Welcome Guest
SHOP BY CATEGORY
SHOP BY BRAND
SHOP BY VEHICLE
Sales Support 877-474-4821
877-260-5452
Call Our Stateside Experts!
Front ICON Vehicle Dynamics/TeraFlex Front
Front ICON Vehicle Dynamics/TeraFlex On Sale
3 Product Groups
Switch to View Products
ICON Vehicle Dynamics Front Drive Shafts with Yoke Adapter
Icon Suspension Front Drive Shaft with Yoke AdapterFrom $749.95
- Works with automatic transmission only
- Direct replacement front Jeep JK CV Drive Shaft with 1310 U-Joints
- Increases angularity without binding
- Made in the U.S.A. with Genuine Spicer parts
- California Residents: WARNING
From $749.95
On Sale
TeraFlex CRD60 HD Axle Assemblies
TeraFlex CRD60 Axle AssembliesFrom $2,974.99
- Tera CRD60 specific high-pinion rear axle housing design
- HD bearing caps increase rigidity and reduce ring and pinion distortion
- Constant Radius Design (CRD) provides maximum ground clearance regardless of pinion angle
- Built-in “skimmer” cuts ring gear oil halo and forces it into the pinion bearings
- Outer pinion bearing pocket features a renewable oil reservoir that sends cool oil to the pinion bearing
- Oversized outer pinion bearing handles increased torque and high-load conditions
- High-capacity housing holds maximum amount of oil
- Asymmetric housing design for extra-long tube side strength
- Pre-installed inner axle seals
- Ductile cast iron housing with increased rib gussets
- HD ductile iron differential cover with increased cover mounting area
- Integrated lower control arm skid plates
- High-flow oil passages
- Bottom oil drain hole for simple fluid changes
- Reinforced rear track bar mount with multiple mounting locations
- UV protected triple-stage powder coat for corrosion resistance
- 1/4”-thick CNC laser cut axle brackets for extreme strength
- Pre-installed upper control arm bushings
- Proper pinion angle for lifted applications
- Features a raised pinion angle and raised track bar bracket
- Pre-tapped hole on spring perch for bump stop extensions
- Pre-drilled holes for limit straps and lower spring retainers
- Retains all ESP, ABS, and speedometer sensor capability
- 100% engineered, designed, and built in the USA with new components
From $2,974.99
TeraFlex Tera44 HD Axle Assemblies
TeraFlex Tera44 HD Axle AssembliesFrom $4,794.99
- 3.25” O.D. x 0.25” wall axle tube increases torsional strength to resist bending with minimal weight increase
- Asymmetric housing design for extra-long tube side strength
- Pre-installed inner axle seals
- HD forged inner knuckles with greater upper and lower section strength
- Ductile cast iron housing with increased rib gussets
- HD ductile iron differential cover
- Smooth radius bottom design to glide over rocks and obstacles
- Integrated lower control arm skid plates
- High-flow oil passages and bottom oil drain hole for simple fluid changes
- Reinforced front track bar mount (ties into spring pad) for greater strength
- UV protected triple-stage powder coat for corrosion resistance
- 1/4”-thick CNC laser cut axle brackets for extreme strength
- Integrated factory location upper control arm mount
- Pre-installed upper control arm bushings
- Proper pinion angle for lifted applications
- Pre-tapped hole on spring perch for bump stop extensions
- Pre-drilled holes for limit straps and lower spring retainers
- Retains all ESP, ABS, and speedometer sensor capability
- 100% engineered, designed, and built in the USA with new components
From $4,794.99
12 Products
Switch to View Product Groups
4WP PROTECTION PLAN
Our Protection Plan covers your investment above and beyond the manufacturer's coverage. For only 10% more, if your item is damaged, fails or malfunctions, we'll replace it for free!
Sign In Or Create an Account
Reset Password
An email is sent to .
Enter email address to change your password
After you submit your email address, you'll receive an email a link that will let you change your password.
