The stock steering just cant keep pace with todays super flexible suspension systems. This results in broken stock steering arms and loss of steering at critical times. Trail Gears high steer kit features super beefy, solid forged steering arms, heavy duty pitman arm, heavy duty .250in. wall steering rods, and tie rod ends. Precision fit for easy assembly.
Trail Gear's specially formed, easy to install brackets make installing their Rock Assault Steering Ram kit a breeze. If you have ever looked at other kits on the market, you will see they either don't include any mounts or they just provide generic non fitted tabs. Once your steering box has been tapped, installation of the ram takes about one hour. Each bracket is formed from heavy-duty 1/4 inch plate steel for extra strength.
This kit totally eliminates the problem of broken steering knuckles and studs. The addition of two studs in each arm effectively prevents the steering arm from becoming loose and shearing off the studs. The knuckle housing is also thicker than stock and larger gussets have been added around the outside of the knuckle for extra strength. Precision machined, each knuckle is direct bolt on, heavy duty replacement knuckle.
Trail-Gear is the originator of forged high steer arms for Toyota Pickups and 4Runners. Each arm is pressure Forged from 8620 tool steel, these arms are incredibly strong. All mounting surfaces are machined including the split washer surface and the tie rod tapered holes, ensuring correct and positive contact between parts, preventing knuckle studs and tie rod ends from coming loose. Arms are angle compensated so that the rod ends ride at the factory designed 90 degree angle.
Trail Gear' s Rear Disc Kit ha a 3/8in. thick laser cut caliper bracket with grade 10.9 mounting bolts fro a super strong mounting system. Trail Gear uses the larger GM style calipers that are shipped fully loaded and include GM style vented rotors that were custom made just for this application. The DOT approved brake lines are made so that one end fits the GM calipers and the other end attaches to your OEM Toyota brake lines, so no new fittings are required. This kit does require either a 2 lb. residual valve or the ever popular 1in. bore master cylinder that most pick ups and 4Runners have already had upgraded. Also included with this kit are full color install instructions.
Trail Gears specially formed, easy to install brackets make installing their Rock Assault Steering Ram kit a breeze. If you have ever looked at other kits on the market, you will see they either dont include any mounts or they just provide generic non fitted tabs. Once your steering box has been tapped, installation of the ram takes about one hour. Each bracket is formed from heavy-duty 1/4 inch plate steel for extra strength.
If you're installing crossover steering on your 79-85 4wd Toyota you're going to need to mount an IFS steering box. This frame mount kit includes both inner and outer frame reinforcing plates, grade 8 bolts, DOM tubing, and Crimp nuts. Inner plate is 3/16 inch, outer plate is 1/4 inch. Angled leading and trailing edges prevent frame cracking. Heavy duty design.