4 Wheel Parts Factory Tacoma Sliders with Rear Kickouts - 61648W


  • 4 Wheel Parts | Part Number: 4WP61648W
  • Fitment:Direct Fit
  • Finish:Textured/Matte Black
  • Type:Formed Plate Guard with Standoff
  • Installation Type:No Cutting or Drilling Required


The 4 Wheel Parts Factory Toyota Tacoma Bumpers, Sliders and Exterior Accessories are the ideal solutions for the customer who wants all the benefits of increased vehicle off-road capability without sacrificing on-road drivability. This complete package allows you the flexibility to build your rig to your specific needs and set your rig apart from the crowd.

The Rock Sliders with Kickout are the perfect side protection solution for the customer who wants to get after it on the trail without sacrificing their OE footprint. The sliders have an integrated rear kick out to push the truck bed away from obstacles when contact is made, helping to protect your rig. Not only do the sliders provide a sleek design that flows with the OE body lines and increases protection but also provides a secure mounting position for rock lights to help navigate the trails in low light conditions. Each slider comes fully powder coated to be trail ready out of the box.

Customer Reviews

4.2 4.2
5 Customer ratings

Customer Images

4.0 So far, so good

Seem to be built well and feel solid. We’ll see how they holds up on the trail. I gave the sliders 4 stars because the installation instructions were a bit hard to follow. Overall, very happy with them so far.

from Albuquerque NM |
5.0 great product!

bought this for my 2019 tacoma and couldnt be happier! didnt take long to install and was surprised on how slick it looks on the truck. very low profile!

from greenville SC |
5.0 Great install

Product was very easy to install. Install time with 2nd person was about 2hrs. Welds were very clean. Top plate is very strong and doubles as a side step to get into the truck. Color matches very well with Cement Tacoma.

from Portland, OR |
4.0 Nice looking, packaged well, heavy duty feel

I bought these at the Ontario Show for my 18 Tacoma. Installed myself using some jack stands, floor jack and my rolling chair. Much easier if you have two people. Designed to bolt right up unless you add the two bolts to the frame to make it HD as it says in there install. You have to drill for those. Driver side there is a bracket that you replace to give you bigger studs. Those holes did not align super well; had to do some clearancing. The directions were missing a step about having to unclip the big wire loom at the front of the cab before mounting. The mounts in the frame have T handles on them to use to adjust easier for alignment with bolting. You will probably want a pair of vise grip plier for the front one inside the frame to hold it. Just was not quite long enough to hold and see what you are doing. The passenger side was easier. Missing a step in the directions for one of the brackets that gives you a stud for bolting through an existing hole in the frame at mid cab. Other wise I would say you will need a floor jack to manipulate the slider for hole alignment.

from Highland, CA |


Question & Answers

11 Answered questions

Q: would these fit a 2017 access cab? Answer this question

A: To correct generic Dave who seems to only go with short answers, the DCSB or the 5ft bed and the ACLB 6 ft bed have the same chassis which would answer my question of do these trucks share the same mounting points. since the chassis are the same length technically this slider should work and since the slider stand off from the vehicle there should not be any fender interference.

Answered by Kris on 08/31/2021

A: Short bed models only

Answered by Dave from 4WP HQ on 08/31/2021

Q: Can this slider support the weight of the truck ? Answer this question

A: It was tested with 800+ pounds.

Answered by Dave from 4WP HQ on 10/26/2021

Q: Can anyone explain why this is for the 5ft bed only? are the mounting points different if not wouldn't this work with a 6 foot bed? or an access cab with a 6 ft bed? Answer this question

A: Hello and thank you for your question, our Engineers these sliders to fit and work specifically for the Toyota Tacoma, Double Cab/ Short bed configuration. We cannot confirm fitment or functional use of this product with any other Toyota Tacoma configurations.

Answered by Kelly from 4WP Corporate Headquarters on 08/31/2021

Q: is there any installation instruction or video? Answer this question

A: Not at this time.

Answered by Dave from 4WP HQ on 08/05/2021

Q: Are these DOM or HREW? Answer this question


Answered by Kelly from 4WP Corporate Headquarters on 07/29/2021

This Product Fits the Following:

  • 2021 Toyota Tacoma TRD Sport  
  • 2021 Toyota Tacoma TRD Pro  
  • 2021 Toyota Tacoma TRD Off-Road  
  • 2021 Toyota Tacoma SR5  
  • 2021 Toyota Tacoma SR  
  • 2021 Toyota Tacoma Limited  
  • 2021 Toyota Tacoma Trail  
  • 2020 Toyota Tacoma SR  
  • 2020 Toyota Tacoma TRD Pro  
  • 2020 Toyota Tacoma TRD Sport  
  • 2020 Toyota Tacoma Limited  
  • 2020 Toyota Tacoma TRD Off-Road  
  • 2020 Toyota Tacoma SR5  
  • 2019 Toyota Tacoma TRD Sport  
  • 2019 Toyota Tacoma TRD Pro  
  • 2019 Toyota Tacoma TRD Off-Road  
  • 2019 Toyota Tacoma SR5  
  • 2019 Toyota Tacoma SR  
  • 2019 Toyota Tacoma Limited  
  • 2018 Toyota Tacoma SR  
  • 2018 Toyota Tacoma SR5  
  • 2018 Toyota Tacoma Limited  
  • 2018 Toyota Tacoma TRD Sport  
  • 2018 Toyota Tacoma TRD Pro  
  • 2018 Toyota Tacoma TRD Off-Road  
  • 2017 Toyota Tacoma Limited  
  • 2017 Toyota Tacoma SR  
  • 2017 Toyota Tacoma SR5  
  • 2017 Toyota Tacoma TRD Off-Road  
  • 2017 Toyota Tacoma TRD Sport  
  • 2017 Toyota Tacoma TRD Pro  
  • 2016 Toyota Tacoma SR  
  • 2016 Toyota Tacoma SR5  
  • 2016 Toyota Tacoma TRD Sport  
  • 2016 Toyota Tacoma TRD Off-Road  
  • 2016 Toyota Tacoma Limited  


Lowest Price! Guaranteed!