Synergy Manufacturing Ball Joints

From $250.00

Synergy Manufacturing Jeep Tie Rod Clamps

From $75.00

• CNC machined from 1020 DOM material
• 100% bolt on
• Zinc plated for corrosion resistance
• Made in the U.S.A
• California Residents: WARNING

Synergy Manufacturing Suspension Systems

From $1,070.00

• Synergy Manufacturing products & systems have been designed by real engineers with 10+ years of suspension design & experience in the off road industry.
• All Synergy products are designed with the use of the latest CAD engineering software to ensure the highest level of fit, finish, and performance.
• California Residents: WARNING

Synergy Manufacturing Front Track Bar Relocation Bracket

From $220.00

• This bracket raises the vehicle's axle side track bar mount
• Heavy-duty
• Special bolt-on design strengthens the factory mount that is prone to failure
• Laser cut from 3/16" steel & 2 stage powdercoat finish for maximum strength and durability
• Suspension components feature an abrasive resistant powder coat finish for maximum durability and corrosion resistance
• California Residents: WARNING

Synergy Manufacturing Heavy Duty Weld-On Front Track Bar Brackets

From $175.00

• Weld on design for strength and reliability
• Bracket raises the vehicles suspension roll center
• Bracket moves track bar closer to the axle centerline to clear aftermarket highsteer knuckles/tie rod at full steering lock
• Raising the roll center reduces vehicle body roll and dramatically improves overall handling
• Weld on tab included for mounting factory or aftermarket steering stabilizer up and out of harms way
• Laser cut from 3/16" steel
• California Residents: WARNING

Synergy Manufacturing Shock Mounts

From $100.00

• Synergy Manufacturing products & systems have been designed by real engineers with 10+ years of suspension design & experience in the off road industry. All Synergy products are designed with the use of the latest CAD engineering software to ensure the highest level of fit, finish, and performance.
• California Residents: WARNING

Synergy Manufacturing Adjustable Front Lower Control Arms

From $500.00

Synergy Manufacturing Jeep JK Stabilizer Relocation Kit

From $60.00

• Designed to relocate a Fox/Synergy Suspension steering stabilizer up and out of harms way on a JK
• Includes grade 8 hardware
• Manufactured from high strength 3/16 inch steel
• Powdercoated for corrosion resistance
• Factory clamp cannot be flipped, it will interfere with the diff cover
• Made in the U.S.A
• California Residents: WARNING

Synergy Manufacturing Front Upper Control Arms

From $320.00

Synergy Manufacturing Front Long Arm Upper Control Arms

From $490.00

Synergy Manufacturing Front Long Arm Lower Control Arm

From $575.00

Synergy Manufacturing Heavy Duty Fixed Rear Lower Control Arms

From $315.00

Synergy Manufacturing High Clearance Rear Long Arm Lower Control Arms

From $530.00

Synergy Manufacturing Rear Coil Wedges

From $30.00

• Polyurethane Rear Coil Wedges
• Keeps rear springs from bowing irregularly when suspension lifts are used
• Fixes the common problem of the rear springs rubbing the rear trackbar/trackbar bracket when aftermarket CV driveshafts are used
• Corrects the rear axle mount spring perch angle when aftermarket CV driveshafts are used
• Sold As A Pair
• Made in the U.S.A
• California Residents: WARNING

Synergy Manufacturing Suspension Hardware Kit

From $125.00

• Includes hardened extra thick washers that will not deform or contort like standard washers
• Made in the USA
• California Residents: WARNING

Synergy Manufacturing Front Sway Bar Links

From $115.00

• Sway Bar Links
• Front
• 100% bolt on components
• Made from 11/16" solid 1018 steel and are clear zinc plated for maximum corrosion resistance
• Will Sold as a pair
• Made in the USA
• California Residents: WARNING

Synergy Manufacturing Weld-On Rear Track Bar Brackets

From $100.00

• Weld-On rear track-bar bracket designed to replace the weak factory track bar bracket
• Replace the thin factory brackets on a stock axle or use for swapping any axle
• Multiple Track-bar holes for suspension adjustments
• This bracket requires the use of a minimum 3" rear bump stop spacer for clearance with the exhaust
• California Residents: WARNING

Synergy Manufacturing FOX/Synergy Steering Stabilizer Relocation Kit

From $300.00

• Manufactured from high strength 3/16 inch steel
• Grade 8 Hardware
• Powdercoated for corrosion resistance
• Bolt on components
• Fits Right Hand Drive Only
• Made in the U.S.A
• California Residents: WARNING

Synergy Lift Coil Springs

From $260.00

• Lift coil springs
• Synergy coils offer excellent off road performance while preserving ride quality
• Progressively wound
• keeps spring from coming unbound at suspension droop
• Progressively wound spring eliminates annoying spring clanking found on most suspension kits
• Feature frequency balanced and tuned spring rates to maximize suspension performance on and off road
• Suspension components feature an abrasive-resistant black powder coat finish for maximum durability and corrosion resistance
• Springs are designed to give the advertised amount of lift with use of aftermarket front bumpers & winches
• Sold in a pair
• California Residents: WARNING

Synergy Manufacturing Axle Trusses

From $200.00

• Open top for easy upper link installation
• Rigid, boxed design made from 3/16" laser cut steel plate
• Designed to be used for 4 link suspensions
• Fits most differentials, D35, 44, 60, Ford 8.8", 9.0" & Chevy 14 bolt housings
• Link mount brackets are angled at 50 degrees apart from each other
• California Residents: WARNING

Synergy Manufacturing Control Arm Cam Bolt Kit

From $45.00

• Synergy 9/16" Control Arm Cam Bolt Kit
• Cam bolts are manufactured from high carbon heat treated steel
• All included components are zinc plated for maximum corrosion resistance
• 100% bolt on components assures an easy, trouble free installation with the use of basic hand tools
• Cam bolt offers 1/2" adjustment in either direction
• The bolt will work on a mounting width of 2.25 - 3"
• California Residents: WARNING

Synergy Manufacturing Rear Track Bar Brackets

From $100.00

• Bracket raises the vehicle's axle side track bar mount
• The vehicle's rollcenter is raised, reducing body roll and dramatically improving overall handling
• Special bolt on design strengthens the factory mount that is prone to failure
• Laser cut from 3/16" steel & 2 stage powdercoat finish for maximum strength and durability
• Suspension components feature an abrasive resistant powder coat finish for maximum durability and corrosion resistance
• California Residents: WARNING

Synergy Manufacturing Lower Shock Mount Bracket

From $125.00

• Powdercoat finish for maximum corrosion resistance
• Laser cut 3/16 inch steel and CNC bent for superior strength durability
• Flush mount Grade 8 hardware
• Made in the USA
• California Residents: WARNING

Synergy Manufacturing Front Lower Shock Extension Brackets

From $115.00

• Manufactured from laser cut 3/16 inch steel and CNC bent for superior durability
• Moves lower shock mounts up so that the factory units can be used for lifts up to 3 inch
• Moves the factory mount hole up 2 inch
• Features an abrasive resistant Powdercoat finish
• 100% bolt on components
• Sold As A Pair
• Made in the U.S.A
• California Residents: WARNING