Synergy Manufacturing Axle Housing Inner Sleeve Kit

From $150.00

• Designed to increase the strength of the front Axle housing which is prone to bending when larger off road tires are installed and used off road
• Inner Axle Sleeves add a 57% increase in strength over stock
• The stock axle housing must be drilled and plug welded for installation
• California Residents: WARNING

Synergy Manufacturing Steering Correction Kit

From $425.00

Rigid Industries LED Flashers

From $192.99

• Rigid's LED Flashers have 7 modes
• 3 Amps
• 12V DC

Rigid Industries Ignite Series Lights

From $171.19

• Flood, spot or diffused light beam pattern
• Flush or surface mount
• Measuring approximately 1.4” x 1.4” x 2”
• 1000 raw lumens
• Rigid’s smallest forward projecting light
• Small package, big output
• Low minimum voltage: 6-28 VDC
• IP68 compliant
• Rigid quality & performance
• Easy to install
• Smallest flush mount light Rigid offers
• California Residents: WARNING

Synergy Manufacturing Skid Plates

From $1,335.00

• Jeep skid plates manufactured from 3/16" crush resistant Grade A-572 Steel plate
• Flush mounted hardware provides a 100% smooth skid surface
• Premium powdercoat finish for maximum corrosion resistance
• Allows access to drain plug without removal
• Made in the USA
• California Residents: WARNING

Rigid Industries LED Scene Lights

From $124.99

• Scene
• LED Light
• 4x4
• Bolt Down Pole Mount Surface
• 115 Deg.
• Black
• DC Power
• California Residents: WARNING

Synergy Manufacturing Jeep Tie Rod Clamps

From $75.00

• CNC machined from 1020 DOM material
• 100% bolt on
• Zinc plated for corrosion resistance
• Made in the U.S.A
• California Residents: WARNING

Rigid industries Light Kit Harness

From $115.99

• Connects to D-Series, SR-Q Series and SR-M Series Lights
• 25-Feet Long
• California Residents: WARNING

Rigid Industries Light Bar Wiring Harnesses

From $36.99

• Deutsch Connector
• Inline Fuse Holder
• California Residents: WARNING

Synergy Manufacturing Front Track Bar & Sector Shaft Brace Kit

From $275.00

• Front Track Bar & Sector Shaft Brace Kit
• 2 and 4-door models
• Includes SYN8069-01 & SYN8069-02
• Steering Sector Brace
• Track bar brace
• Laser cut and CNC bent from 3/16" high strength steel
• Gray powder coat finish for maximum corrosion resistance
• Bolt on installation
• Made in the USA
• California Residents: WARNING

Rigid Industries SR-M Series Fog Light Mounting Kits

From $159.99

• Fog Light Mount Kit
• Mounts 2 - D-Series And 1 - E-Series Light Bar
• Lower Bumper Mount Allows For A 30 in. SR-Series Light
• Lights Sold Separately
• California Residents: WARNING

Synergy Manufacturing Suspension Systems

From $1,070.00

• Synergy Manufacturing products & systems have been designed by real engineers with 10+ years of suspension design & experience in the off road industry.
• All Synergy products are designed with the use of the latest CAD engineering software to ensure the highest level of fit, finish, and performance.
• California Residents: WARNING

Synergy Manufacturing Front Track Bar Relocation Bracket

From $220.00

• This bracket raises the vehicle's axle side track bar mount
• Heavy-duty
• Special bolt-on design strengthens the factory mount that is prone to failure
• Laser cut from 3/16" steel & 2 stage powdercoat finish for maximum strength and durability
• Suspension components feature an abrasive resistant powder coat finish for maximum durability and corrosion resistance
• California Residents: WARNING

Synergy Manufacturing Heavy-Duty Steering Kit

From $1,050.00

• Requires a minimum of 2 inch front bump stop spacers
• 100% bolt-on
• Powdercoat finish for maximum durability and corrosion resistance
• Made in the U.S.A
• California Residents: WARNING

Rigid Industries ADAPT Light Bar Covers

From $17.99

• Fits 10 or 20 inch Adapt Light Bars
• Polycarbonate Plastic
• Easy to Snap On and Off
• Available in Black, Blue, Smoke, White, Amber, Clear, Green, Red
• California Residents: WARNING

Synergy Manufacturing HD Metal on Metal Tie Rod End Boot

From $10.00

• Tie Rod End Boots
• Made of tear/wear resistant black NBR and come with retaining springs
• Sold Individually
• California Residents: WARNING

Synergy Manufacturing Heavy Duty Weld-On Front Track Bar Brackets

From $175.00

• Weld on design for strength and reliability
• Bracket raises the vehicles suspension roll center
• Bracket moves track bar closer to the axle centerline to clear aftermarket highsteer knuckles/tie rod at full steering lock
• Raising the roll center reduces vehicle body roll and dramatically improves overall handling
• Weld on tab included for mounting factory or aftermarket steering stabilizer up and out of harms way
• Laser cut from 3/16" steel
• California Residents: WARNING

Rigid Industries Dual D-Series A-Pillar Mount Kits

From $145.99

• Double A-Pillar Mount
• Mounts 2 LED Dually/D2 Series Lights
• California Residents: WARNING

Rigid Industries A-Pillar Light Mounts

From $103.99

• A-Pillar Mount
• Sold As: Pair
• Lights Sold Separately
• California Residents: WARNING

Rigid Industries D-Series Fog Light Brackets

From $100.99

• Dually Fog Mount
• For Use w/D2 Series Lights
• Lights Sold Separately
• California Residents: WARNING

Synergy Manufacturing Front Axle Assurance Kits

From $310.00

• Designed to strengthen the front axle
• Provides a 59% increase in strength over the stock axle tubes
• Inner C Gussets are laser cut and CNC bent in a heavy duty 3-sided construction
• Made in the USA
• California Residents: WARNING

Synergy Manufacturing Dana 30/44 Inner C Gusset Kit 2.5 Inch Axle Housing

From $85.00

• CNC Bent For Precision Fit
• Laser cut for tight clearances
• Heavy Duty Three Side Construction
• Requires Welding: Fits All Jeep JK Dana 30/44 Fronts With 2.5 inch Axle Tubes
• Made in the U.S.A
• California Residents: WARNING

Rigid Industries Hi/Po Wire Harnesses

From $51.99

• 14 AWG Wire
• Deutsch Connector
• Inline Fuse Holder
• California Residents: WARNING

Synergy Grab Handles

From $100.00

• Powder coat finish eliminates corrosion that can occur under extreme element. Includes all hardware necessary for a quick and easy installation. Compatible with both hard and soft tops3
• California Residents: WARNING