A: Hi Ole That is just the replacement skins no hardware is included with the Replace-a-Top with Clear Windows. Thanks

A: Ole Blue, the Bestop Replace-a-Top with Clear Windows does not have a door option to match. Your best option would be to get a Supertop with doors. It can be found here: http://www.4wd.com/Jeep-Tops-Jeep-Top-Accessories/Supertop-with-Two-Piece-Soft-Doors-and-Clear-Windows.aspx?t_c=75&t_s=459&t_pt=3382&t_pn=BST51597-04.

A: Hi Robert, This Bestop Replace-a-Top with Clear Windows fits the OEM bow assembly bars the Jeep would have came with new, the easiest way to determine if your hardware is stock is to view the Jeep from the side. If you see the black bow assembly bars through the side windows then it is aftermarket and this top won't fit. Hope this helps, thank you for your inquiry.

A: Hello Mike, This specific part number is for the Spice color. The part number BST51120-15 is for Black. The part number BST51120-09 is for Charcoal Denim. Thank you for the question.

A: Hello Jeepster, Yes this Bestop Replace-a-Top with Clear windows will work with the 55004-01. If you have anymore questions feel free to ask, Thank you.

A: Hello Bill Here is a link to the warranty on Bestop products. http://www.bestop.com/support Thanks

A: Sek, the Bestop Replace-a-Top with Tinted Windows is designed to be used with the factory original hardware. It's not hard to take the top off and replace the skin with the new one. Hope this helps!

A: Hello Marcela, This will require all of the factory frame and hardware to install. This only comes with the complete soft top material, two side and rear windows. Thank you.

A: Thanks for the inquiry Keith, the Bestop Replace-a-Top with Tinted Windows in Matte Black Twill part # BST79841-17 as long as you have the OE Jeep hardware this top will fit.

A: Hello STICK, Yes, the Bestop Replace-a-Top with Tinted Windows in Matte Black Twill will allow you to open and close the rear door without upzipping the top. Thank you.

A: Hi Doug, This top from Bestop uses Haartz 18oz factory-matched color fabric that is stain and mildew resistant. Thanks for the inquiry.

A: Hello, They do not offer the black twill uppers the color closest to that is black diamond. If you have anymore questions feel free to ask, Thank you.

A: Hi Dan No the Replace-a-Top with Tinted Windows in Black Denim does not fit the sunrider hardware only factory stock hardware. Thanks

A: Thanks for the inquiry daniel, the Bestop Replace-a-Top with Clear Windows in Black Denim part # BST51121-15 only come with the skins no frame.

A: Zach, the Bestop Replace-a-Top with Tinted Windows in Matte Black Twill is one of the best quality tops that are on the market at this time. The Twill is the thickest soft top material you can get which makes it both durable and quiet. I hope this helps you!

A: Hi Judy The rear windows roll up on the Replace-a-Top with Clear Windows in Black Vinyl the do not zip out, on the doors the windows zip down. Thanks

A: Hi Roch If there are 5 snaps that hold the top to the bar that goes from the windshield frame back that would be factory hardware and also if the rear corner on the upper door frames are squared off that would also be factory hardware. If the rear corner is rounded or the top is held to that bar with Velcro it would be after market hardware. Thanks

A: Hello Iram, Thank you for asking. The Bestop Replace-a-Top with Clear Windows in Black Denim is 32" x 9" x 9" and is 21 lbs. I hope this helps you.

A: Hello, You will have to cut the fabric off of the old frame. Then this will slide over the frame and seals up with Velcro. If you have anymore questions feel free to ask, Thank you.

A: Hello, This top is way thicker and more durable than any other material made. It has a three layer design. If you have anymore questions feel free to ask, Thank you.

A: Lara, the Bestop Replace-a-Top with Tinted Windows in Matte Black Twill is exactly the same as the factory top on your Jeep. It has zippers for all of the windows. The only snaps on the top are the ones that secure it to the bows on the inside of the Jeep. Let us know if you have any other questions. Thanks a lot!

