King Shocks 2.5 OEM Performance Series - Rear - Remote Reservoir Shock Absorber with Adjuster - 25001-144A

• Fitment: Direct Fit
• Rear Monotube Shocks
• Adjustable
• Sold As A Pair
• California Residents: WARNING

King Shocks 2.5 OEM Performance Series - Rear - Piggyback Reservoir Shock Absorber with Adjuster - 25001-171A

• Fitment: Direct Fit
• Ford F250 and F350
• Rear
• Sold as a pair
• Adjustable
• Compressed Length: 18.346"
• Extended Length: 28.097"
• Monotube internal design
• Hard anodized 6063 aluminum alloy
• Heat treated 6061 aluminum alloy piston
• Wear bands are made from a Rulon composite that offers incredible wear resistance
• California Residents: WARNING
+ View More Specs - View Less Specs

King Shocks 2.5 OEM Performance Series - Front - Remote Reservoir Shock Absorber for 3 - 5" Lifts with Adjuster - 25001-176A

• Fitment: Direct Fit
• Adjustable front shocks
• Simple bolt on installation
• Large diameter micro-polished shafts
• Aeroquip high presure hoses on remote reservoirs
• 6063 aluminum alloy reservoirs dissipate heat quickly
• Precisely adjust compression with the twist of a billet knob
• 20 positive clicks of adjustment
• Sold As A Pair
• California Residents: WARNING
+ View More Specs - View Less Specs

RT Off-Road Lift Kit - RT21054

• Fitment: Direct Fit
• Lift and level kit
• Without Quadra-Lift air suspension
• Lifts the Front 2.75"
• Lifts the rear 2.3"
• 2 Front strut spacers
• 2 Rear coil spring spacers
• 2 Rear shock spacers and all necessary hardware
• California Residents: WARNING
+ View More Specs - View Less Specs

King Shocks 2.5 x 14" 200Lbs Coil Spring for Coilover Shock - SPR25-14-200

• Fitment: Universal Fit
• 2.5" Inside diameter
• 14" Length
• 200 lbs spring rate
• Coils are closed and ground to sit flat
• High tensile chrome silicon wire
• Wound for off-road applications
• Made in the USA
• California Residents: WARNING
+ View More Specs - View Less Specs

RT Off-Road Heavy-Duty Greaseable Shackle Kit - RT21023

• Fitment: Direct Fit
• Front and rear
• Set of 4
• Will add 3/4 inch of lift
• Kit includes: 8 - Shackle Plates
• 16 - Bushing Halves (Replaces P/N: 52002552)
• 4 - Large Sleeves
• 8 - Small Sleeves (Replaces P/N: 52002553)
• 8 - 1/2 inch x 4.5 inch Greasable Bolts
• 4 - 1/2 inch x 4.5 inch Non-Greasable Bolts
• 12 - 1/2 inch Mechanical Locking Nuts
• California Residents: WARNING
+ View More Specs - View Less Specs

King Shocks Shock Spherical Bearing - B1058

• Fitment: Universal Fit
• Sold individually
• Com 10T Bearing
• California Residents: WARNING

King Shocks 2.0 OEM Performance Series Front Steering Stabilizer - 20001-152

• Fitment: Direct Fit
• 07-18 Wranger JK, 2 & 4 Door
• Stabilizer bodies are bored and honed after cadmium plating to ensure cylindricity and an efficient piston seal that enhances valve function
• Highly developed "balanced flow" port designs on our 6061 aluminum alloy piston provide superior damping
• Heat treated stainless alloy valve shims do not fracture like plain carbon steel and resist deformation at high temperatures providing consistent fade free performance
• Wear bands are made from a Rulon composite that offers incredible wear resistance, low deformation under load and high compressive strength. Overlapping end design enhances sealing
• Special long wearing urethane seals have been tested on 18 wheelers for 450,000 miles without a failure
• Large 3/4" or 7/8" diameter shafts, depending on the stabilizer length, have a tensile strength of 100,000 pounds per square inch. They are hard chromed to combat rock bruising and micro-polished to a 6 RA finish for extended seal life
• Replaceable Teflon lined stainless steel spherical bearings will not rust and provide smooth articulation with no metal to metal contact.
• California Residents: WARNING
+ View More Specs - View Less Specs

