Poison Spyder RockBrawler Rear Bumpers

From $769.99

• The Poison Spyder Rear Stinger Wrangler rear bumper is available in Bare Steel or Black Powder Coat
• 3/16 inch plate steel
• Maximize performance on the toughest trails
• High clearance, multi-faceted design Jeep rear bumper
• California Residents: WARNING

Poison Spyder Crusher Flares

From $599.99

• Poison Spyder Front Crusher Flare kit improves both the aesthetics and durability of your Jeep during your off road adventures
• Crusher Flares are constructed from 1.5 inch X .120 wall DOM tubing in combination with 1/8th and 3/16th high pressure plate steel
• The Crusher Flare kit utilizes stainless countersunk hardware to secure to the Jeeps outer skin and a combination of two heavy duty internal brackets that are coupled to the sub-frame
• Additionally the JK Front Crusher Flare Kit comes with a pair of rubber gaskets that isolates the fender from direct contact with the Jeep paint and body
• The Front Crusher Flare kit comes standard with mounting provisions to replace the factory side marker with an updated LED marker light
• Poison Spyder Front Crusher Flares retain the factory wheel well liner to protect the engine from trail and road debris
• California Residents: WARNING

Retrax RetraxPRO MX Retractable Tonneau Covers

From $2,099.99

• Retractable Tonneau Cover
• Rugged Aluminum Construction
• Matte Black
• California Residents: WARNING

Retrax RetraxONE MX Retractable Tonneau Covers

From $1,539.99

• Retractable Tonneau Cover
• One Piece Polycarbonate Construction
• California Residents: WARNING

Poison Spyder Crusher Corners

From $599.99

• Poison Spyder Crusher Corners are laser cut from high strength 3/16 inch plate steel then carefully roll-formed for a perfect fit to your Jeep's body lines
• Standard Crusher Corners come pre-configured with all of our most popular features including wheel opening, provisions for flush-mounted LED taillights (sold separately) and factory fuel filler opening
• All of the bolt holes are countersunk, and the supplied stainless steel flat head cap screws yield a smooth, flat surface to slide over rocks
• Available in Bare Steel or Black Powder Coat,Steel or aluminum, with and without flares and with and without holes for rear lights ther is a fit and style for everybody
• California Residents: WARNING

Poison Spyder Rocker Knockers

From $419.99

• Protect your Jeep rocker panels with Poison Spyder Rocker Knockers by cladding them in rugged, high strength 3/16" plate steel armor
• Manufactured to hug the lines of your Wrangler rocker panel perfectly forming a glove-fit with virtually no loss of ground clearance
• Specifically engineered for most Jeep CJ, YJ, TJ and LJ models
• Bolt holes are countersunk for the included stainless steel flat head hardware, which yields a flat, unobstructed surface to slide over obstacles.
• All mounting hardware is included as well as detailed installation instructions.
• California Residents: WARNING

Poison Spyder Hood Louvers

From $179.99

• Keep under-hood temperatures cooler by allowing hot air to escape through the vents
• The hood louvers allow for improved airflow into the engine bay helping your radiator and fan operate more efficently
• Crafted from quality, thick gauged aluminum sheet and CNC laser cut
• Light weight and corrosion resistant
• Easy installation (template included)
• Adds durability to the flimsy sheetmetal of most stock hoods
• Available in bare aluminum or black powder coat aluminum with corrosion resistant stainless steel fasteners included
• California Residents: WARNING

Poison Spyder Body Mounted Tire Carriers

From $999.99

• Poison Spyder Jeep Spare Tire Carrier
• Bare steel
• CNC laser cut
• Fit up to 40 inch tire and wheel combo on this Jeep tire carrier
• Mount for Hi-Lift jack
• Includes all mounting hardware
• California Residents: WARNING

Poison Spyder BFH Rear Bumpers

From $458.99

• The Poison Spyder Customs BFH™ Wrangler rear bumper is CNC laser-cut from high strength 3/16" plate steel, then precision brake-formed for an exact fit.
• Recovery Shackle Tabs are machined from 1" thick plate steel
• This Jeep rear bumper is intended for those hard-core wheelers who either wheel without a spare or strap the spare down into the bed of the Jeep.
• NOTE: Install requires cutting of stock frame rails!
• California Residents: WARNING

Poison Spyder Brawler Full Width Front Bumpers

From $683.99

• Full Width
• Plate Steel Construction
• Brawler Bar
• Easy Installation
• Recessed Fog Lamp Mounts
• Winch Compatibility
• Recovery Shaackle Tabs
• Optional Brawler Lite Skid
• California Residents: WARNING

Poison Spyder Body Armor Kits

From $295.99

• JK Body Armor is manufactured from either 3/16 inch high pressure steel plate or 3/16 inch 6061-T6 aluminum plate
• Available in Bare Steel or Black Powder Coat
• Spyder logo CNC cut into armor
• Bolt holes are countersunk in jeep rocker panel, and stainless steel flat head cap screws are supplied for a clean, flush-surface installation.
• Drilling of the body is required for installation on wrangler rocker panel.
• California Residents: WARNING

