Low Range Offroad

Low Range Offroad Wheel Bearings

From $39.90

• OEM component
• Sold individually

Low Range Offroad Spring Over Axle Kits

From $118.80

• You will need to raise your steering linkages since your relocated springs will interfere with the stock drag link
• Shocks are not included
• Will not fit 2WD models
• Complete contact HD self-aligning spring over axle pads
• Front shock tower kit and rear upper shock mount
• Front and rear lower shock mounts
• 3/4" drive shaft spacer for front axle
• 1" drive shaft spacer for rear axle
• 21" coated stainless steel braided brake lines
• U-bolt and plate kit

Low Range Offroad King Pin Bearings

From $18.00

• 12 needle bearings in the cage
• Sold Individually

Low Range Offroad Steering Stablilizer Bracket

From $41.99

• Can fit shocks up to an 1.5" wide
• For those smaller shocks, Low Range provide appropriate washers to center the stabilizer
• Available in left or right hand drive

Low Range Offroad Switch E-Locker Wiring Harness kit

From $214.80

• Factory style connections for easy installation
• Each wire is sealed at the connector just like OEM
• Fused battery wire
• Weather resistant fuse holder
• OEM gauge and color automotive cross linked wire
• OEM axle breather tube connector built into harness
• Fuse taps included to provide switch Illumination when your lights are turned on
• Ground connection through 1 screw
• Harness is 18' long to reach just about any application
• Harness is supplied with (2) 15A fuses: (1) ATO and (1) Mini fuse

Low Range Offroad Toyota Ultimate Backing Plate Eliminator

From $35.94

• Sold as a pair
• Eliminates your factory flimsy Toyota Backing plate that can attract mud and rocks
• Inadequately vent rotors
• Uses either factory or aftermarket spindle bolts/studs
• Uses OEM brake hard lines

Low Range Offroad Shock Mount Kits

From $106.80

Low Range Offroad Window Latch Hinge

From $12.59

• Solid aluminum construction
• Replacement for the brittle plastic part that breaks easily
• Pivots are sold individually
• If you need a pair you will need to order two
• Easy to install

Low Range Offroad Formed Tube Gusset

From $10.50

• Gussets are a great way of gaining a lot of strength out of your cage
• Do not have anything lasered in them for design
• If they had any kind of hole in them they would trap water which would lead to corrosion
• Laser Cut from 1/8" Steel Plate
• High accuracy CNC press bent

Low Range Offroad Tie Rod Ends

From $15.30

• Left hand versions have small notch in them to indicate they are different
• Zinc plating for corrosion resistance
• Sold individually

Low Range Offroad Winch Mount Plate

From $193.79

• Universal winch plate
• Made from .25” thick ASTM A36 steel
• Designed to mount winches with the standard 10" x 4.5" bolt pattern
• Include mounting holes for both a winch and a front fairlead

Low Range Offroad Builder Tabs

From $2.26

• These are builder tabs for people on a budget
• These are puzzled into our sheets when making other products- so we can offer them at a lower cost
• All Economy Builder Tabs are laser numbered to avoid confusion
• Priced Individually.

Low Range Offroad Door Panels

From $106.80

• Fits soft top or hardtop models
• 3003 aluminum diamond tread plate
• Includes zinc plated screws and rubber expanding rivet nuts

Low Range Offroad Leaf Spring Hanger

From $130.80

• Sold as a pair
• Made from 1/4” thick steel
• Inside diameter of 3" and a 9/16" bolt hole
• 5" overall length
• Measurement from inside up to the center of the hole is 1-5/8"

Low Range Offroad Strut Spacers

From $190.80

• Easy to install
• Made high quality polyurethane
• Some come in red finish
• Sold in pairs or kits

Low Range Offroad U-Bolt Kits

From $115.20

• Extended length kit
• Zinc plated finish
• Hardware included
• 12 month limited warranty

Low Range Offroad Door Limiter Straps

From $36.00

• Longer, 4-position adjustable
• Use one of the four sewn loops in the strap to set the desired limit
• Provides longer strap clearance

Low Range Offroad Full Twin Stick Kit

From $263.99

• Allows you to be in 2wd Low Range
• Twin stick conversion you will be able to benefit from crawling gears while leaving the front differential unlocked
• With the flip of a lever you can engage the front driveline when it is needed
• Installation requires removal of the center transfercase detent ball
• Kit bolts to the top of the transfer case in place of your original shift tower
• Clearance of floor and console modification is required

Low Range Offroad Steering Kits

From $118.80

• Works on left-hand drive (LHD) models ONLY
• Designed to work on Spring Over Axle Suspension (SPOA) setups
• Will also work on most setups over 4 inches of lift with springs and shackles
• If running over 7 inches of lift, a drop pitman arm may be needed as well

Low Range Offroad Leaf Spring Bolt Kit

From $4.80

• For aftermarket shackles and bushings
• Includes: (quantity 1) 1/2-20 x 4 grade 8 bolt, (quantity 2) 1/2-20 SAE grade 8 thru hard washers and (quantity 1) 1/2-20 grade 5 nyloc nut
• For a whole Samurai you will need 12 bolt kits

Low Range Offroad Transfer Case Gear Kits

From $478.80

• New precision cut gears
• New counter shaft
• Needle bearing
• Shims
• O-ring
• Gasket kit
• Trail-Safe input and output seals

Low Range Offroad Cup Holder Bracket

From $55.19

Low Range Offroad Steering Gear Box Bracket

From $58.80

• Brackets for those needing to mount on a steering gear box
• Helsp avoid drilling and welding on the factory frame
• Wedge and flat brackets
• Can use the factory rag joints with some brackets

Low Range Offroad Windshield Wiper Brace

From $52.80

• CNC laser cut
• Precision dimple died around holes
• 19 screw points for maximum retention and reinforcement
• One piece