Banks Heavy-Duty Stainless Steel Monster Exhaust system cuts back pressure up to 98% and flows up to 176% better than stock. The streamlined intermediate pipe and tailpipe are formed of stainless, heavy-wall tubing with constant-diameter bends to maximize airflow and lower exhaust gas temps.
Toss the clamps and replace with NAPA clamps
You will need to add longer rubber hangers
System installs nicely
By Jeep Guy from Mue Shoals , Alabama
Getting what you pay for
I'm going on 1 year of having my Banks exhaust installed and figured it was now a sufficient amount of time to give a review since it has gone through one winter and one summer.
Fitment is good. Quality of brackets I have found that they aren't so good. Several times they have come loose resulting in rattles and then uneven support from the clamps caused an exhaust leak. Replaced supplied brackets and replaced a rusty hanger on my Frontier and now I'm enjoying the system. Sounds great when you step on it, quite when you don't. The only real Gripe I have is that the 3inch piping is too big which results in lost back pressure. Def downshift more now going up hills. Prob better off going with 2.75 piping. The supplied Y pipe is fantastic and really opens up the restrictive flow from stock
By Wdsk_Nismo from Shokan, NY
Love the sound, nice fit, stainless steel materials, it completes the jeep no complaints.
By Gregg from Hudson Valley NY
Not overly impressed with the sound, but there isn't much that can be done with a six cylinder. Sounds good but not great. The engine does run cooler and it did help take the idol hesitation out.Response for a six cylinder is a lot better.
By old blue from georgetown tx.
Excellent cat back system!
Installed easily. Sounds great. I don't have access to a dyno so I don't know exactly how much power my Tundra gained by installing this cat back system, but it definetly has more!
By Rich from Lebanon, NH
Sounds awesome, and gave me noticeable improvement in power and gas mileage. Extremely pleased with fit, look, and sound of this system!
By coote from Canaan, NH
banks monster exhaust
good sound at wide open throttle
not too loud but you can hear it at 55 mph
Large tip gets extremely hot
By pete from Oakdale Illinois
Excellent fit, super easy install
Great kit with everything you need for installation. Everything went together with an OEM quality fit. Entire exhaust is not stainless steel as the ad led me to believe. Only the tip and the muffler are stainless steel, but they are polished quite nicely and the whole kit looks and sounds great. Gave my exhaust the deeper rumble I was looking for without being obnoxious. I'd recommend the kit to others looking for a quality stock replacement.
By mattcm32 from Charlotte, NC
Bought to replace existing damaged exhaust cat back. Looking at it I was worried it would be to loud but not much different than stock levels.
By 909kenu from Los Angeles, CA
Banks Monster Exhaust
Perfect exhaust system for me.Sounds near stock at idle with rumble off idle and more roar when you get into it. Definately not too loud and obnoxious. No cab drone. Well engineered. No cutting of pipes required.
The GBE48640 is California Legal. Thank You for your question.
Jon Snyder 4Wheelparts
2004 tj rubicon 4.5 inch re long arm.will this exhaust bolt on. thanks
donnyd from canada on
Yes, the Banks Power Monster Exhaust GBE51314 will fit your vehicle application. Thank you.
from canada on
I want to order the Banks Monster Exhaust PN 49764 for my 2008 Dodge 3500 4x4 CC/SWB 6.7 Cummins. The Banks site and all the other online retailer sites say it is the correct part for my truck. Your site says it won't fit. Can you confirm it will fit? I want to order from you guys and I want the Banks...the previous MBRP unit rusted through in no time, but the Banks Monster Exhaust on my other vehicle still looks like new.
Bruce from Calgary, AB on
Yes, the Banks Power Monster Exhaust System GBE49764 will fit your vehicle application. Thank you.
Headquartered in Azusa, California, Banks Power was a byproduct of Banks Engineering, established over 50 years ago. Its decorated history of breakthrough innovations in gas and diesel engine advancements includes drivetrain and turbocharging and high performance products for gas and diesel systems. Among its Jeep products are sidewinder turbos, exhaust manifolds, tuners and programmers and cold air intakes. Whether you're turbocharging, trying to boost exhaust flow and reduce backpressure or optimizing engine efficiency, Banks Power's impressive lineup of parts and accessories are durable enough to weather the stress and perform under extreme duress. Shop Banks Power Now