Alloy USA Axle Shaft Kits

A: Front Dana 30 | Jeep CJ 82-86 | Wide Track | Chromoly Axle Kit

A: The Alloy USA Dana 35 Chromoly Rear Axle Kit - 12201. This 27 spline Dana 35 chromoly rear axle shaft kit from Alloy USA fits 94-98 Jeep Grand Cherokee ZJ with ABS and rear disc brakes. Measurements - Left Hand Rear 30.35 Inch 27 Spline. Right Hand, 28.85 Inch 27 Spline.

A: No - this fits: 1971-1980 International Scout 1971-1980 International Scout II

A: Comes with studs and seals indeed

A: This would be 5x4.5. It is a Dana 35 axle kit.

A: No, it will not fit the drivers side drop

A: Hello Casper The ALY12201 is compatible with ABS brakes and your stock tone rings will fit right on. Thank You for your question. Jon Snyder 4Wheelparts

A: Hello It does both sides of the front Dana 30 inners and outers. thanks

A: Thanks for the question JT Dana 44 Chromoly Rear Axle Kit aly12156 Yes, this kit will come with both driver and passenger side axles. Sorry, but the bearings do not come pressed on the axles. Thank you Answer box sales

A: Hello None of the Alloy rear kits are not machined for the tone ring. The aftermarket axle companies don't offer since very few Dana 35's had ABS brakes. Most Jeeps only have front ABS.

A: Hello I don't have any of the lengths for the Marlin axles. The CJ's also have a 5 on 5.5 lug pattern and i think the Marlin is the 5 on 4.5 pattern.

A: Hello Jeff They do not install the bearings or seals on the Alloy kit. They don't supply the outer retaining with there kit you must reuse your retainers off old axles. The G2 kit does include the retainers but not installed also. With the G2 kit you could have a local machine shop or parts store press them together ahead of time.

A: Hello johnnywalker, Thank you for the question. This part number is for a pair of Dana 35 rear axle shafts.

A: Hello Bart, Thank you for the question. This is for the driver side only of the narrow track AMC Model 20 axle.

A: Hi Scooter This kit does not have locking hubs it just has a larger stub axle that requires larger uni-bearings. A better option would be to purchase the G/2 axle shafts individually http://jo.my/hfa4sk and http://jo.my/oh9yfa Then get the MileMarker kit will retain the factory 5 on 4.5" bolt pattern http://jo.my/6mb85a This will get you inner and outer chromoly axle shafts and locking hubs that you are after. Thank You

A: icrazyhorse- Thanks for the quesiton. This Alloy USA Dana 30 Chromalloy Front Axle Kit is a 30 spline inner and 27 spline outer.

A: Hi Alan The measurements are from the spline end of the shaft to the center of the U-Joint hole. i measured a U-Joint and divided it in half and subtracted a 1/4" for the band of metal around the u-Joint and came up with a 15.34" short side and a 35.156" long side axle shaft. i cannot find anything that will work with that axle housing that is off the shelf. i am afraid that you may need a custom set of Currie or Moser axles to fit your housing Thank You

A: Hi Allen If you send me your inner axle lengths we can double check the to make sure you get the correct axles for your truck.the standard 80-92 axle lengths are driver 15.8" and passenger 32.12" the 74-79 are driver 33.19" and 14.69" even though the pumpkin is on the other side the axles shafts can switch sides. ford and Chevrolet axles can also be used if length is correct . please check your lengths and let us know thank you

A: Ben the ALY12135 is in stock in California and only 1 in Florida warehouses. we will be able to have them at your door in 5 days or less if we still have the 1 in Florada when you place the order other wise it will come out of California thank you

A: Mars the Alloy USA Dana 44 Chromolly Front Axle Kit for the Jeep JK Wrangler will not require an installation kit to install the axle shafts but i would recommend getting a set of outer tube seals to keep dirt out of your axle tubes and ruining your inner axle seals. http://jo.my/7zmvei thank you

A: The Alloy USA Dana 44 Chromalloy Front axle kit is 30 spline inners and 19 spline outers. If your 1972 Chevy Blazer has the 1/2 ton Dana 44 this kit will fit. I would recommend new axle seals to go with your new axles.