Steps to Change a Flat in Off-Road Terrain
So, after all the safety precautions, the inevitable happened. You got a flat. Don't stress. It happens to everyone. Here are the steps needed to get out of the woods and back on the roads.
Assess the Damage
Get out and see where the damage is. Did you pop a bead, or did a sharp object puncture your tire? If the tire lost air due to a small puncture, a tire repair kit could get out of harm's way quickly. Otherwise, it's time to change it.
Get to Flat Ground
Try finding a flat spot. It can be challenging, but it's ideal if you don't want any surprises when taking off your tire. There are other options if the flat ground isn't in the cards. Putting a rock or set of ramps behind the wheels will stop your vehicle from moving when jacked up. Lastly, make sure your vehicle is in gear.
Jack It Up
One of the most important tools to remove a tire is the jack. And since you're off-roading, a stock scissor jack isn't going to cut it. Consider adding an off-road jack to your arsenal. A jack pad completes the package, but it isn't absolutely necessary.
Take Off The Lug Nuts
The next step involves taking off the lug nuts. A 4-way cross-wrench or telescoping L wrench is something you should never leave home without it. Looking to step it up to the next level? Come prepared with a battery-powered impact gun and socket to make easy work of those hard-to-remove lug nuts.
Remove the Wheel
Once the lugs are off, the wheel should be free. But we all know they sometimes are a little hard to remove. A helping hand from a sledgehammer will complete the process. No hammer around? A swift kick might work, or the closest branch or rock will do the trick. Although the latter are rudimentary solutions, they will work.
Install the New Wheel
Out with the old and in with the new. Installing the new wheel is easy. You should always have a spare one with you when navigating challenging terrain. A tire carrier is a great alternative to keeping your spare tire safe and secure. The last thing you want is a heavy object bouncing around your trunk or back seat area.
Tighten the Lug Nuts
Place the wheel on the hub and hand-tighten all bolts. After that, lower the vehicle back down and permanently secure each bolt in a star pattern with your cross-wrench or impact gun. Ideally, every bolt should be tightened to spec, but that can be done once back on solid ground.