Poison Spyder RockBrawler Rear Bumpers

From $769.99

• The Poison Spyder Rear Stinger Wrangler rear bumper is available in Bare Steel or Black Powder Coat
• 3/16 inch plate steel
• Maximize performance on the toughest trails
• High clearance, multi-faceted design Jeep rear bumper
• California Residents: WARNING

Poison Spyder Crusher Flares

From $599.99

• Poison Spyder Front Crusher Flare kit improves both the aesthetics and durability of your Jeep during your off road adventures
• Crusher Flares are constructed from 1.5 inch X .120 wall DOM tubing in combination with 1/8th and 3/16th high pressure plate steel
• The Crusher Flare kit utilizes stainless countersunk hardware to secure to the Jeeps outer skin and a combination of two heavy duty internal brackets that are coupled to the sub-frame
• Additionally the JK Front Crusher Flare Kit comes with a pair of rubber gaskets that isolates the fender from direct contact with the Jeep paint and body
• The Front Crusher Flare kit comes standard with mounting provisions to replace the factory side marker with an updated LED marker light
• Poison Spyder Front Crusher Flares retain the factory wheel well liner to protect the engine from trail and road debris
• California Residents: WARNING

Poison Spyder Crusher Corners

From $599.99

• Poison Spyder Crusher Corners are laser cut from high strength 3/16 inch plate steel then carefully roll-formed for a perfect fit to your Jeep's body lines
• Standard Crusher Corners come pre-configured with all of our most popular features including wheel opening, provisions for flush-mounted LED taillights (sold separately) and factory fuel filler opening
• All of the bolt holes are countersunk, and the supplied stainless steel flat head cap screws yield a smooth, flat surface to slide over rocks
• Available in Bare Steel or Black Powder Coat,Steel or aluminum, with and without flares and with and without holes for rear lights ther is a fit and style for everybody
• California Residents: WARNING

Poison Spyder Rocker Knockers

From $419.99

• Protect your Jeep rocker panels with Poison Spyder Rocker Knockers by cladding them in rugged, high strength 3/16" plate steel armor
• Manufactured to hug the lines of your Wrangler rocker panel perfectly forming a glove-fit with virtually no loss of ground clearance
• Specifically engineered for most Jeep CJ, YJ, TJ and LJ models
• Bolt holes are countersunk for the included stainless steel flat head hardware, which yields a flat, unobstructed surface to slide over obstacles.
• All mounting hardware is included as well as detailed installation instructions.
• California Residents: WARNING

Poison Spyder Hood Louvers

From $179.99

• Keep under-hood temperatures cooler by allowing hot air to escape through the vents
• The hood louvers allow for improved airflow into the engine bay helping your radiator and fan operate more efficently
• Crafted from quality, thick gauged aluminum sheet and CNC laser cut
• Light weight and corrosion resistant
• Easy installation (template included)
• Adds durability to the flimsy sheetmetal of most stock hoods
• Available in bare aluminum or black powder coat aluminum with corrosion resistant stainless steel fasteners included
• California Residents: WARNING

Poison Spyder Body Mounted Tire Carriers

From $999.99

• Poison Spyder Jeep Spare Tire Carrier
• Bare steel
• CNC laser cut
• Fit up to 40 inch tire and wheel combo on this Jeep tire carrier
• Mount for Hi-Lift jack
• Includes all mounting hardware
• California Residents: WARNING

Poison Spyder BFH Rear Bumpers

From $458.99

• The Poison Spyder Customs BFH™ Wrangler rear bumper is CNC laser-cut from high strength 3/16" plate steel, then precision brake-formed for an exact fit.
• Recovery Shackle Tabs are machined from 1" thick plate steel
• This Jeep rear bumper is intended for those hard-core wheelers who either wheel without a spare or strap the spare down into the bed of the Jeep.
• NOTE: Install requires cutting of stock frame rails!
• California Residents: WARNING

Poison Spyder Body Armor Kits

From $295.99

• JK Body Armor is manufactured from either 3/16 inch high pressure steel plate or 3/16 inch 6061-T6 aluminum plate
• Available in Bare Steel or Black Powder Coat
• Spyder logo CNC cut into armor
• Bolt holes are countersunk in jeep rocker panel, and stainless steel flat head cap screws are supplied for a clean, flush-surface installation.
• Drilling of the body is required for installation on wrangler rocker panel.
• California Residents: WARNING

Gorilla Automotive Wrenches and Sockets

From $23.85

• Designed to fit just about any and all lug nuts and bolts on your vehicle.
• California Residents: WARNING

Poison Spyder RockBrawler Bumpers

From $579.99

• This bumper is fabricated from 3/16 inch plate steel, CNC laser-cut and precision brake-formed into a low profile, high clearance design.
• The ends of the bumper extend far enough to protect the lower corner of the grille, but not far enough to hinder tire clearance or tire access to vertical obstacles.
• The two D-ring shackle mounts are CNC-machined from 1 inch plate steel to provide brute strength for the most demanding recovery operations.
• Accepts most major manufacturer's winches up to 15,000 lbs. capacity
• Recessed light mounts are provided for retention of the factory fog lamps or aftermarket off-road lamps
• California Residents: WARNING

Gorilla Automotive Lug Nuts

From $1.08

Gorilla Automotive Small Diameter Lug Nut Keys

From $5.67

• Black
• Required when purchasing an individual 1/2 inch splined lug nut
• California Residents: WARNING

Gorilla Automotive Wheel Lock Sets

From $21.15

Gorilla Automotive Black Lug Nut Packs

From $9.90

Gorilla Automotive Valve Stems

From $0.50

• Knurled edges for easy on/off access
• Set of 4
• Slotted cap
• Fits most aftermarket rims
• California Residents: WARNING

Gorilla Automotive Internal Spline Wheel Locks

From $22.50

Poison Spyder Bruizer Front Bumpers

From $848.99

• Compact design protects lower grille corners while giving tires plenty of clearance and access to climb obstacles
• Recessed winch mount
• Brawler Bar made of DOM tubing with tube gussets
• SpyderShell™ Armor Coat semi-gloss black finish
• Recessed light mounts accept LED cube lights
• California Residents: WARNING

Poison Spyder Crawler Skid Plates

From $329.99

• Bolts to bottom of Poison Spyder JK Crawler series Front Bumpers (sold separately)
• Covers factory "crash bar" and protects stock Jeep electrical swaybar disconnect mechanism
• CNC laser cut from 3/16" plate steel
• Precision brake-formed for a perfect fit
• SpyderShell™ Armor Coat semi-gloss black finish
• California Residents: WARNING

Poison Spyder Crawler Rear Bumpers

From $789.99

• Compatible with Poison Spyder Frame Mounted Tire Carrier
• Large radius bends and die-formed features
• Integrated Class III Tow Hitch
• SpyderShell™ Armor Coat semi-gloss black finish
• Recessed mounts for LED backup lights
• California Residents: WARNING

Gorilla Wheel Spacers

From $101.69

Gorilla Wheel Adapters

From $101.69