Dual cylinder design makes this the high flowing portable compressor at 6.16 CFM (no load) and 4.65 CFM (at 29 PSI)
Integrated aluminum air tank and pressure switch regulates pressure between 135 PSI and 150 PSI
Mounted in a waterproof carry case constructed from a durable impact resistant polymer
Convenient compartments for storing air hose and other compressor accessories
Ducted IP55 sealed brushed DC cooling fan and anodized aluminum motor mounting brackets effectively dissipate heat from the motors, heads and electronics allowing for a 100 percent duty cycle (under room temperature conditions)
Includes: water proof case, twin compressor, air tank, canvas organizer, 20 feet air hose, inflator and blow gun
This compact vehicle mounted compressor has been designed to do everything! Activate your ARB Air Locking Differentials, air up a 35 inch tire in less than a minute and run air tools. This 100% duty cycle, 6.16 CFM compressor is built to support all of your compressed air needs. Includes a full wiring harness, air locker solenoid terminals, OE-grade compressor isolating switch, mounting hardware and instructions.
Comes with nicely setup wiring harnesses and activation switch. The power supply harness is about 6' long and the actuator harness is about 10' long.
I mounted this in the bed of a pickup under a metal cover. I feel it would be a little loud to use in the passenger compartment. Might be okay if you can put it behind/under stuff that will muffle the sound.
Airs up 37" tires from 15psi to 32psi in less than 2 minutes per tire.
Can't wait to get an air tank so I can use this compressor for more things. Seems like it will work great.
Only complaint would be that it doesn't come with any type of air fitting, just an 1/4"NPT port. Not a big deal and I knew this was the case before I bought it. I mention it more as heads up for future buyers that you will need to plan on at least buying an air coupler with 1/4"NPT male end. I opted for the ARB Inflation Accessory Kit.
No regrets with this product.
By MrK5 from Colorado
Fills my 35's quick, runs my impact & air ratchet. Great unit.
By Eissiendraken from Victorville
the alpha and the omega of compressors
this compressor is for those who want the very best of what is offered. for the size, it is a beast. it will fill up my 35s in under a minute and a half without a tank, with a tank it takes a minute from 5 to 35 psi. mind blown with how awesome it works. it is a little large for under the hood of a jeep, but fits perfectly under the seat of an XJ. It is quiet, high output, beast looking, and you can snorkel it for all your underwater applications.
By Lindsey from Houston, TX
ARB Twin Compressor is fast!!!
At first I hesitated buying the ARB Twin Compressor as I had one of their first compressors, around 1997, which was slow and broke down shortly afer the warranty ran out. But after looking at the Twin Compressor I liked the quality of construction, the mid range amperage draw,the quality of the electrical connections, and that it comes with the complete wiring harness that runs from the compressor to the dash swiches.
Install was very easy, the only part that took some thinking was where I was going to make a hole in the firewall to pass the harness through. I mounted the compressor in the engine bay (95 Wrangler) on the passenger side. It's plumbed to a 2.5 gallaon air tank and the compressor comes with a pressure switch that closes at 135 psi and opens at 150 psi.
I have 31X1050 mud terrains on my Jeep and from 0 psi to 32 psi, the compressor was able to fill the tire to 32 psi in exactly 1 minute and 5 seconds. The outside temperature was 68F degrees and the elevation is 300 ft.
I'm very impressed and pleased with this twin compressor setup. The included wiring harness made installation a breeze. ARB has winner in their twin compressor offering. I'm very satisfied with my purchase.
Will this mount under a hood of a chevy colorado? And can it air up 37 inch tires and run airtools?
sasquatch from newfoundland canada on
Yes, this will mount under the hood of your vehicle. It can air up 37" tires. To run air tools will require adding a minimum of a 1.5 gallon air tank. Thank you for the question.
from newfoundland canada on
I need an air compressor to top up the air suspension bladders on a 1973 GMC motorhome. Will this compressor produce 120 psi?
Ken from Vancouver, BC on
Ultra compact twin motor, dual cylinder design makes this the high flowing portable compressor of its size on the market at 6.16 CFM (no load) and 4.65 CFM (at 29 PSI). Integrated aluminum air tank and pressure switch regulates pressure between 135 PSI and 150 PSI which is suited to most air powered tools. Mounted in a waterproof carry case constructed from a durable impact resistant polymer; the carry case has convenient compartments for storing the air hose and other compressor accessories
Ducted IP55 sealed brushed DC cooling fan and anodized aluminum motor mounting brackets effectively dissipate heat from the motors, heads and electronics allowing for a 100 percent duty cycle (under room temperature conditions). Kit includes: Water proof case, twin compressor, air tank, canvas organizer, 20 feet air hose, inflator and blow gun. Thank you.
from Vancouver, BC on
What is the max PSI output?
Marc from on
The safety cut off switch is set at 150 psi that is the max it will go up to.
ARB has been manufacturing 4x4 parts for over 40 years. ARB Air Lockers will amplify the traction of your 4x4 on challenging trails. They give the off-road driver what she needs in traction, control and performance. ARB believes in its products so it offers a five year, unlimited mile warranty across the air locker range. ARB 4x4 Accessories includes the suspension system brand Old Man Emu, maker of premium off-road shock absorbers. Old Man Emu premium shocks are developed and tuned specifically for each vehicle application. They come complete with vehicle specific mounting kits for fuss free installation. ARB parts are all developed, engineered and fabricated in-house in Australia. Shop ARB 4x4 Accessories Now