Trail Gear High Steer Kits

From $506.88

• The stock steering just cant keep pace with todays super flexible suspension systems. This results in broken stock steering arms and loss of steering at critical times. Trail Gears high steer kit features super beefy, solid forged steering arms, heavy duty pitman arm, heavy duty .250in. wall steering rods, and tie rod ends. Precision fit for easy assembly.
• California Residents: WARNING

Trail Gear Disc Brake Kit

From $1,147.86

• Trail Gear' s Rear Disc Kit ha a 3/8in. thick laser cut caliper bracket with grade 10.9 mounting bolts fro a super strong mounting system. Trail Gear uses the larger GM style calipers that are shipped fully loaded and include GM style vented rotors that were custom made just for this application. The DOT approved brake lines are made so that one end fits the GM calipers and the other end attaches to your OEM Toyota brake lines, so no new fittings are required. This kit does require either a 2 lb. residual valve or the ever popular 1in. bore master cylinder that most pick ups and 4Runners have already had upgraded. Also included with this kit are full color install instructions.
• California Residents: WARNING

Trail Gear Rock Assault Ram Steering Assist Kit

From $404.91

• Trail Gears specially formed, easy to install brackets make installing their Rock Assault Steering Ram kit a breeze. If you have ever looked at other kits on the market, you will see they either dont include any mounts or they just provide generic non fitted tabs. Once your steering box has been tapped, installation of the ram takes about one hour. Each bracket is formed from heavy-duty 1/4 inch plate steel for extra strength.
• California Residents: WARNING

Trail Gear Pitman Arms

From $133.98

• Solid one piece design. Features FJ80 tapered hole. Extra strong and wide, one piece, forged design. Ideal for use with crossover steering. Flat arm, no drop. No questions asked, lifetime warranty.
• California Residents: WARNING

Trail Gear Magnum Knuckle Stud

From $27.50

• Trail-Gear Magnum knuckle studs are stronger than any other stock replacement Toyota knuckle stud on the market. These heavy-duty studs are manufactured to our specifications by world-renowned bolt manufacturer ARP (Automotive Race Products). Each stud is made from super tough, ARP 2000 material and is hardened to 220,000 PSI. Magnum studs are .250in. longer than stock to accommodate all aftermarket steering arms. Each stud features an integrated 8mm hex head for easy removal with common tools you probably already carry in your tool bag. Don?t let knuckle stud failure ruin your day, get the best, Trail-Gear Magnum knuckle studs
• California Residents: WARNING

Trail Gear Tie Rod Kit

From $221.13

• This drag link is made from .250in. wall DOM 1.25in. tubing, precision tapped, and features a left side thread mark. Each rod is test fitted to ensure that rod ends thread in with correct fit. Powder coat black finish.
• California Residents: WARNING

Trail Gear Drag Links

From $114.03

• This drag link is made from .250in. wall DOM 1.25in. tubing, precision tapped, and features a left side thread mark. Each rod is test fitted to ensure that rod ends thread in with correct fit. Powder coat black finish.
• California Residents: WARNING

Trail Gear Tie Rod

From $114.03

• This drag link is made from .250in. wall DOM 1.25in. tubing, precision tapped, and features a left side thread mark. Each rod is test fitted to ensure that rod ends thread in with correct fit. Powder coat black finish.
• California Residents: WARNING

Trail Gear Rock Assault Ram And Clevis Kits

From $538.65

• Look no further than Trail Gear for all of your hydraulic steering ram components. Whether it is a simple seal for fabricating your own custom system or a complete system Trail Gear has what you need.
• California Residents: WARNING

Trail Gear Double Ended Ram Mounting Kit

From $171.05

• This kit will take almost all the fabrication work out of mounting your Rock Assault? Double Ended Ram and Clevis Kit to almost any axle housing. The main support tube is pre-bent and can be trimmed to size and coped on the ends for a custom fit. The formed mounting plates are not welded to the tube so you can move them to the left or right to center the ram on the axle. We include a support tube, but on certain axles additional gussets may be required. Product is shipped unpainted.
• California Residents: WARNING

Trail Gear Hydraulic Hose Ram Steering

From $33.26

• Look no further than Trail Gear for all of your hydraulic steering ram components. Whether it is a simple seal for fabricating your own custom system or a complete system Trail Gear has what you need.
• California Residents: WARNING

Trail Gear Hydro Bracket Rock Assault Housing

From $793.17

• Trail Gear's hydraulic steering ram mounting brackets have a 5/8in. bolt hole and are formed out of 3/16in. Steel. All Of Trail Gear's Hydro Assist Brackets are designed to fit a factory Toyota solid axle front housing or a Trail Gear Rock Assault axle housing and a 1.25in. tie rod.
• California Residents: WARNING

Trail Gear Hydro Bracket Tie Rod

From $30.24

• Look no further than Trail Gear for all of your hydraulic steering ram components. Whether it is a simple seal for fabricating your own custom system or a complete system Trail Gear has what you need.
• California Residents: WARNING

Trail Gear Hydro Bracket Axle Housing

From $30.24

• Trail Gear's hydraulic steering ram mounting brackets have a 5/8in. bolt hole and are formed out of 3/16in. Steel. All Of Trail Gear's Hydro Assist Brackets are designed to fit a factory Toyota solid axle front housing or a Trail Gear Rock Assault axle housing and a 1.25in. tie rod.
• California Residents: WARNING

Trail Gear Power Steering Cooler

From $125.69

• If you're running a high volume/pressure pump your system is generating much more heat then the stock system. Fluid overheating can cause damage to steering pump and steering box. Installing a oil cooler in front of the radiator is the best way to prevent this over heating. Our cooler features a fin area of 9 inch X 8 inch and does a great job of keeping the steering fluid temps under control in all conditions. Mounting kit is included with the oil cooler.
• California Residents: WARNING

Trail Gear Sector Shaft Washer

From $10.50

• Replacement nut and washer for bolting on pitman arm to steering box. Fits 4wd IFS steering box from 1986-1995 Pickup and 4Runner.
• California Residents: WARNING

Trail Gear Steering Block

From $49.83

Trail Gear Knuckle Stud

From $143.22

• Factory Toyota knuckle hardware. Fits 1979-1985 Toyota front solid axle knuckle and a 1990-1997 Toyota FJ80 Landcruiser.
• California Residents: WARNING

Trail Gear Knuckle Stud Nut

From $4.74

• Factory Toyota knuckle hardware. Fits 1979-1985 Toyota front solid axle knuckle and a 1990-1997 Toyota FJ80 Landcruiser.
• California Residents: WARNING

Trail Gear Power Steering Hose Kit

From $60.48

• Look no further than Trail Gear for all of your hydraulic steering ram components. Whether it is a simple seal for fabricating your own custom system or a complete system Trail Gear has what you need.
• California Residents: WARNING

Trail Gear Power Steering V Belt Pulley

From $63.32

• This pulley is designed to fit our standard or full hydraulic power steering pumps
• California Residents: WARNING

Trail Gear Forged Dynalite Calipers

From $222.57

• Trail Gear Forged Dynalite Caliper
• California Residents: WARNING

Trail Gear Steering Shafts

From $127.89

• Universal Double-D telescoping, heat-treated steel steering shaft
• This shaft adjusts from 21" to 27"
• The shaft can also be cut down to your desired length
• California Residents: WARNING

Trail Gear ABS Tone Ring

From $23.00

• Allows for the use of the Longfield FJ80 Gun Drilled 30-Spline Super Set on your FJ80 with ABS
• Trail Gear provide high quality parts at a great price
• California Residents: WARNING