Rubicon Express Super Flex Rod End Balls

From $22.99

• Maintain or replace broken control arm components with genuine Rubicon Express Replacement Parts
• California Residents: WARNING

Synergy Manufacturing Radius Axle Link Brackets

From $1,000.00

• Synergy Manufacturing Radius Axle Link Brackets are designed to be used on an axle housing with a 3" diameter
• The link brackets are laser cut and CNC bent from 1/4" carbon steel
• The heavy duty 3 sided construction provides for a VERY rigid bracket and is designed to be used with any of our large rod ends with our high misalignment spacers & all of our rebuildable spherical bearing assemblies
• California Residents: WARNING

Synergy Manufacturing Front Long Arm Lower Control Arm

From $575.00

Synergy Manufacturing Rear Stretch Bracket Kit

From $1,480.00

• Synergy Manufacturing Rear Stretch Bracket Kit allows 2 Door JK's to be stretched with the Synergy 8 inch stretch kit while retaining the factory style coil spring and shock setup
• The Rear Stretch Bracket Kit Relocates upper coil spring mounts and upper shock mounts back 8 inches
• The Synergy Manufacturing Rear Stretch Bracket Kit is designed to be used in conjunction with Synergy 8032 rear 8 inch stretch brackets and long arms
• California Residents: WARNING

Synergy Lift Coil Springs

From $260.00

• Lift coil springs
• Synergy coils offer excellent off road performance while preserving ride quality
• Progressively wound
• keeps spring from coming unbound at suspension droop
• Progressively wound spring eliminates annoying spring clanking found on most suspension kits
• Feature frequency balanced and tuned spring rates to maximize suspension performance on and off road
• Suspension components feature an abrasive-resistant black powder coat finish for maximum durability and corrosion resistance
• Springs are designed to give the advertised amount of lift with use of aftermarket front bumpers & winches
• Sold in a pair
• California Residents: WARNING

Synergy Manufacturing Axle Trusses

From $200.00

• Open top for easy upper link installation
• Rigid, boxed design made from 3/16" laser cut steel plate
• Designed to be used for 4 link suspensions
• Fits most differentials, D35, 44, 60, Ford 8.8", 9.0" & Chevy 14 bolt housings
• Link mount brackets are angled at 50 degrees apart from each other
• California Residents: WARNING

Synergy Manufacturing Control Arm Cam Bolt Kit

From $45.00

• Synergy 9/16" Control Arm Cam Bolt Kit
• Cam bolts are manufactured from high carbon heat treated steel
• All included components are zinc plated for maximum corrosion resistance
• 100% bolt on components assures an easy, trouble free installation with the use of basic hand tools
• Cam bolt offers 1/2" adjustment in either direction
• The bolt will work on a mounting width of 2.25 - 3"
• California Residents: WARNING

Synergy Manufacturing Side Plate Mounting Kit (Arms Only)

From $75.00

• (2) Side Plate Mounting Arms only
• Jeep JK, 4 Door
• Made in the USA
• California Residents: WARNING

Synergy Manufacturing Rear Track Bar Brackets

From $100.00

• Bracket raises the vehicle's axle side track bar mount
• The vehicle's rollcenter is raised, reducing body roll and dramatically improving overall handling
• Special bolt on design strengthens the factory mount that is prone to failure
• Laser cut from 3/16" steel & 2 stage powdercoat finish for maximum strength and durability
• Suspension components feature an abrasive resistant powder coat finish for maximum durability and corrosion resistance
• California Residents: WARNING

Synergy Manufacturing Axle Bracket Kit

From $175.00

• Front and Rear applications
• Various mounts included
• Made in the USA
• California Residents: WARNING

Rubicon Express Transmission Mount Bracket

From $26.34

• Transmission Mount Bracket
• Installation Hardware
• California Residents: WARNING

Rubicon Express Gas Tank Skid Plates

From $109.99

• Rubicon Express has everything you need to protect the vulnerable undercarriage of your Jeep Wrangler from front to back, with skid plates for your engine oil pan, transfer case, and fuel tank. All of the skidplates are CNC laser cut from 3/16-inch steel to withstand even the worst abuse, and are designed to mount up tight to the drivetrain to maximize ground clearance. The modular protection system allows you to add skidplates as your needs and budget allow without any concerns about compatibility.
• California Residents: WARNING

Synergy Manufacturing Dodge Front Lower Control Arm

From $550.00

Synergy Manufacturing 2 Inch Front Bump Stop Spacer Kits

From $85.00

• Synergy Jeep JK, TJ, XJ, ZJ Front Bump Stop Spacer Kit
• Manufactured from high grade 6061 Billet Aluminum material
• Hard anodized finish eliminates oxidation that can occur under extreme elements
• Bump Stops fit inside front coils and provide 2", 3", and 4" of extra limitation for larger tires
• 100% bolt on components assures an easy, trouble free installation with the use of basic hand tools
• California Residents: WARNING

Synergy Manufacturing TRE Adapter

From $40.00

• Adapter is designed to flip the taper on the steering knuckle
• CNC machined from 303 stainless steel
• Sold Individually
• Made in the USA
• California Residents: WARNING

Synergy Manufacturing Bushings

From $30.00

• Bushing halves
• Bushing Kits
• Bushing Sleeves
• California Residents: WARNING

Synergy Manufacturing Front Track Bars

From $225.00

• Bent to clear most aftermarket differential covers
• Retains factory track bar mounting bolts and hardware
• Made from high quality 1-1/4 inch 1018 CR Solid Round Barstock
• Allows centering of front axle when running a suspension lift
• Features an abrasive resistant Powdercoat finish for maximum durability and corrosion resistance
• Made in the U.S.A
• California Residents: WARNING

Rubicon Express Jam Nut

From $1.35

• Universal design
• 3/4 inch diameter
• 16 threads per inch
• Left and Right hand thread
• California Residents: WARNING

Synergy Touch-Up Paint

From $25.00

• Black or Silver
• Color match to Synergy branded products
• Fast Dry
• California Residents: WARNING

Synergy Manufacturing Control Arm Bushing Outer Sleeve

From $30.00

• Control Arm Bushing Outer Sleeve
• Universal application
• Made of high strength steel
• Welding required
• Made in the USA
• California Residents: WARNING

Synergy Manufacturing Cam Bolt Eliminator Kits

From $110.00

• Designed To Take Place Of Cam Bolts Used On Stock Control Arm Mounts
• Desirable For Users Who Are Removing Cam Bolts And Upgrading To Adjustable Control Arms
• Laser Cut 3/16" High Strength Steel
• Zinc Plated For Maximum Corrosion Resistance
• Includes 4 Washers
• California Residents: WARNING

Synergy Manufacturing Dodge AAM 9-1/4 Inch Lower C-Gusset Kit

From $35.00

• Laser cut and CNC formed from high strength 3/16 inch steel
• Make in the USA
• California Residents: WARNING

Synergy Manufacturing Bracket Kit

From $200.00

• Easy installation
• 2.0 inch reservoir mounts sold separately
• Extended bracket measures 17 inch from bottom of bracket to center of bolt hole
• Made in the USA
• California Residents: WARNING

Synergy Manufacturing Heavy-Duty Replacement Transmission Cross Member

From $315.00

• 3.6L and 3.8L gas engines with either automatic or manual transmissions
• Laser cut and CNC formed from 3/16 inch crush resistant Grade 50 A-572 steel plate
• Fully boxed construction with internal gusseting provides maximum strength where it counts
• Compatible with stock and most aftermarket skid plates
• Made in the U.S.A
• California Residents: WARNING