Bestop HighRock 4x4 High Access Front Winch Bumper (Black) - 42918-01

Specifications

  • Bestop | Part Number: BST42918-01
  • Width:Full
  • Light Mounts Included:Light Mounts Included
  • Winch Mount Included:Winch Mount Included
  • Finish:Textured
  • Material:Steel
  • D-Ring Mount Included:D-ring Mount Included
  • Position:Front
  • Fitment:Direct Fit

PRODUCT OVERVIEW

Developed specifically for the hard core rock crawler, the HighRock 4X4 Front Jeep Bumper feature high-access design for greater off road clearance. D-ring mount are fully MIG welded. Mounting brackets for factory JK fog lights are included. All bumpers are E-coated and are finished in black powder- coat. Offers predrilled mount holes for common winch bolt patterns. Grill Guard part numbers: Black 42915-01 and Chrome 42915-00

Related

Reviews

4.3
4.0
Replaced OEM

I hit a deer and wanted to change my front bumper. It really does improve the look of the front of the jeep. I bought the bumper alone without the brush bar. I plan on adding that and a winch but it looks good even without those. The bumper is heavier but I don't notice any difference in the performance or gas milage.


from Pittsburgh, PA |
5.0
HighRock 4x4 High Access Bumper and Bull

Bumper was received with some damage to it, due to poor packaging, unable to tell if caused by shipper or UPS but bumper was sticking through the box when it arrived. Bull Bar/light bar has not been received due to being on back order


from Deland, Florida |
5.0
Great Bumper and so easy to install

This bumper was very well priced for what you get. I was a bit nerves about doing the install myself because we all here the crazy install story's about having to drill holes that aren't there, make the holes bigger that are there, heat up parts so you can beat on them enough to make something fit. This was amazingly easy. I did it all myself and did not have a single issue. Everything lined up perfect and everything was in the box and fix perfect. I'm not a big review writer but I had to say something about this very well made easy to install bumper. One thing that had everyone confused was that we all thought the grill guard bar came with the bumper. It DOES NOT. No big deal it is easy to install as well and looks great on there so I suggest added that.


from Keller Tx |
5.0
Quality product!!!

Very nice bumper looks like OEM on the Jeep. I was missing some small parts upon arrival and Bestop sent them right out no questions asked. Very satisfied...


from West Virginia |
4.0
Looks Great

Easy to install, looks great, and a much better option for a winch than the stock bumper. I agree with the pervious comment regarding to rather small "nuts" to hold the thing on. The other issue is the lack of a light mounts on the back side to fill the holes with something other than the stock lights, and once the plastic pieces that come with it break, I might be SOL. So I will take a closer look at it when that time comes. The winch mount works well, and the addition of the brush guard makes a "tuff" looking Jeep. Picture doesn't have winch hooked up, but its ready to go now and pulls like a mule.


from Colorado Springs, Co |
3.0
Nice looking bumper

I really like the look of the bumper but was disappointed that the mounting bolts are smaller than the original factory bolts. Hopefully the winch won't yank the bumper off at some time. I was a little put off in that the install instructions for the fog lights was incorrect. I also didn't like the lock nuts that were supposed to be part of the light install were actually regular nuts.


from Phoenix, AZ |

Question & Answers

5 Answered questions

I'm ordering the #BST42918-01 in satin black, which grill guard will fit this bumper?

Asked by caymanfire from on

Thanks for the inquiry caymanfire, the Bestop HighRock 4x4 High Access Front Winch Bumper in Black BST42918-01 you can us part # BST42906-01 BACK or BST42906-00 CHROME.

Answered by from on

I have a 2013 wrangler unlimited sport. Will I have to relocate the vacuum pump? Thanks.

Asked by caymanfire from Cayman Islands on

Hello caymanfire, Yes, you will need to relocate the factory mounting of the vacuum pump on all 2012 and newer Jeep Wranglers. Thank you.

Answered by from Cayman Islands on

Is this bumper heavier than the stock bumper? If so, how much heavier? Also, what is the vacuum relocation kit for?

Asked by AB from Gilbert, AZ on

Hello AB, The Bestop HighRock 4x4 High Access Front Winch Bumper in Black BST42918-01 is 105 lbs. The factory bumper is about 35 lbs. Thank you.

Answered by from Gilbert, AZ on

See all questions & answers

Manufacturer

Your Jeep's top reflects personal style and protects against the elements of sun, rain, snow and mud and Bestop's soft tops are popular choices for replacing OEM soft tops. Whether it's a tough top that will be exposed to harsh elements or a refined one that you think fits your Jeep's style better, Bestop has the track record and the complete line to make your journey more memorable. A classic Supertop, Bikini or Halftop or Sunrider instantly transforms your 4x4, providing protection, ventilation, tinting and maintaining its shape through temperature fluctuations. Easy to attach and easy to get attached to, Bestop is the premium brand when it comes to Jeep tops. Shop Bestop Now

Promotions