Al's is a polyurethane/acrylic batch system. The kit includes polyurethane resin, acrylic binder, activator, tint and primer. Also included mixing paddle and squirt nozzle for primer. Al's can be applied at any thickness in virtually any texture or color. Simply pour components B,C and tint into Component A and mix. You can also mix smaller amounts. We offer a customized spray gun or roller/brush kit for application. Al's offers several accessories and additives to make prep easier and to customize the look and finish of the coating.
I ended up having to order a second kit to complete my bed. F150 5.5 foot bed. The bed I have is small compared to regular 6.5 foot average beds and one kit would not even make an extremely light coat. I was under the impression thathat this product was equal to the professional grade bed liners. I was wrong It's alot easier to peal off then the real stuff. I see the quality as being the same as what all regular auto parts stores sell, except this kit is three times as much. The sprayer worked great but if I did it it again I would buy the 20$ stuff from [@]and spray that stuff in and save my money. Or spend like 100$ more and get the real pros to do a rino/linex spray bed liner.
from Memphis, tn
5.0Tough as nails at 1/4 the price
This product is as described. I have done an entire K5 Blazer in and out, over a year ago. Coating has not faded scratched peeled or chipped. Follow the directions to a T, do your research on spray technique and you will fall in love with this product. Time to do my new truck bed!!!!!!!!!!!
4.0looks good, and seems pretty tough
follow the directions with the kit. keep your air pressure at 25-30 psi and hold gun 18 in. from surface. only pull trigger 1/3 in on the als spray gun and you will get a finish as nice as linex.by 2 kits for a full size truck bed, one kit ain't enough. seems tough but we will see.
from fayetteville, n.c.
4.0I am going to buy this product again
sprayed the entire body of a 2005 powerwagon and it took 3 gallons.
only one gallon can be sprayed through gun before it needs to be cleaned, due to pot life.
easy to do if you are going to spray a bed, but takes a little practice if you want to spray a body.
will run on vertical surfaces
from copenhagen NY
4.0instructions didnt specify
the instructions didnt specify that if you are rollering the product u should mix it in batches
from modesto ca
5.0This stuff is great
I used Al's liner to coat the exterior of my 85 4runner. Al's liner has a very nice texture and was pretty easy to spray using the Als liner spray gun. Definitely a much better product than most of the other DIY bedliners on the market.
Hello Eric U, The Als Liner 1 Gallon Black Bed Liner Kit needs a light sanding in order for it to bond correctly.
How do you prep over rust?
Can the liner be applied to plastic with a plastic primer?
What paint tint brand or supplier do you recommend for custom tinting ALS Liner?
2002 Ford Explorer Sport
Answer this question
Here are the instructions, i hope this helps http://jo.my/3fxova
Scorpion Protective Coatings developed a hit in 1995 with its high-solids coating that didn't need to be applied with pricey machines and was highly customizable for a wide range of applications. Industrial contractors loved it so much that they asked Scorpion Protective Coatings if it could be applied to their work truck beds. Scorpion tweaked their formula just a little and in 2008 Scorpion introduced Al's Liner DIY truck bed liners to the consumer retail market. It didn't take long for Jeep owners to get in on the trend and start using Al's Liner products to line their Jeep tubs and we carry many of their parts. Shop Als Liner Now