ICON Vehicle Dynamics Stage 1 Suspension Systems

From $1,139.85

• Adds 30% More Wheel Travel over Stock
• No Welding or Cutting
• Made in the USA
• Multiple Lift Kits for Jeeps available
• California Residents: WARNING

Synergy Manufacturing Jeep Tie Rod Clamps

From $75.00

• CNC machined from 1020 DOM material
• 100% bolt on
• Zinc plated for corrosion resistance
• Made in the U.S.A
• California Residents: WARNING

ICON Vehicle Dynamics Rear Trailing Arm Kits

From $579.95

• These trailing arms are light, strong, and have been engineered to increase the off-road ride quality the vehicle
• Constructed out of 6061 CNC-machined billet aluminum
• They include 16T Rod Rod Ends that have a load rating of over 40,000 lbs of pressure
• dual rate bushing on the axle side for excellent articulation characteristics with minimal deflection
• On-truck adjustability using ICON's pinch housing
• California Residents: WARNING

ICON Vehicle Dynamics Coilover Shock Kits

From $1,147.46

• Increased wheel travel and ride quality over stock
• Vehicle specific tuned for superior shock damping and control
• External reservoir to attain cooler operating temperatures during extended offroad use
• 6061 Aircraft grade aluminum CNC machined components
• Corrosion resistant CAD plated shock body with 7/8 shaft
• The ICON CDC Valve upgrade is included for those desiring an easy way to tune the ride externally with 10 settings from soft to hard
• California Residents: WARNING

ICON Vehicle Dynamics V.S. 2.5 Series Remote Reservoir Shocks

From $1,089.95

• Increased wheel travel and ride quality over stock
• Vehicle specific tuned for superior shock damping and control
• External reservoir to attain cooler operating temperatures during extended offroad use
• ICON CDCV equipped for external tuneability of your shocks
• ICON engineered Eibach Springs
• 6061 Aircraft grade aluminum CNC machined components
• Corrosion resistant CAD plated shock body with 7/8 shaft
• FK Rod End bearings for extended longevity and minimal deflection
• California Residents: WARNING

Synergy Manufacturing Front Track Bar & Sector Shaft Brace Kit

From $275.00

• Front Track Bar & Sector Shaft Brace Kit
• 2 and 4-door models
• Includes SYN8069-01 & SYN8069-02
• Steering Sector Brace
• Track bar brace
• Laser cut and CNC bent from 3/16" high strength steel
• Gray powder coat finish for maximum corrosion resistance
• Bolt on installation
• Made in the USA
• California Residents: WARNING

ICON Vehicle Dynamics 2.0 Aluminum Series Shocks

From $189.95

• Aluminum Series shock absorbers are the ultimate in cost effective upgrades, specifically tailored by ICON engineers for your application
• Premium grade 5WT shock oil for consistent suspension damping along a wide temperature range
• Nitrogen charged monotube design with internal reservoir
• 5/8? chrome plated hardened steel shaft resists corrosion and pits
• 6061 aluminum rod end, top cap, and internals ensure strength and durability
• Polyurethane bushings, zinc plated sleeves, and forged steel mounting stems for OE factory type fitment
• California Residents: WARNING

Synergy Manufacturing Suspension Systems

From $1,070.00

• Synergy Manufacturing products & systems have been designed by real engineers with 10+ years of suspension design & experience in the off road industry.
• All Synergy products are designed with the use of the latest CAD engineering software to ensure the highest level of fit, finish, and performance.
• California Residents: WARNING

Synergy Manufacturing Front Track Bar Relocation Bracket

From $220.00

• This bracket raises the vehicle's axle side track bar mount
• Heavy-duty
• Special bolt-on design strengthens the factory mount that is prone to failure
• Laser cut from 3/16" steel & 2 stage powdercoat finish for maximum strength and durability
• Suspension components feature an abrasive resistant powder coat finish for maximum durability and corrosion resistance
• California Residents: WARNING

Synergy Grab Handles

From $100.00

• Powder coat finish eliminates corrosion that can occur under extreme element. Includes all hardware necessary for a quick and easy installation. Compatible with both hard and soft tops3
• California Residents: WARNING

