• Community
    • Team 4 Wheel PartsJoin the team and keep up with Greg Adler
    • FacebookAccess exclusive off-road news and giveaways
    • TwitterStay posted on 4 Wheel Parts events
    • YouTubeSee product, installation, and event videos
    • Google+Get the inside scoop on the latest off-roading trends
    • InstagramCheck out exclusive photos
    • Sign Up for Email Offers

Truck and Jeep Parts Home » Suspension » Steering Stabilizer » Rancho RS5000 Steering Stabilizer Cylinder - RS5407

Rancho RS5000 Steering Stabilizer Cylinder - RS5407

Rancho | Part Number: RANRS5407
Help us ensure this part fits your vehicle Check Fitment
Part Number: RANRS5407
  • Technical Details

    • 2 and 4-door models
    • JK models need bracket part number RANRS5510
    • Extended length is 19-3/4"
    • Collapsed length is 12"
    • Ten-stage velocity sensitive valving
    • Twin tube cellular gas design
    • Double eyelet design
    • 1-3/8" diameter piston (on most applications)
    • 5/8-in. (16 mm)

Rancho steering stabilizers are designed to improve vehicle control by reducing steering shimmy and driver fatigue. Stabilizers enable you to help protect your front-end suspension components and reduce tire wear. Stabilizer is standard eyelet style (eye holes on both ends). Shock boot has factory cut slots at the bottom and black bushings are painted white by Rancho. Extended length is 19-3/4 and collapsed length is 12. Kit includes: 1 stud, 2 washers, 2 nuts, 1 cotter pin, 1 sleeve, 1 red boot and zip tie.

FitmentSeriesSingle / DualBrackets IncludedTypeShock Boot Included
Direct FitRS5000 SeriesSingleBrackets Not IncludedStabilizer OnlyRed Shock Boot Included

Customer Reviews

Average Customer Review
3.8
 

Looks great

4.0

By Rattler

from Panama City, FL

 

Comments about RanchoRS5000 Steering Stabilizer Cylinder:

Great looks but doesn't add much to the handling.

 

Good high grade equi. better than stock

4.0

By Challenger Joe

from Ohio

 

Comments about RanchoRS5000 Steering Stabilizer Cylinder:

On the orig. equi. the tapered bolt that connects dampener to steering gear, You will need a impact hammer. This is a real bear to remove.

 

Works good so far

5.0

By SlippySlate

from Maryland

 

Comments about RanchoRS5000 Steering Stabilizer Cylinder:

This damper only has a little over 1000 miles on it since I installed it. The improvement was noticed immediately. The old damper wore out after about 25k; I didn't replace until 32k so there was a lot of wobble and noticeable bump steer. After installing this product, my 2012 lifted wrangler with 35X12 handles at road speeds like new. I am curious to see how many miles this product will continue

 

2006 Jeep Rubicon Unlimited

3.0

By Bob

from Colorado

 

Comments about RanchoRS5000 Steering Stabilizer Cylinder:

After installing a Rubicon Express 3.5 lift on my 06 Rubicon Unlimited, I felt more "loose steering" over the stock height. My lift kit did not come with a steering stabilizer (said not needed), so I ordered this as an add on. The stabilizer did tighten up the steering a tad bit, but still too loose for the wife. Now ordering a front trac-bar to correct the "bump steer" we are now experiencing.

 

helped but not great

3.0

By coote

from Canaan, NH

 

Comments about RanchoRS5000 Steering Stabilizer Cylinder:

It helped a little with steering jitter and play. Not as much as I had hoped for though. Definitely better than stock but if you have poor steering issues you might want to go with a double setup or just a higher quality one.

Back to top
 

Questions & Answers

  • Q:

    Is it in stock? Thank you
Back to top
 
  • Now Hiring

    4 Wheel Parts is Hiring

    To see all of our current job openings

    Apply Now

  • Email Offers

    Sign up now to receive our latest promotions and exclusive offers.

  • Store Locator

    4 Wheel Parts Store Locator

    91 Stores in North America.
    Locate a store near you.

    Store Locator