Choose Your Secure Checkout Method
Create An Account
Add to Wishlist
TeraFlex Tera44 HD Front Axle with 4.56 Gears & ARB Air Locker - 3552456
How to Get it
Free! Curbside & In-Store Pickup: Select A Store Near You
Ship to Home:
Only 1 left in Stock ?- Fitment: Direct Fit
- JK Wrangler with up to 3 inch lift
- 4.56 gear ratio
- WMS-WMS: 65.5 inches
- 3.25 O.D x 0.5 inch wall extreme duty axle tube increases torsional strength to resist bending
- 5x5 bolt pattern
- Includes: ARB air locker, Spicer ring & pinion, Spicer bearings and install kits, TeraFlex HD ball joints and factory yoke
- Asymmetric housing design for extra-long tube side strength
- Pre-installed inner axle seals
- HD forged inner knuckles with greater upper and lower section strength
- Ductile cast iron housing with increased rib gussets
- HD ductile iron differential cover
- Smooth radius bottom design to glide over rocks and obstacles
- Integrated lower control arm skid plates
- High-flow oil passages and bottom oil drain hole for simple fluid changes
- Reinforced front track bar mount (ties into spring pad) for greater strength
- UV protected triple-stage powder coat for corrosion resistance
- 1/4"-thick CNC laser cut axle brackets for extreme strength
- Integrated factory location upper control arm mount
- Pre-installed upper control arm bushings
- Proper pinion angle for lifted JK applications
- Pre-tapped hole on spring perch for bump stop extensions
- Pre-drilled holes for limit straps and lower spring retainers
- Retains all JK ESP, ABS, and speedometer sensor capability
- 100% engineered, designed, and built in the USA with new components
- California Residents: WARNING + View More Specs - View Less Specs
$4,794.99
Only 1 left in Stock ?
$4,794.99
Only 1 left in Stock
?
LOW PRICE GUARANTEE
EASY RETURNS
How to Get it
Free! Curbside & In-Store Pickup: Select A Store Near You
Ship to Home:
Only 1 left in Stock ?- Fitment: Direct Fit
- JK Wrangler with up to 3 inch lift
- 4.56 gear ratio
- WMS-WMS: 65.5 inches
- 3.25 O.D x 0.5 inch wall extreme duty axle tube increases torsional strength to resist bending
- 5x5 bolt pattern
- Includes: ARB air locker, Spicer ring & pinion, Spicer bearings and install kits, TeraFlex HD ball joints and factory yoke
- Asymmetric housing design for extra-long tube side strength
- Pre-installed inner axle seals
- HD forged inner knuckles with greater upper and lower section strength
- Ductile cast iron housing with increased rib gussets
- HD ductile iron differential cover
- Smooth radius bottom design to glide over rocks and obstacles
- Integrated lower control arm skid plates
- High-flow oil passages and bottom oil drain hole for simple fluid changes
- Reinforced front track bar mount (ties into spring pad) for greater strength
- UV protected triple-stage powder coat for corrosion resistance
- 1/4"-thick CNC laser cut axle brackets for extreme strength
- Integrated factory location upper control arm mount
- Pre-installed upper control arm bushings
- Proper pinion angle for lifted JK applications
- Pre-tapped hole on spring perch for bump stop extensions
- Pre-drilled holes for limit straps and lower spring retainers
- Retains all JK ESP, ABS, and speedometer sensor capability
- 100% engineered, designed, and built in the USA with new components
- California Residents: WARNING + View More Specs - View Less Specs
4WP PROTECTION PLAN
Our Protection Plan covers your investment above and beyond the manufacturer's coverage. For only 10% more, if your item is damaged, fails or malfunctions, we'll replace it for free!
Sign In Or Create an Account
Reset Password
An email is sent to .
Enter email address to change your password
After you submit your email address, you'll receive an email a link that will let you change your password.
Choose Your Secure Checkout Method
Create An Account
Add to Wishlist
Icon Suspension Front Drive Shaft with Yoke Adapter - 22014
- Fitment: Direct Fit
- 07-18 Wrangler JK, 2 & 4 Door
- Works with automatic transmission only
- Direct replacement front Jeep JK CV Drive Shaft with 1310 U-Joints
- Increases angularity without binding
- Made in the U.S.A. with Genuine Spicer parts
- California Residents: WARNING + View More Specs - View Less Specs
PROMOTIONS AUTOMATICALLY APPLIED
Save 15% Instantly On Select Icon Alloy Wheels And Suspension Products - DISCOUNTED PRICE SHOWN
Lowest Price! Guaranteed! Request A Price Match
Qualifies for Free Shipping
$749.95
$787.45
On Backorder
Contact Us for Availability or Alternatives
LOW PRICE GUARANTEE
EASY RETURNS
Email me when this product comes in stock
LOW PRICE GUARANTEE
EASY RETURNS
$749.95
$787.45
On Backorder
Contact Us for Availability or Alternatives
Email me when this product comes in stock
LOW PRICE GUARANTEE
EASY RETURNS
- Fitment: Direct Fit
- 07-18 Wrangler JK, 2 & 4 Door
- Works with automatic transmission only
- Direct replacement front Jeep JK CV Drive Shaft with 1310 U-Joints
- Increases angularity without binding
- Made in the U.S.A. with Genuine Spicer parts
- California Residents: WARNING + View More Specs - View Less Specs
PROMOTIONS AUTOMATICALLY APPLIED
Save 15% Instantly On Select Icon Alloy Wheels And Suspension Products - DISCOUNTED PRICE SHOWN
Lowest Price! Guaranteed! Request A Price Match
4WP PROTECTION PLAN
Our Protection Plan covers your investment above and beyond the manufacturer's coverage. For only 10% more, if your item is damaged, fails or malfunctions, we'll replace it for free!