Synergy Manufacturing Rear Track Bars

From $225.00

• Bent to clear most aftermarket differential covers
• Retains factory track bar mounting bolts and hardware
• Made from high quality 1-1/4 inch 1018 CR Solid Round Barstock
• Allows centering of rear axle when running a suspension lift
• 100% bolt on
• Rear track bar relocation bracket for lifts taller than 4.5 inch
• Made in the U.S.A
• California Residents: WARNING

Synergy Manufacturing Shock Mounts

From $100.00

• Synergy Manufacturing products & systems have been designed by real engineers with 10+ years of suspension design & experience in the off road industry. All Synergy products are designed with the use of the latest CAD engineering software to ensure the highest level of fit, finish, and performance.
• California Residents: WARNING

Synergy Manufacturing Adjustable Front Lower Control Arms

From $500.00

ICON Vehicle Dynamics 2.5 Series Rear Shocks

From $1,104.95

• 2.5 inch Diameter Shock Body
• 7/8 inch Shock Shaft
• Increased wheel travel
• 100% Re-buildable and Re-valvable
• Made in the USA
• California Residents: WARNING

ICON Vehicle Dynamics Steering Stabilizers

From $189.95

• Icon steering stabilizer kits
• Various styles
• Varity of fitments
• California Residents: WARNING

Synergy Manufacturing Air Compressor Brackets

From $60.00

• Synergy Manufacturing Air Compressor Brackets easily bolt on mount to supply a spot to mount an onboard air compressor under the hood of your JK
• Works with VIAIR 100, 400, & 450 series compressors
• California Residents: WARNING

Synergy Manufacturing Adjustable Steering Column

From $15.00

• Allows for easy adjustment of steering column
• Laser cut from 3/16 inch steel
• Made in the USA
• California Residents: WARNING

Synergy Manufacturing Heavy Duty Metal-on-Metal Tie Rod End

From $60.00

• Fully greasable sintered metal on metal bushing design
• Tie Rod end boot is made from silicone and polyurethane
• 7/8-18 UNF LH Thread
• Spring loaded bearing design keeps pressure on bearings
• Made in the U.S.A
• California Residents: WARNING

ICON Vehicle Dynamics Front U-Bolt Kit

From $64.95

• Kits come with U-bolts, Nuts and Washers
• Precision engineered
• Tested to outperform all comparable products on the market
• Designed for perfect fit and function
• California Residents: WARNING

Synergy Manufacturing Limit Straps

From $25.00

• Limit Straps
• 8" up to 20" inch Lengths Hole to Hole
• Plated end fittings are made from tough 4130 steel and have 1/2" hole
• U.S. made 1.75" nylon webbing with a 7000 lb. rating and superior flexibility
• Quad wrap (ultra strength)
• Eyelets have an integrated deflector clip to minimize abrasion
• Sold individually
• Made in the USA
• California Residents: WARNING

ICON Vehicle Dynamics Uniball Billet Cover Caps

From $63.95

• Protection from collecting dirt, mud, & road grime on top of uniball which can damage the PTFE liner of the uniball
• 6061 CNC-machined billet aluminum
• Black anodized with laser etched ICON shield logo
• Attaches using 3M neoprene adhesive rings
• California Residents: WARNING

ICON Vehicle Dynamics Hydraulic Bump Stops

From $106.95

• Help control the final up travel of the suspension
• Bolt On Installation
• Includes Mounts and Bump Stops
• California Residents: WARNING

ICON Vehicle Dynamics Leaf Spring Packs

From $228.95

• Thin multi-leaf progressive construction makes sure the truck will ride smooth and ensures less spring fatigue to minimize sagging
• The compact design of the mini pack allows for a minimal change in spring rate, thus keeping stock ride quality
• California Residents: WARNING

Synergy Manufacturing Radius Axle Link Brackets

From $1,000.00

• Synergy Manufacturing Radius Axle Link Brackets are designed to be used on an axle housing with a 3" diameter
• The link brackets are laser cut and CNC bent from 1/4" carbon steel
• The heavy duty 3 sided construction provides for a VERY rigid bracket and is designed to be used with any of our large rod ends with our high misalignment spacers & all of our rebuildable spherical bearing assemblies
• California Residents: WARNING