Very nice lights..They look good and function even better. I am very satisfied.

Major upgrade from factory headlights on my 2001 Jeep XJ. Plug and play. Put in my new bulbs with these housings and can see significantly farther and wider down the road. Highly recommend this product.

Used for H4 conversion on a 1987 4Runner. Solid beam pattern and quality glass lenses. Would buy again.

Designed to emulate European "E" coded headlights, commonly known as ECE, off road use only, not D.O.T compliance, manufactured in Japan by IPF part no. 820H, marketed in north America by ABR part no. ABR820H for right hand traffic including U.S.A! 7X6 (142mmX192mm) rectangular, 2-lights system, single headlamp accepts H4 halogen, H4 LED bulb! Direct O.E replacement for factory sealed beam H6054 often used in Toyota pickup 80's, 90's series! Double coated high reflectance reflector heat resistant material, top coated for durability suitable for rally or professional racing! Full realization of bulb's energy allowed by parabolic reflector! Lens prism, column cuts meticulously calculated to produce 15 degree left cut up beam suitable for all night driving conditions! Light from reflector transmitted and dispersed in an even beam by highly transparent lens using either H4 halogen or H4 LED bulb for clear, powerful beam pattern! Heat resistant silicon dust boot prevents dust and moisture condensation also prevents blurring of bulb and lens! Items added for headlights upgrade including: (1) Kaslight 1Set 2 Headlight Harness H4 Headlight Relay Harness H6054 H4 Relay Harness Toyota Pickup Headlights H4 Wiring Harness Headlight Relay Kit For Toyota 95-97 Tacoma 88-95 Pickup Fix Dual Ground Problem! (1 pair) Alla Lighting Mini FL-BH 12500 Lumens Newest H4 9003 LED Headlight Bulbs Dual Hi/Low Beam High Power 90W Xtreme Super Bright 6000K Xenon White Conversion Kits HB2 Replacement for Cars, Motorcycles! (preferably since LED bulbs produce less heat which prolongs and extends headlamps lifetime) Headlights adjustment performance by Toyota service center using optical aiming tool, strongly recommended when replacing factory sealed beam H6054 with this IPF820H H4 headlamp! Headlights adjustment is also recommended when different brands, types of H4 halogen or H4 LED bulbs used to achieve the best possible beam pattern accurately aligned, aimed!

The old sealed beam lamps that these replace don't provide much light. These do! I installed these along with hella h4 bulbs. They are nice and bright with a tight pattern. These are glass so should handle easily the heat of the bulbs better than plastic. They have a rubber seal that goes on the back to help keep water out. Other than the fact that I added automotive relays and upgraded the stock harness to minimize the voltage drop to the lamps these were a direct replacement. Night driving is much safer with this upgrade.

To get the most out of this product, I recommend the ARB harness upgrade that puts battery voltage right at the headlights and you don't lose voltage through the factory headlight switch. With the upgrade, that switch only operates the relays. If you use the ARB harness, the regular 65W/55W bulbs are plenty of light. I don't know why anyone would want more. A fantastic improvement over the factory setup.

These actually went in to a 1985 AE86 toyota. I upgraded to HIDs and selected the IPF housings instead of the Raybrig housing ebcause of about a $50 price difference. I cannot imagine the Raybrigs being any better. Lenses were crystal clear, boot covering the bulb was tight and solid, and they bolted straight in with no problem. Graet product!