Need help finding parts? Question on fitment? We can help!

Give us a call 877-474-4821 or send us a message

Let's be honest: it is really hard to build a Jeep JK that stands out these days. Want to put 40-inch tires on a JK and sling one-ton axles under it? It has been done plenty of times. How about a diesel conversion? That has been done, too. What about a Hemi swap? While a great idea, they are somewhat commonplace.

Sure, you can chalk some of that up to us being jaded off-road journalists. After all, we do come across a lot of Jeep JKs in our line of work. The venerable JK has been around in roughly the same form for a decade now, which means that not only are there plenty of them on the road, but in our minds pretty much everything that could be done with a JK has already been done.

Proving us completely wrong on that jaded front is the radical Jeep JK two-door, seen here. From the outside, it looks similar to other extremely built Jeeps we have seen with 40-inch tires and swapped. Looking closer, the back-halfed frame and big coilovers teamed with bypass shocks further differentiate it from other hardcore JKs. But, what really sets this Jeep JK apart is how it is powered.

Open the hood of the Jeep JK and none of the usual propulsion suspects are found. There isn't a Hemi or a LS engine to greet you. Nor is there a Cummins diesel. In fact, there isn't an engine at all. Only a strange looking cover, the quiet whir of a couple of cooling fans, and some blinking lights that give you a clue as to just what the heck is going on under the hood.

If you haven't figured it out yet, this JK doesn't use gasoline or any form of a combustion engine. Rather it is 100% powered by electricity. Built by Poison Spyder Customs in a joint venture with South Korean firm CAD4X and Pro Comp USA, the use of electricity brings some advantages. First off, the JK has zero emissions making it a very eco-friendly wheeler. The use of an electric motor brings instantaneous torque, with a torque curve that is basically flat. Spend enough time on the trail and you quickly realize that torque is king. And tons of torque down low is even better. An electric motor delivers this in spades.

Our curiosity was definitely perked the first time we saw the JK quietly hum past us. Thankfully, we got the opportunity to check it out further. Let's dive into the details of one unique all electric Jeep JK.

Open the hood and the first thing even someone completely unfamiliar with Jeeps will spot, is the lack of an engine. In place of the standard 3.6L V6 is a Kokam/EMVCon 29 kWh battery pack. A second 29 kwh battery is found in the rear of the Jeep. The setup gives the option of running one battery down and then switching to the second battery to avoid being stranded. Going fully electric also necessitated that the brake booster be switched to an electric model and that the power steering had an electric pump. Also visible is the Optima battery and a sPOD 8 Circuit SE System that controls the electrical accessories.

Products We Used In This Article

Pro Comp 40-inch Extreme MT2
Pro Comp Vapor Pro 2 Competition Beadlock
Pro Comp 5-inch LED Motorsports Light
Optima Yellow Top Battery
Peering under the Jeep you'll easily spot the electric motor that resides where the transmission normally lays. It generates 150 kW and 200 lb-ft of torque. All of that torque is almost instantly available as the torque curve of an electric motor is basically a flat line. Just behind the motor is a 2.7:1 gearbox. It eliminates the transmission completely limiting top speed to 40 mph.

Wheeling with the electric JK is definitely a unique experience. It is eerily quiet, producing a slight whine as it stealthy moves along. A nice side effect of this is verbal communication with a spotter is extremely easy as you can almost whisper to each other. Maximum range is said to be about 70 miles before both battery packs are depleted.

Products Used in this Article

G2 CORE 44 High Pinion Front Axle
Poison Spyder BFH II Front Bumper
Poison Spyder BFH II Rear Bumper
Poison Spyder Brawler Rockers
There was no way that the stock axles would be able to handle big 40-inch tires. They were quickly ditched in favor of G2 CORE 44 axles front and rear. Both are stuffed with 5.38 gears and ARB Air Lockers for maximum traction. G2 Placer Gold chromoly axle shafts provide further strength.
Putting the power to the ground are massive 40x13.50R17 Pro Comp Xtreme MT2 tires. They are wrapped around a set of swanky 17x9-inch Pro Comp Vapor Pro 2 beadlock wheels that allow for airing down into the single digits without worrying about blowing a bead. It makes for a capable combination on the trail.

The JK sports a custom Pro Comp suspension at every corner. In the rear, the stock frame was cut off just after the door opening and disposed off. The new fabricated frame section allows clearance for the 14-inch stroke coilovers and three-tube bypass shocks. One off Pro Comp aluminum control arms and a torsion bar sway bar help to yield plenty of flex.

Holding a 40-inch spare is a Poison Spyder Body Mounted Tire Carrier. Just below it sits a Poison Spyder BFH II rear bumper. Also visible are the custom rear corners with one-off Crusher Flares. A keen eye will also notice the lack of a fuel tank (none is needed since the Jeep is fully electric) that makes plenty of room for the rear four-link suspension.
​​​​​​​
SALES
PHONE SALES (PT)
  • Monday - Friday: 6 a.m. - 5 p.m.
  • Saturday: 7 a.m. - 12 p.m.
  • Sunday: Closed
Customer Service (PT)
  • Monday - Friday: 7 a.m. - 3 p.m.
  • Saturday: Closed
  • Sunday: Closed
FOLLOW US