Designed with the off-road enthusiast in mind, Smittybilt SRC Rear Bumpers are the perfect addition to any Jeep running oversized tires. The finest materials combined with a dual stage powdercoat help make this one heavy duty piece of equipment that is built to last.
Just what they say it is , only down fall was inner frame brackets were not in box , had to fab my own .
Great price and the bumper looks real cool. Took about an hour to install and the instructions were super easy to follow.
Obviously far superior than stock and price was not too bad. I bought it for the tow hitch, anchor points, and added body protection but it also makes a nice shelf to use while loading gear in the back and a great step to stand on to access roof. I would have preferred it stuck out just a little farther to protect against the spare being driven into the tail gate with any rear end impacts but I will get a bump plate insert to remedy that. Not really a walk in the park to install due to bolting access but not too difficult overall. I would not hesitate to buy this bumper again for my next jeep.
No problems mounting the bumper, i was able to do it by myself in under an hour using a floor jack to lift the bumper into place
Very sturdy bumper at a great price - easy install
Easy install, looks great and hitch tows much nicer. Big improvement and looking at the matching front
This is a great bumper. Yes it does rattle a little bit. If you are interested in this type of thing your Jeep already has accessories on it that rattle. Its a Jeep. If you want something quiet buy a car. You are not a Jeep person. The tire carrier swing out is very stiff. That is a good thing. If it wasn't it would beat its self to death. It looks great a preforms just like it should. I only wish it came with a Smittybilt sticker. That's not a very big complaint. I recommend this bumper.
Fantastic bumper. I love the look. With that being said, here is the bad part... you have to drill 4 New holes and elongate 2 holes. You need a impact gun to pull it tight to the frame. Getting your hand behind the gas tank to start the nuts is no easy task. I used a magnet to get the washer and nut started. You also will need a spare tire reloaction bracket for 33 x 12.50 15's and bigger. I have new 33 12.50 15 goodyear dura tracs and the rear gate WILL not close without the extra bracket. The tire just rubs a little with the bracket. The bracket is about 40 bucks. still saves you about 170 v/s this bumper with the tire swing. My guess would be get the bumper with the tire swing if you are running something larger than a 33. Thanks SRC. Thanks 4WD!!
Q: Does the bumper come with the blanking plugs for the 3 x 3 light holes? Answer this question
A: Yes, it comes with the plugs in place.
Answered by GraniteMat from Md on 05/17/2021
A: Yes it doesÂ
Answered by Jon w on 05/16/2021
A: Yes it doesÂ
Answered by Hollsjeep from Illinois on 05/15/2021
Q: What is the weight? Answer this question
A: Actual weight of the rear bumper is 67lbs (vs 15lbs for the plastic stock rear bumper)
Answered by Cacciato from Ellicott City, MD on 08/24/2022
A: Unfortunately I am not seeing a specific model but I can list some results from a quick internet search. Smittybilt 76745 SRC Carbine Rear Bumper for 2007-2018 lists at 92lbs. The Smittybilt 76614 SRC Gen 2 Rear Bumper lists at 117lbs. I would suggest taking the exact model that you are looking at and search the manufacturers page. Here you will find your info along with any details that are relevant to your specific build
Answered by aparsecaway from Birmingham, AL on 07/15/2022
Q: What size are the trapezoid holes, and do they have anything to mount lights to? specifically, I'm looking at the rigid chase lights, but it doesn't look like the holes are quite big enough Answer this question
A: My bumper has two square holes with an ID of 2-3/8". The other trapezoid holes on either outside ends are 3-3/4" across top 1-3/8" across bottom and 2-1/4" top to bottom. I think these are for a high lift jack. That what I use them for. Great bumper no rust after a year.
Answered by Green Jeeper from Oregon on 03/31/2022
A: The Smittybilt SRC Carbine Rear Bumper – PN: S/B76745 | Accommodates (2) aftermarket style 3x3 cube LED lights. The trapezoid holes are access holes to mount the bumper.
Answered by Dave from 4WP HQ on 03/14/2022
Q: Will this bumper fit ok with a muffler skid plate such as the Rough Country? They both use the same 4 bolts over the receiver hitch. Answer this question
A: Not sure. Â Bolts for hitch part of bumper install from muffler side. Â
Answered by Burndog from Fl on 09/03/2022
Q: What is the max tongue weight and towing capacity for this bumper? Answer this question
A: The tongue weight is 500lb and tow weight is 5,000lbs. However, you should never tow more than your vehicle can handle.
Answered by Dave from 4WP HQ on 07/22/2022
For 60 years Smittybilt has been fabricating aftermarket parts and today their products include Jeep tops, bumpers, lighting, winches and trail gear. Off-roaders count on the company's innovative parts like the original nerf bar side steps to equip their Jeeps for the trail and day-to-day driving. Pairing affordability without compromising quality is the hallmark of Smittybilt and the manufacturer's reputation carries over to products like its Overlander Series of tents, Adventure Boxes and SEMA award-winning magnetic trail skins for Jeeps. Smittybilt offers over 2,000 interior and exterior parts and accessories for 4x4s with multiple capabilities for jeepers of all levels. Shop Smittybilt Now
Join our mailing list to receive information on new products, special events, discounts and more!
Sign up to receive deals by email!
Sign up to receive text alerts about new product releases, exclusive access to sales, and much more!
Sign up to receive deals by text!
By submitting, you agree to receive recurring autodialed marketing text msgs (e.g. cart reminders) to the mobile number used at opt-in from 4 Wheel Parts (4WP) on 21208. Consent is not a condition of purchase. Msg frequency may vary. Msg & data rates may apply. Reply HELP for help and STOP to cancel. See Terms and Conditions & Privacy Policy