Synergy Manufacturing TRE Adapter

From $40.00

• Adapter is designed to flip the taper on the steering knuckle
• CNC machined from 303 stainless steel
• Sold Individually
• Made in the USA
• California Residents: WARNING

Vision X Lighting Mini Solo Xtreme LED Pod

From $179.99

• The Mini Solo uses a single 5-watt LED to achieve the the hightest light output for the housing. The Mini Solo is 493 lumens of light in a 1.69 inch x 1.69 inch package for tons of light mountable in the smallest spaces.
• California Residents: WARNING

Synergy Manufacturing Bushings

From $30.00

• Bushing halves
• Bushing Kits
• Bushing Sleeves
• California Residents: WARNING

Synergy Manufacturing Front Track Bars

From $225.00

• Bent to clear most aftermarket differential covers
• Retains factory track bar mounting bolts and hardware
• Made from high quality 1-1/4 inch 1018 CR Solid Round Barstock
• Allows centering of front axle when running a suspension lift
• Features an abrasive resistant Powdercoat finish for maximum durability and corrosion resistance
• Made in the U.S.A
• California Residents: WARNING

Vision X Lighting Slow Flash Resistor for LED Bulbs

From $13.99

• Universal application
• Aluminum housing
• California Residents: WARNING

Vision X Lighting LED Pods

From $23.99

• Universal led pod features a billet mounting base and 15 hi output 5mm LED's which put out over 1 watt of LED light. Weather resistant pod is a direct 12 volt hook up.
• California Residents: WARNING

Vision X Lighting LED Replacement Bulbs

From $11.99

• The 360 series LED bulbs consist of 5mm LED's that use the factory housing the same way a standard halogen bulb would, with a typical LED bulb having 28 of these LEDs. The benefit with LED is ten time less power consumption and instant on. Bulbs are designed to fit turn signals, brake lights, reverse indicators, dome lights, and any other standard light receptacle, with the exception of the headlights. Due to the increased efficiency of LED bulbs over halogen bulbs, your vehicle may have faster blinking that factory, because the vehicle doesn't get the halogen amperage draw. To resolve this, Vision X has introduced the HIL-Resistor which is sold separately, which increases the resistance and eliminates any fast blinking or bulb out indicators.
• California Residents: WARNING

Vision X Tube Lighting Mounts

From $32.99

• The Vision X OE Kits are designed with the customer in mind with easy direct to factor fitting kits that take little to no modifaction to install.
• California Residents: WARNING

Synergy Manufacturing Control Arm Bushing Outer Sleeve

From $30.00

• Control Arm Bushing Outer Sleeve
• Universal application
• Made of high strength steel
• Welding required
• Made in the USA
• California Residents: WARNING

Synergy Manufacturing Cam Bolt Eliminator Kits

From $110.00

• Designed To Take Place Of Cam Bolts Used On Stock Control Arm Mounts
• Desirable For Users Who Are Removing Cam Bolts And Upgrading To Adjustable Control Arms
• Laser Cut 3/16" High Strength Steel
• Zinc Plated For Maximum Corrosion Resistance
• Includes 4 Washers
• California Residents: WARNING

Vision X Lighting LED Replacement Dome Light

From $6.99

• Universal application
• Super bright
• 200,000 hour life
• California Residents: WARNING

Vision X Lighting Prime Dimmer Switch

From $54.99

• The Vision X 3? square XIL-PDIMMER features plug and play dimming of all prime drive lights, and black housing. The XIL-PDIMMER comes with a standard warranty, multi-volt 9-40V DC input, and weighs 1 pound. Giving you the ability to dim your lights for controlled use and also the option of controlling multiple lights off of a single dimmer. Dimensions: 9? x 2.25? x 1.5?
• California Residents: WARNING

Synergy Manufacturing Dodge AAM 9-1/4 Inch Lower C-Gusset Kit

From $35.00

• Laser cut and CNC formed from high strength 3/16 inch steel
• Make in the USA
• California Residents: WARNING

Synergy Manufacturing Bracket Kit

From $200.00

• Easy installation
• 2.0 inch reservoir mounts sold separately
• Extended bracket measures 17 inch from bottom of bracket to center of bolt hole
• Made in the USA
• California Residents: WARNING

Vision X Lighting Solstice Prime

From $129.99

• The new Solstice Prime LED Light Bar's powerful design and Prime Drive Technology make the Solstice Prime everything you need and more. And with a 50,000 hour lifespan, PWM Dimmability, and Electronic Thermal Management all with extremely low amp draw, the Solstice Prime from Vision X is the most advanced LED light bars on the market.
• California Residents: WARNING

Vision X Lighting Factory Fog Light Upgrade

From $333.99

• Factory Fog Light Upgrade
• California Residents: WARNING

Synergy Manufacturing Heavy-Duty Replacement Transmission Cross Member

From $315.00

• 3.6L and 3.8L gas engines with either automatic or manual transmissions
• Laser cut and CNC formed from 3/16 inch crush resistant Grade 50 A-572 steel plate
• Fully boxed construction with internal gusseting provides maximum strength where it counts
• Compatible with stock and most aftermarket skid plates
• Made in the U.S.A
• California Residents: WARNING

Synergy Manufacturing HD E-Coated U-Bolt for 3.50 Inch Axle Tubes

From $25.00

• Axle U-Bolt Kit
• California Residents: WARNING

Synergy Suspension Joints and Rod Ends

From $60.00

• Synergy Manufacturing products & systems have been designed by real engineers with 10+ years of suspension design & experience in the off road industry. All Synergy products are designed with the use of the latest CAD engineering software to ensure the highest level of fit, finish, and performance.
• California Residents: WARNING

Synergy Ball Joint Dust Boots

From $10.00

• Synergy Manufacturing products & systems have been designed by real engineers with 10+ years of suspension design & experience in the off road industry. All Synergy products are designed with the use of the latest CAD engineering software to ensure the highest level of fit, finish, and performance.
• California Residents: WARNING

Synergy Manufacturing Steering Stabilizer Clamps

From $25.00

Synergy Manufacturing Wheel Spacer Studs

From $5.00

• Designed specifically to fit Synergy Wheel Spacers
• Sold individually

Vision X Lighting XPL Series Light Bars

From $203.99

• Produces up to 19,260 lumens
• Over 2,000 ft of usable light
• Comes with mounting feet
• Option to add wiring harness

Vision X Receiver Hitch Light Mounts

From $88.99

• Universal 2 bolt mount for class 1 or 2 hitches
• Designed to hold one or two solo pods
• Attaches to standard receiver hitches
• 20 Watts
• Machined 6061 aluminum
• Lights are sold separately