A: Hi Lloyds You might want to make sure the windshield frame is in the proper position for the tension on the top. I was not able to find the factory measurement but the super top measurement is 75 1/4 inch on the angle from the windshield frame to the tailgate. Also make sure the hardware is factory style hardware and not for a different top. Thanks

A: Hi Julia, Jeep switched over to the black diamond in 2003 so that will be the original color for your 2005. It's got a little more shine and is a deeper black than the black denim, but there is no difference in quality or longevity. Thanks for the inquiry!

A: Hello Kenneth, Thank you for the question. Yes, the three rear windows unzip from this top.

A: Hey Patteou, the Bestop Replace-a-Top with Tinted Windows in Matte Black Twill does not include doors so it will work with full steel doors. Please let me know if you have any other questions, thanks. My name is Devin at extension 835.

A: Jeff- Thank you for your question. The top to fit your 83 cj7 can be found here http://jo.my/xh3hap

A: Rose- Thanks for the question. I contacted Bestop and they are not offering the matching front door skins separately for the Replace-a-Top with Tinted Windows in Matte Black Twill at this time.

A: David- Thanks for the question. The Bestop Replace-a-Top with Clear Windows in Black Denim are the same dimensions as the OEM factory top.

A: TG- Thanks for the inquiry. I contacted Bestop to see if they had a part number for replacement upper doors for the Replace-A-Top in matte black. They informed me they do not offer them separately at this time. They did tell me that you can use the black denim upper door skins that you can find here http://jo.my/d5kmij and that they will fit with your top.

A: Hello Robbie, this does include the top, half front side windows and the back window. It includes everything you need if you have the factory hardware and upper door frames. Please let us know if you have any further questions, thanks.

A: Hello! Yes, this is about as close as you can get to the original soft top material that came on the Jeep when new.

A: They do sell just the upper skins for YJ/TJ/JK wranglers but not for the CJ. You can get full soft doors part number BST51778-15

A: Mike, the issues with this Bestop Replace-a-Top? with Tinted Windows is not really a fitment issue. Actually since you have full steel doors it won't be an issue at all. This top is in Black Denim the 2001 may have had Black Diamond fabric from the factory. Basically this top texture may not match the soft door uppers.

A: Hello, this top BST51124-37 is not sailcloth it is the regular spice denim fabric. If you would like the Sailcloth Replace-a-Top it is #BST79124-37 and you can find it here: jo.my/tj_sailcloth_replacement ? Thank you!

A: Hello, this Bestop Replace-a-Top with tinted windows is made with the standard denim material is not Sailcloth. Thank you!

A: The Bestop Replace-A-Top will work with your half steel doors as long as you have all of the factory hardware for the soft top. This top will work with the upper half door sliders and your lower steel doors without issue. Again, just make sure you have all of your factory hardware for the soft top and everything will work perfectly. Please let us know if you have any further questions. Thanks.

A: This Bestop Replace-a-Top? with Clear Windows does not have tinted windows. It is only available with clear windows at this time. Thanks!

A: Yes, this Bestop Replace-a-Top with Tinted Windows will fit your Jeep with factory steel half doors. Thanks!

A: This Replace-a-Top includes everything you need including windows and half door skins. As long as you have your original factory hardware, you should be good to go. Thanks!

A: Hello Freebird, This package ships at 16 pounds.

A: NO, this is a factory style replacement top to fit on the factory hardware. A Sunrider top is a complete top with hardware and the front section flips back to open air for the two front seats.

A: Yes, this replacement top comes with all three windows and upper door skins and top skin. It uses the factory soft top hardware and bow assembly over again.

A: I actually have 17 of these tops in stock. But the side windows are not removable. I don't see where Bestop have any thing that has removable windows for a Sidekick.

A: There is a difference in the soft top hardware. For a 99 I would recommend this top. http://www.4wd.com/Jeep-Tops-Jeep-Top-Accessories/Replace-a-Top-with-Clear-Windows-by-Bestop-for-Jeep.aspx?t_c=75&t_s=459&t_pt=3382&t_pn=BST51127-15

A: Well thank you for coming back to possibly buy again. Unfortunately Bestop doesn?t offer individual doors. But they do offer a solution that includes both doors, specifically #BST5179037.