When you're off-roading, it is inevitable that obstacles and hazards will be encountered that could potentially inflict expensive damage to your differential. To prevent this, ARB offers one of the most highly-regarded and know differential cover on the market today. Using high tensile nodular iron, it has been engineered to protect the differential and ring and pinion set from any off road hazards. Features: Computer optimized cross brace design increases the structural rigidity of the whole axle. Additional housing strength helps keep the ring & pinion gears meshing on the flat faces of the teeth, greatly increasing ring & pinion life and overall maximum load strength. Top quality, high power neodymium magnets are used in both the Drain Plug and the dipstick to collect metallic wear particles as the vehicle moves. Magnet location in the end of the dipstick allows the oil to be checked For tell-tale signs of Internal damage.
The ARB is a good looking product, but better yet, it services a good purpose. It is stronger than the OE cover, but I mainly bought it because it has a magnetic drain plug with dipstick. This makes service much easier.
By dieselenthusiast from Zuni Mountains, New Mexico
ARB Dana 44 diff cover
for the cost should come with a new gasket and should fit without grinding.
By steve from Midland, Tx
Heavy duty definitely compared to OEM. Best need three hands to hold it and gasket up.
Added gasket material stopped leak from rock damage that form a gasket failed to.
Needed to remove some metal on driver side so it would fit next to springs.
By Dozer from Salt Lake City, Utah
Dana 44 Differential cover
I installed this diff cover to replace the stock one on my 2007 Jeep Rubicon. I was a little hesitant at first after reading some reviews about rubbing issues from the bar that goes across the the front diff. I took about 2 hours to drain and install the cover on my 2007 Jeep Rubicon. It does was it is supposed to do. I also installed it using a lube locker and so far no drips.
By Ameise00 from Anaheim, Ca
2006 Jeep Rubicon Unlimited Diff Cover
These covers were easy to install - only required minimal modification of the air lines for the lockers, but easy to move. Quality is excellent - these are heavier than stock, but knowing that, they exceeded my expectations for sturdiness and heaviness. Used with the Lube Locker gaskets and Lucas Oil per factory specs. No leaks - look great!
By Bob from Colorado
super strong diff cover
It really has strong magnets to collect metal
also has a dipstick with magnet
best of all a drain plug so easy to check and drain if you go to deep
By 440whp from olympia, wa
Solid looking cover
Finish looks very good and seems to be durable. Very thick and heavy construction, appears to be nearly as strong as the rest of the differential housing. Dipstick and drain plug are nice touches.
By 1995 XJ from Sioux City, IA
Have narrowed d44 with spring over and does not fit. Comes in contact with spring perch and u-bolt. Nice product just check to see if it fits before you buy.
By bnejo from SLC, UTAH
Great Product Tough as Nails
Love the dipstick and the drain bolt
By Chris from North Bend OR
Good solid diff cover. It will take a hard hit. I bought it because of the magnetic dipstick. I like the idea of being able check for water and metal filings in the oil with out tearing the cover off every time I go through water off road. A con is the price compared to other out there. The bolts strip easy so be careful. I followed their torque instructions and striped a head. Also no stickers. For the price I would expect good bolts and a sticker.
Will this cover fit my front differential on my
2015 F 250 SRW 4x4 Crew Cab Super Duty
6.7 L PowerStroke V8 Diesel
Their is a seal that would eliminate the gasket compound
Magdi from CA on
Yes this is the correct cover for your F250 with the Dana 60 axle.
Rody from CA on
Will this work on a 1984 Chevy K10?
Hilooii from on
Yes, this will fit your vehicle application. Thank you.
Will this fit on my 1988 K5 Blazer front axle?
Ken from San Antonio Tx on
No the front and rear cover are different on the 10 bolt axles. Blue Torch Fab has a steel cover for your axle. Here is a link to it.
part number BTFBTF11012
ARB has been manufacturing 4x4 parts for over 40 years. ARB Air Lockers will amplify the traction of your 4x4 on challenging trails. They give the off-road driver what she needs in traction, control and performance. ARB believes in its products so it offers a five year, unlimited mile warranty across the air locker range. ARB 4x4 Accessories includes the suspension system brand Old Man Emu, maker of premium off-road shock absorbers. Old Man Emu premium shocks are developed and tuned specifically for each vehicle application. They come complete with vehicle specific mounting kits for fuss free installation. ARB parts are all developed, engineered and fabricated in-house in Australia. Shop ARB 4x4 Accessories Now