Poison Spyder Windshield Light Bar Mounts

From $249.99

• Available in black powder coat, bare steel and aluminum
• Attaches to a-pillar
• Made from 3/16 inch steel plate
• Includes rubber liners to avoid paint damage
• California Residents: WARNING

Retrax PowertraxPRO MX Retractable Tonneau Covers

From $2,099.99

• Retractable Tonneau Cover
• One Piece Polycarbonate Construction
• California Residents: WARNING

Poison Spyder Hood Logo Decals

From $59.99

• Available in black, silver, white or red
• California Residents: WARNING

Poison Spyder RockBrawler Bumpers

From $579.99

• This bumper is fabricated from 3/16 inch plate steel, CNC laser-cut and precision brake-formed into a low profile, high clearance design.
• The ends of the bumper extend far enough to protect the lower corner of the grille, but not far enough to hinder tire clearance or tire access to vertical obstacles.
• The two D-ring shackle mounts are CNC-machined from 1 inch plate steel to provide brute strength for the most demanding recovery operations.
• Accepts most major manufacturer's winches up to 15,000 lbs. capacity
• Recessed light mounts are provided for retention of the factory fog lamps or aftermarket off-road lamps
• California Residents: WARNING

Poison Spyder Windshield Decals

From $59.99

• Available in black, silver, white or red
• California Residents: WARNING

Poison Spyder LED Tail and Reverse Lights with Wiring Harnesses Kits

From $29.99

• Exclusive Plug-N-Play Design
• Supports 4 Inch Round LED Tailights
• Supports 2 1/2 Inch Round LED Back-Up lamps
• Supports LED License Plate and Third Brake Light
• California Residents: WARNING

Retrax EQ Retractable Tonneau Covers

From $3,199.99

• Enhanced operation via OE vehicle key fob, Retrax phone app, or optional cab-mounted remote touchpad
• Dual helical cable drive system combined with glide tracks embedded in the rail channel for an incredibly smooth and quiet operation
• Shortest canister in the industry for maximum truck bed space
• Cargo rack-compatible with T-Slot channels built into the cover’s rails
• High output LED Light mounted into the rail for full truck bed illumination
• Heavy-duty aluminum rolling cover assembly built strong enough to support 500 lbs.
• Anti-Pinch and manual disconnect features for the ultimate in safety and security
• Industry leading 5-year warranty

Retrax RetraxONE XR Retractable Tonneau Covers

From $1,699.99

• Compatible with most T-slot accessories from Rhino Rack, Yakima, Thule, and many more
• Increased Cargo Capacity Above & Below the Cover while maintaining functionality of the cover with loaded cargo
• Constructed from a one-piece sheet of polycarbonate that is engineered to retract without joints or hinges that can trap dust, wear out or freeze
• The patented low-profile design incorporates a front cover that is flush with the truck bed cover, which streamlines the overall appearance and provides a firm, dependable seal to help to keep the truck bed dry
• Sealed ball-bearing rollers mounted onto the aluminum support beams allow the RetraxONE XR truck bed cover to retract or close effortlessly without the use of springs or any kind of mechanism no moving parts to jam, freeze or fail

Retrax RetraxPRO XR Tonneau Covers

From $2,449.99

Retrax PowertraxPRO XR Tonneau Covers

From $2,949.99

• Compatible with most T-slot accessories from Rhino Rack, Yakima, Thule, and many more
• Increased Cargo Capacity Above & Below the Cover while maintaining functionality of the cover with loaded cargo
• Constructed from heavy-duty aluminum slats in a scratch-resistant matte finish that is engineered to retract without trapping dust, wear out or freeze
• The patented low-profile design incorporates a front cover that is flush with the truck bed cover, which streamlines the overall appearance and provides a firm, dependable seal to help to keep the truck bed dry
• Sealed ball-bearing rollers mounted onto the aluminum support beams allow the RetraxPRO XR truck bed cover to retract or close effortlessly without the use of springs or any kind of mechanism no moving parts to jam, freeze or fail

Poison Spyder Bruizer Front Bumpers

From $848.99

• Compact design protects lower grille corners while giving tires plenty of clearance and access to climb obstacles
• Recessed winch mount
• Brawler Bar made of DOM tubing with tube gussets
• SpyderShell™ Armor Coat semi-gloss black finish
• Recessed light mounts accept LED cube lights
• California Residents: WARNING

Poison Spyder Crawler Skid Plates

From $329.99

• Bolts to bottom of Poison Spyder JK Crawler series Front Bumpers (sold separately)
• Covers factory "crash bar" and protects stock Jeep electrical swaybar disconnect mechanism
• CNC laser cut from 3/16" plate steel
• Precision brake-formed for a perfect fit
• SpyderShell™ Armor Coat semi-gloss black finish
• California Residents: WARNING

Poison Spyder Crawler Rear Bumpers

From $789.99

• Compatible with Poison Spyder Frame Mounted Tire Carrier
• Large radius bends and die-formed features
• Integrated Class III Tow Hitch
• SpyderShell™ Armor Coat semi-gloss black finish
• Recessed mounts for LED backup lights
• California Residents: WARNING