AirLift 1000 Air Spring Kits

A: will not lift your truck - Up to 1,000 lbs. of load-leveling capacity | Eliminates squat, trailer sway, rough ride and bottoming out. Providing suspension support when using a front snow plow or in-bed camper. Adding air springs to the front coil springs helps to eliminate squat, poor headlight aim, body roll, and bottoming out the problems frequently faced when plowing or using a truck bed camper. Simply add air when loaded up or preparing to use a plow for a safe and comfortable experience. With the added stability that air springs provide, you can put your truck to use safely with the support you need.

A: Air Lift 1000 Heavy Duty Coil Spring Part Number: AIR60818HD Works with existing suspension to eliminate problems frequently faced when towing and hauling.

A: They do not list any other parts on their site for that vehicle so I'm not sure this would work. However they do list this as universal. I would call our sales team or each out to AirLift to be sure: Toll Free: 1-877-474-4821

A: Hello John, Using the part finder on the AirLift site, it says to try part number AIR60905. The AIR60905 is designed to fit springs with an inside diameter of 3.5" and a length/height of 9.5". It appears there is not bag for ID 3.5" and H 11". Thanks for checking us out. Here is a link if you would like more info https://www.airliftcompany.com/workshop/air-lift-1000-universal-air-spring-kit/

A: We do not know the pressure output form factory compressor. You will need to contact Bilstein.

A: The Airlift 60769 is an coil insert. It should work with stock and lifted applications.

A: 2007 to 2018 JKU has two versions of air bags. ( I prefer Firestone kits ) 4173 for non-Rubicon and 4172 for Rubicon. Firestone, nor Airlift make a lifted version. The bags are 5.50” diameter 8” long for Rubicon 7” for non. They can still help some for load stability.

A: Hello Brett, Yes, the Air Lift 1000 Rear Coil Spring AIR60728 will fit your vehicle application and configuration. Thank you for the question.

A: Thanks for the inquiry Slinger, the Air Lift 1000 Load Assist Rear Spring Kit part # AIR60817 these will still work you'll just have a small gap because of the 1 inch shim.

A: Hello Chris, The coil spring will need to be removed from the vehicle to install the Air Lift 1000 Coil Spring Part Number: AIR60818. Thank you.

A: Hello tye, Yes, they will fit inside that coil spring.

A: Thanks for the inquiry alvin, the Air Lift 1000 Load Assist Rear Spring Kit part # AIR60820 is for a Jeep, we don't show this product available for your vehicle.

A: Thanks for the question. Air Lift Air Lift 1000 Front Coil Spring No, these will not work on the front of the 4wd Dodge 1500. Thank you

A: Hello Darren, the Air Lift Air Lift 1000 Front Coil Spring part# AIR80765 Will not lift the truck any higher than stock but it will also not let the front sag any lower as well. Thank you for your question.

A: Hello This bag is designed to go inside your stock coil spring. It is a very simple install about one hour to do. There is no drilling required for the install also.

A: Hello Byrd-man, airlift does offer a compressor system that can be setup to toggle on and off at certain heights. This would be called the smart air. Thank you for your inquiry.

A: Hello Cris, Air Lift Air Lift 1000 Rear Coil Spring AIR60769 will not fit with factory installed air suspension. Fire stone make FIR4186 that is for the air suspension for '08-'14 Cadillac Escalade.

A: Hi Mile you will need to measure the spring length at ride height then we can find you an appropriate air bag to fit them without spacers. Thank You

A: Bubba- Thanks for the question. The Air Lift 1000 Load Assist Rear Spring Kit is for stock height only.

A: Brian- Thank you for your question. The Air Lift Air Lift 1000 Coil Spring kit part number AIR60815 contains 2 bags, air line and fittings.

A: Hello Scott, Thank you for the question. The Air Lift 1000 Load Assist Rear Spring Kit AIR60754 will not reduce axle articulation. They are designed as a helper spring to assist with heavier loads.

A: Ragavan- Thanks for the inquiry. The Air Lift 1000 rear coil spring is not compatible with the 2012 Toyota Etiso

A: Hello Bing Mendezona, The dimensions are: 4.9" x 10" Thank you for the email.