King Shocks 3" Coil Springs - SPR3-16-700

• Fitment: Universal Fit
• 3 x 16 x 700 lbs
• Finest quality, high tensile, chrome silicon wire
• Coils are closed and ground to sit flat and deflect true
• Specifically wound for off-road applications
• California Residents: WARNING
+ View More Specs - View Less Specs

King Shocks 3 x 14" 600Lbs Coil Spring for Coilover Shock - SPR3-14-600

• Fitment: Universal Fit
• 3" Inside diameter
• 14" Length
• 600 lbs spring rate
• Coils are closed and ground to sit flat
• High tensile chrome silicon wire
• Wound for off-road applications
• Made in the USA
• California Residents: WARNING
+ View More Specs - View Less Specs

King Shocks 2.5 Smoothie Shaft Guard - OPT-PR25-1050

• Fitment: Universal Fit
• King Shocks Shaft Guards are available for any of King's 2.5" smooth cylinder shocks
• Any new 2.5 smoothie shock can be ordered with shaft guards, older shocks can be fitted with the proper shaft or rod end to accept our new shaft guards
• Shaft Guards are available for all 2.5 smoothie shocks with threaded aluminum rod ends, 2.5 shocks with welded rod ends or 2.5 shocks with pin shafts
• 2.5 Smoothie Shaft Guards are an optional upgrade on most OEM Kits (Check with sales for available applications)
• Please be aware that older shocks will need new rod ends or shaft assemblies to accept our new Shaft Guards
• One shaft guard per kit
• California Residents: WARNING
+ View More Specs - View Less Specs

RT Off-Road Control Arm Bracket Set - RT21015

• Fitment: Direct Fit
• Requires no additional alteration
• Sold As A Pair
• California Residents: WARNING

King Shocks 2.5 x 12" 300Lbs Coil Spring for Coilover Shock - SPR3-14-700

• Fitment: Universal Fit
• 3" Inside diameter
• 14" Length
• 700 lbs spring rate
• Coils are closed and ground to sit flat
• High tensile chrome silicon wire
• Wound for off-road applications
• Made in the USA
• California Residents: WARNING
+ View More Specs - View Less Specs

King Shocks 2.0 Bump Stop - BS2040

• Fitment: Universal Fit
• 2.0 x 4" bump stop
• Double sealed Schrader cover
• 4130 Chromoly mounting sleeves
• Unique mounting boss design with indexing pin securely locates the bump stop without pinching the outside of the tube
• Large 1-1/4" or 1-5/8" diameter shafts have a minimum tensile strength of 75,000 pounds per square inch
• Aluminum components are machined from aircraft quality billet
• O-ring on shaft helps to gauge shaft travel
• Mounts with a simple yet effective single bolt design
• California Residents: WARNING
+ View More Specs - View Less Specs

King Shocks 2.5 Shorty Bump Stop - BS2525

• Fitment: Universal Fit
• 2.5 x 2.5" bump stop
• Double sealed Schrader cover
• 4130 Chromoly mounting sleeves
• Unique mounting boss design with indexing pin securely locates the bump stop without pinching the outside of the tube
• Large 1-1/4" or 1-5/8" diameter shafts have a minimum tensile strength of 75,000 pounds per square inch
• Aluminum components are machined from aircraft quality billet
• O-ring on shaft helps to gauge shaft travel
• Mounts with a simple yet effective single bolt design
• California Residents: WARNING
+ View More Specs - View Less Specs

King Shocks 3.0 OEM Performance Series - Rear - Piggyback Reservoir Bypass Shock Absorber - 30001-402