Rubicon Express Parts and Accessories

  • Rubicon Express Parts and Accessories by 4 Wheel Parts

    Leaf Spring Bushings & Pads Replace your rubber bushings with a set of polyurethane Leaf Spring Bushings from Rubicon Express.

  • Rubicon Express Parts and Accessories by 4 Wheel Parts

    Control Arm Bushings Rubicon Express Control Arm Bushings are factory replacement rubber bushings used in upper and lower control arms.

  • Rubicon Express Parts and Accessories by 4 Wheel Parts

    Track Bar Bushings Rubicon Express Track Bar Bushing Kits include the necessary parts to replace your worn bushings helping to control bump steer and wheel hop.

  • Rubicon Express Parts and Accessories by 4 Wheel Parts

    Shock Absorber Bushing Upgrade or replace your worn stock rubber shock absorber bushings with a set of polyurethane shocks bushings.

  • Rubicon Express Parts and Accessories by 4 Wheel Parts

    Sway Bar Bushing Tighten up the handling of your truck with these replacement urethane sway bar bits.

  • Rubicon Express Parts and Accessories by 4 Wheel Parts

    Brake Hose Rubicon Express brake lines are as good as they get and are built to last. Features are thick stainless steel outer casing riding on a rubber casing outside a kevlar casing housing a teflon inner hose.

  • Rubicon Express Parts and Accessories by 4 Wheel Parts

    Brake Hose Clips And Brackets Rubicon Express Brake Line Relocation Brackets will give your brake lines the length they need by relocating the mount lower.

  • Rubicon Express Parts and Accessories by 4 Wheel Parts

    Complete Suspension Systems and Lift Kits Rubicon Express Jeep suspension lift kits combine performance, durability, and value to create Jeep lift kits of only the highest quality. Using the proven Long Arm Suspension, Rubicon Expresss vast array of products provide optimal off-road traction for Jeep lift kits, as well as maximum on-road handling, even at high speeds. Best of all, Rubicon Express has Jeep lift kits available for nearly every model and year of Jeep vehicle.

  • Rubicon Express Parts and Accessories by 4 Wheel Parts

    Shock Absorbers Rubicon’s Extreme-Duty, mono-tube shocks and twin-tube shocks are developed and tuned specifically for each application. This is the only way to deliver maximum control while not compromising ride quality, high-speed stability and comfort for those extended trips over the toughest terrain.

  • Rubicon Express Parts and Accessories by 4 Wheel Parts

    Shock Absorber Conversion Mount Rubicon Express Shock Extensions are a must have when running a CV driveshaft for shock body clearance on your vehicle.

  • Rubicon Express Parts and Accessories by 4 Wheel Parts

    Shock Absorber Relocation Bracket Rubicon Express Shock Conversions allow you an assortment of shock options by converting the factory mounts.

  • Rubicon Express Parts and Accessories by 4 Wheel Parts

    Leaf Spring Rubicon Express Leaf Springs have been proven by many years of hard use and will provide a comfortable ride.

  • Rubicon Express Parts and Accessories by 4 Wheel Parts

    Leaf Spring Shackle Kit Rubicon Express Shackles are a must for maximizing wheel travel on aftermarket spring packs.

  • Rubicon Express Parts and Accessories by 4 Wheel Parts

    Bump Stops Rubicon Express Extended Bumpstops provide extra limitation for larger tires.

  • Rubicon Express Parts and Accessories by 4 Wheel Parts

    Axle U-Bolt Kit Rubicon Express U-Bolt Kits are clear zinc plated and include nuts and washers.

  • Rubicon Express Parts and Accessories by 4 Wheel Parts

    Track Bar Rubicon Express Adjustable Track Bars reduce bump steer and are designed to center the axle assembly under the vehicle after installation of a lift kit.

  • Rubicon Express Parts and Accessories by 4 Wheel Parts

    Sway Bar Link - Disconnect Rubicon Express Sway Bar End Links are a non disconnect style end link design for vehicles that spend the majority of the time on the road.

  • Rubicon Express Parts and Accessories by 4 Wheel Parts

    Leaf Spring Axle Shim Rubicon Express Leaf Spring Shims

  • Rubicon Express Parts and Accessories by 4 Wheel Parts

    Leaf Spring Plate These Spring Plates From Rubicon Express will allow you to attach leaf springs to custom axles, or to upgrade your stock application.

  • Rubicon Express Parts and Accessories by 4 Wheel Parts

    Control Arms Take Control of your vehicles suspension with new Control Arms from Rubicon Express.

  • Rubicon Express Parts and Accessories by 4 Wheel Parts

    Coil Springs Rubicon Express Coil Springs are designed to provide the best in ride quality without sacrificing durability and load capacity.

  • Rubicon Express Parts and Accessories by 4 Wheel Parts

    Transfer Case Lowering Kit Rubicon Express Transfer Case Lowering Kits lower the transmission crossmember to help reduce driveline angle and vibration on vehicles not using a CV driveshaft.

  • Rubicon Express Parts and Accessories by 4 Wheel Parts

    Track Bar Bracket Rubicon Express Track Bar Brackets allow for proper axle alignment on lifted vehicles.

