• Community
    • Team 4 Wheel PartsJoin the team and keep up with Greg Adler
    • FacebookAccess exclusive off-road news and giveaways
    • TwitterStay posted on 4 Wheel Parts events
    • YouTubeSee product, installation, and event videos
    • Google+Get the inside scoop on the latest off-roading trends
    • InstagramCheck out exclusive photos
    • Sign Up for Email Offers

Truck and Jeep Parts Home » Bumpers, Tire Carriers & Winch Mounts » Front Bumpers » Smittybilt XRC M.O.D. Modular Center Section with Winch Plate and D-ring Mounts (Black) - 76825

Smittybilt XRC M.O.D. Modular Center Section with Winch Plate and D-ring Mounts (Black) - 76825

Smittybilt | Part Number: S/B76825
Help us ensure this part fits your vehicle Check Fitment
Part Number: S/B76825
  • Technical Details

    • 2 and 4-door models
    • Two stage textured matte black powder coat finish
    • Built-in winch plate to accommodate up to a 15k winch
    • Manufactured from 3/16 cold rolled steel
    • Solid mount d-rings - Weld on the inside and out

The all new JK XRC M.O.D. (Multi Optional Design) Bumper System allows you to design your bumper for any terrain. The base unit was developed around our XRC platform and comes standard with a winch cradle with capacity to support up to a 15,000lb. winch. Its also equipped with D-Ring mounts that are welded on the inside and out that provides a towable anchor when pulling your rig behind a truck or motor home. Choose between our Mid or Full Width End Plate knowing that bumper clearance won't be sacrificed when wheeling in the harshest conditions. Then decide which over rider you prefer, you can choose between our low profile bull bar or our high point stinger.

Installation instructions are in PDF format. You will need Adobe Reader to view these files.
Download Instructions

FitmentWinch Mount IncludedWidthLight Mounts IncludedFinishMaterialD-Ring Mount Included
Direct FitWinch Mount IncludedStubbyLight Mounts Not IncludedPowder CoatSteelD-ring Mount Included

Customer Reviews

Average Customer Review
4.1
 

Great Looking, Well Built

4.0

By Warrior Jeep

from Rio Rancho, NM

 

Comments about SmittybiltXRC M.O.D. Modular Center Section with Winch Plate and D-ring Mounts:

This bumper is a beast, I love every inch of it. Installed on a 2015 JKURHR to replace the flimsy factory/aftermarket bumper. Installation Notes: 1) Follow the instructions with regards to installing and wiring the winch first. If not you will be removing it to do so... 2) Be prepared to "persuade" bolts to line up on your particular vehicle. Remember, they are made to fit several models. 3) L

 

Looks Great, Good price, Not so good craftsmanship

3.0

By Rusty

from Denver

 

Comments about SmittybiltXRC M.O.D. Modular Center Section with Winch Plate and D-ring Mounts:

Bumper went on pretty easy, instrctions you might as well toss away when you open the box, IF you buy this bumper (I wouldnt again) make sure you follow these guidelines or you will regret it, Install winch and the wires to winch first, then bull bar. Otherwise bolts are hard to reach but can be done with help of someone else. Then install bumper, I bought the full width end pieces, they come fro

 

Great addition!

5.0

By Jake

from Oklahoma City,

 

Comments about SmittybiltXRC M.O.D. Modular Center Section with Winch Plate and D-ring Mounts:

I just installed this on a 2012 Wrangler and it looks way better than the stock bumper. However when installing the directions were not clear on where to use washers and how much you need to drill out the holes like it says in the directions. Also the holes for the add on parts where the stainless parts go the powder coat made it rough going to screw in those bolts. I would recommend this to other

 

Nice looking bunper

5.0

By Tom

from Montpelier ID

 

Comments about SmittybiltXRC M.O.D. Modular Center Section with Winch Plate and D-ring Mounts:

This bumper is great. heavy duty with a real nice look.

 

Looks and feels great....

4.0

By Brandon

from Parker, Colorad

 

Comments about SmittybiltXRC M.O.D. Modular Center Section with Winch Plate and D-ring Mounts:

I have yet to try out the product to it's fullest but so far so good. Horrible on the installation though. Bolt holes for the main section had to be drilled out more then what was stated. I also bought the full width extensions as I love the fogs. Was told that I would be able to connect with the stock wiring...... Not even close. Cut the wires and hard wire it. Then your good. I also bought the

 

Great looking bumper

4.0

By Ryan

from Kountze, TX

 

Comments about SmittybiltXRC M.O.D. Modular Center Section with Winch Plate and D-ring Mounts:

The bumper looks great and my Warn VR8000 fit right in with room to spare. Seems to be well built. Wobble sockets and extensions made life a lot easier. The instructions are pretty vague, especially for a novice.

 

XRC Modular bumper

4.0

By jeff

from Nashveill

 

Comments about SmittybiltXRC M.O.D. Modular Center Section with Winch Plate and D-ring Mounts:

Nice design but I had to drill out some holes quite a bit to make it fit.

Back to top
 

Questions & Answers

  • Q:

    Where do you mount the stock fog lights?
Back to top
 
  • Now Hiring

    4 Wheel Parts is Hiring

    To see all of our current job openings

    Apply Now

  • Catalogs

    4 Wheel Parts Catalog

    Free Full-Color
    Jeep & Truck Catalogs.

    Request a Catalog

  • Email Offers

    Sign up now to receive our latest promotions and exclusive offers.

  • Store Locator

    4 Wheel Parts Store Locator

    91 Stores in North America.
    Locate a store near you.

    Store Locator