This heavy bracket is designed to replace the factory trackbar bracket for improved link geometry with crossover steering on the front 30 and Rubicon 44 axles in the Jeep TJ, LJ, XJ, and ZJ. If you've changed your steering, you need to match your trackbar to make it parallel to the draglink. This bracket gives you several options to find the perfect geometry. The 1/4" thick CNC precision cut and formed components of this setup ensure a quality, heavy duty solution. NOTE: This bracket offers several raised trackbar holes. Every lift is different and some trial and error may be necessary to find the ideal ride. This bracket is NOT bolt on and requires welding. This bracket will also require modifying or fabricating a new trackbar itself since it will be slightly shorter. This bracket attaches to the axle next to the factory coil perch.Joint width is 1.65", so use our Narrow Misalignment Spacers with 7/8" Heims if you are building your own Trackbar.
Artec Industries is based in Salt Lake City, Utah, but its origins are an American success story based in Tucscon, Arizona. The owner, Artie Nuttall, married into a family of off-roaders who quickly infected him with their enthusiasm. So much so that Nuttall took a welding class at a community college so that he could complete DIY axle swaps on his rig in his garage. Turns out he had a talent for welding and in 2010 Artie successfully marketed a line of battery mounts. From there, Artec Welding turned into Artec Industries and though the product line and success grew, Nuttall's attention to craftsmanship and quality never wavered. Shop Artec Industries Now