  • Rubicon Express Parts and Accessories by 4 Wheel Parts

    Suspension Block and U-Bolt Kit Rubicon Express Block and U-Bolt Kits are an easy way to add height to a vehicle without increasing spring rates.

  • Rubicon Express Parts and Accessories by 4 Wheel Parts

    Suspension Block Rubicon Express Lift Blocks are an easy way to add height to a vehicle without increasing spring rates.

  • Rubicon Express Parts and Accessories by 4 Wheel Parts

    Alignment Caster/Camber Kit Rubicon Express Degree Cam Bolt Kits allow for adjustment of pinion angle for proper driveline alignment.

  • Rubicon Express Parts and Accessories by 4 Wheel Parts

    Leaf Spring Center Pin Rubicon Express Replacement Center Pins are needed when installing add-a-leafs or block kits.

  • Rubicon Express Parts and Accessories by 4 Wheel Parts

    Sway Bar Bracket Rubicon Express Sway Bar Brackets are designed to move your sway bar forward and down to increase spring clearance.

  • Rubicon Express Parts and Accessories by 4 Wheel Parts

    Leaf Spring Alignment Clamp Rubicon Express Spring Clamp Clips are often used after installing full lenth add-a-leafs or to replace broken or missing factory clips.

  • Rubicon Express Parts and Accessories by 4 Wheel Parts

    Frame Crossmember The Extreme-Duty Crossmembers from Rubicon Express are the heart of the long arm conversion. This is the new mounting point for all of the control arms, as well as the transmission and transfer case. The brackets are designed to strengthen the frame, while the convenient drop out center section allows for easy transfer case and transmission service without having to remove suspensioncomponents.

  • Rubicon Express Parts and Accessories by 4 Wheel Parts

    Control Arm Drop Bracket Rubicon Express Control Arm Drop Brackets are used to relocate the upper and lower control arms approximately 3" lower and 1/2" forward of their factory position. The reduction in control arm angle improves the lifted ride and handling substantially.

  • Rubicon Express Parts and Accessories by 4 Wheel Parts

    Axle Truss Bolt-On Already have a Rubicon Express long arm system and want to change your suspension in the rear to a true 3-link? Here is what you have been looking for. Triangulate the rear of your TJ and eliminate the rear track bar that can cause lateral axle movement. The kit features HD SF1 pivot ball assembly, attached with 5/8" grade 8 hardware providing superior strength and up to 32 degrees of misalignment. **Exhaust modifications required.

  • Rubicon Express Parts and Accessories by 4 Wheel Parts

    Coil Spring Mounting Kit Correct rear coil spring and track bar location woes after lifting your Jeep with a set of coil spring relocators from Rubicon Express

  • Rubicon Express Parts and Accessories by 4 Wheel Parts

    Brake Line Relocation Bracket Brake Line Relocation Bracket

  • Rubicon Express Parts and Accessories by 4 Wheel Parts

    Bump Stop Spacer Rubicon Express Bump Stop Spacers increase the length of your bump stops, limiting the suspension travel after lifting a vehicle.

  • Rubicon Express Parts and Accessories by 4 Wheel Parts

    Long Arm Upgrade These Rubicon Express Long Arm Upgrade Kits for the Cherokee XJ and Grand Cherokee ZJ include cross members and Extreme-Duty control arms and will allow for an easy upgrade to a Long arm suspension. The Extreme-Duty™ long arm suspension system will provide noticeable improvements in your Cherokee's road handling. Off road, you will see unmatched performance on the most extreme trails.

  • Rubicon Express Parts and Accessories by 4 Wheel Parts

    Sway Bar Parts Sway bar parts end, links and pins

  • Rubicon Express Parts and Accessories by 4 Wheel Parts

    Winch Fairlead Rubicon Express Winch Fairleads are designed for synthetic winch ropes. The design is low-profile, lightweight, and as strong as they get.

  • Rubicon Express Parts and Accessories by 4 Wheel Parts

    Differential Switches And Shifters Stop melting or breaking regular plastic lines. This line kit comes with everything you need to connect to the original ARB fittings. Easy install. Do it right the first time and save yourself the hassle of unwanted trail repairs.

  • Rubicon Express Parts and Accessories by 4 Wheel Parts

    Coil Spring Spacer Rubicon Express Coil Spring Spacers are a great way to add a little extra lift to any coil spring.

  • Rubicon Express Parts and Accessories by 4 Wheel Parts

    Pitman Arm Rubicon Express Pitman Arms help reduce steering linkage angles on lifted vehicles.

  • Rubicon Express Parts and Accessories by 4 Wheel Parts

    Tie Rod End Replace your weak factory tie rod ends with these Rubicon Express Tie Rod Ends.

  • Rubicon Express Parts and Accessories by 4 Wheel Parts

    Tie Rod End Boot Rubicon Express Tie Rod End Boots keep the contaminants out of your tie rods and extend their life.

  • Rubicon Express Parts and Accessories by 4 Wheel Parts

    Steering Upgrades and Drag Links Replace your old factory draglink with this chromoly Draglink from Rubicon Express. Comes complete with new rod ends. Stronger then your factory and more complete then most factory replacements.

  • Rubicon Express Parts and Accessories by 4 Wheel Parts

    Tie Rod Replace your old factory tie rod with this chromoly Tie Rod from Rubicon Express. Comes complete with new rod ends. Stronger then your factory and more complete then most factory replacements.

  • Rubicon Express Parts and Accessories by 4 Wheel Parts

    Transmission Mount Rubicon Express Transmission Mounts replace the factory rubber mounts with high quality polyurethane.

  • Rubicon Express Parts and Accessories by 4 Wheel Parts

    Steering Stabilizer Rubicon Express Steering Stabilizers dampen steering shake and shimmy found on 2wd and 4wd vehicles during adverse conditions.

  • Rubicon Express Parts and Accessories by 4 Wheel Parts

    Transfer Case Slip Yoke Eliminator Kits and Hardware Rubicon Express Slip Yoke Eliminators will ensure smooth and durable driveline operation, by converting to a fixed yoke output. This design is conducive to off road use and the steeper operating angles caused by suspension lifts.

  • Rubicon Express Parts and Accessories by 4 Wheel Parts

    Drive Shaft Universal Joint This U-joint from Rubicon Express is used to fit 1310 series driveshaft to factory 1330 series pinion yoke.

  • Rubicon Express Parts and Accessories by 4 Wheel Parts

    Drive Shafts Designed for the trail is the best way to describe these drive shafts from Rubicon Express. These shafts are built for your application using only top shelf parts and can take the abuse of the toughest trail yet still have street manners.

  • Rubicon Express Parts and Accessories by 4 Wheel Parts

    Transfer Case Yoke These yokes are specially machined to adapt a standard style U-Joint to your stock transfer case. This allows the use of a rear spicer style 1310 CV-joint driveshaft.

  • Rubicon Express Parts and Accessories by 4 Wheel Parts

    Brackets, Gussets & Tabs Rubicon Express Axle & Chassis Brackets

  • Rubicon Express Parts and Accessories by 4 Wheel Parts

    Axle Bracket Kits Rubicon Express Builder Parts are designed for Do-It-Yourself Projects and custom applications.

  • Rubicon Express Parts and Accessories by 4 Wheel Parts

    Leaf Spring Accessories Rubicon Express Leaf Spring Perches have unique features like 1/4" steel construction, 6" contact area with spring, and multiple center pin holes for easy wheelbase adjustments.

  • Rubicon Express Parts and Accessories by 4 Wheel Parts

    Shock Mounts Use these custom Rubicon Express Shock Mounts when fabricating your off-road vehicle suspension

  • Rubicon Express Parts and Accessories by 4 Wheel Parts

    Leaf Spring Perch Rubicon Express Leaf Spring Accessories

  • Rubicon Express Parts and Accessories by 4 Wheel Parts

    Control Arm Mount Rubicon Express Control Arm Brackets are laser cut from 3/16" cold rolled steel and then CNC formed for unmatched precision and strength. These brackets are required for cleanly mounting a custom axle in your vehicle.

  • Rubicon Express Parts and Accessories by 4 Wheel Parts

    Flex Joints The Rubicon Express Super-Flex cartridge was originally designed to replace the heim joints used in their early suspension designs. This cartridge uses UHMW side races and a unique threaded adjuster nut which allows easy tightening and rebuilding if necessary.

  • Rubicon Express Parts and Accessories by 4 Wheel Parts

    Rod Ends, Heim, Johnny & NG Joints We carry the Rod Ends you're looking for right here. Whether it's Heim Joints, Johnny Joints, or Next Generation Rod Ends, Vehicle specific replacements or Universal applications for fabricating. Greasable, Rebuildable, Forged, Welded, 2 inch, 2-1/2 inch, 3 inch, Weld-in or thread-in. We have a variety of Rod Ends to cover your specific needs.

  • Rubicon Express Parts and Accessories by 4 Wheel Parts

    Heim Joints Rubicon Express Rod Ends

  • Rubicon Express Parts and Accessories by 4 Wheel Parts

    Jam Nuts Rubicon Express Jam Nuts are zinc plated for corrosion resistance.

  • Rubicon Express Parts and Accessories by 4 Wheel Parts

    Misalignment Spacers & Washers CNC machined and Zinc plated for corrosion resistance, these Hi-Misalignment spacers from Rubicon Express will allow for greater operating angle from your heim joints.

  • Rubicon Express Parts and Accessories by 4 Wheel Parts

    Motor Mount The Rubicon Express Motor Mount Lift will correct your driveline angles or improve your engine clearance for skid plates.

  • Now Hiring

    4 Wheel Parts is Hiring

    To see all of our current job openings

    Apply Now

  • Catalogs

    4 Wheel Parts Catalog

    Free Full-Color
    Jeep & Truck Catalogs.

    Request a Catalog

  • Email Offers

    Sign up now to receive our latest promotions and exclusive offers.

  • Store Locator

    4 Wheel Parts Store Locator

    66 Stores in North America.
    Locate a store near you.

    Store Locator