Sign In Or Create an Account
Reset Password
An email is sent to .
Enter email address to change your password
After you submit your email address, you'll receive an email a link that will let you change your password.
Choose Your Secure Checkout Method
Create An Account
Add to Wishlist
TeraFlex Tera44 Rubicon HD Front Axle with 4.10 Gears & OEM Rubicon Locker - 3524410
- Fitment: Direct Fit
- JK Wrangler with up to 3 inch lift
- 4.10 gear ratio
- WMS-WMS: 65.5 inches
- 3.25 O.D x 0.5 inch wall extreme duty axle tube increases torsional strength to resist bending
- 5x5 bolt pattern
- Includes: OEM Rubicon locker, Spicer ring & pinion, Spicer bearings and install kits, TeraFlex HD ball joints and factory yoke
- Asymmetric housing design for extra-long tube side strength
- Pre-installed inner axle seals
- HD forged inner knuckles with greater upper and lower section strength
- Ductile cast iron housing with increased rib gussets
- HD ductile iron differential cover
- Smooth radius bottom design to glide over rocks and obstacles
- Integrated lower control arm skid plates
- High-flow oil passages and bottom oil drain hole for simple fluid changes
- Reinforced front track bar mount (ties into spring pad) for greater strength
- UV protected triple-stage powder coat for corrosion resistance
- 1/4"-thick CNC laser cut axle brackets for extreme strength
- Integrated factory location upper control arm mount
- Pre-installed upper control arm bushings
- Proper pinion angle for lifted JK applications
- Pre-tapped hole on spring perch for bump stop extensions
- Pre-drilled holes for limit straps and lower spring retainers
- Retains all JK ESP, ABS, and speedometer sensor capability
- 100% engineered, designed, and built in the USA with new components
- California Residents: WARNING + View More Specs - View Less Specs
$4,794.99
On Backorder
Contact Us for Availability or Alternatives
LOW PRICE GUARANTEE
EASY RETURNS
Email me when this product comes in stock
LOW PRICE GUARANTEE
EASY RETURNS
TeraFlex Tera44 Rubicon HD Front Axle with 4.10 Gears & OEM Rubicon Locker - 3524410
Part #: TER3524410$4,794.99
On Backorder
Contact Us for Availability or Alternatives
Email me when this product comes in stock
LOW PRICE GUARANTEE
EASY RETURNS
- Fitment: Direct Fit
- JK Wrangler with up to 3 inch lift
- 4.10 gear ratio
- WMS-WMS: 65.5 inches
- 3.25 O.D x 0.5 inch wall extreme duty axle tube increases torsional strength to resist bending
- 5x5 bolt pattern
- Includes: OEM Rubicon locker, Spicer ring & pinion, Spicer bearings and install kits, TeraFlex HD ball joints and factory yoke
- Asymmetric housing design for extra-long tube side strength
- Pre-installed inner axle seals
- HD forged inner knuckles with greater upper and lower section strength
- Ductile cast iron housing with increased rib gussets
- HD ductile iron differential cover
- Smooth radius bottom design to glide over rocks and obstacles
- Integrated lower control arm skid plates
- High-flow oil passages and bottom oil drain hole for simple fluid changes
- Reinforced front track bar mount (ties into spring pad) for greater strength
- UV protected triple-stage powder coat for corrosion resistance
- 1/4"-thick CNC laser cut axle brackets for extreme strength
- Integrated factory location upper control arm mount
- Pre-installed upper control arm bushings
- Proper pinion angle for lifted JK applications
- Pre-tapped hole on spring perch for bump stop extensions
- Pre-drilled holes for limit straps and lower spring retainers
- Retains all JK ESP, ABS, and speedometer sensor capability
- 100% engineered, designed, and built in the USA with new components
- California Residents: WARNING + View More Specs - View Less Specs
4WP PROTECTION PLAN
Our Protection Plan covers your investment above and beyond the manufacturer's coverage. For only 10% more, if your item is damaged, fails or malfunctions, we'll replace it for free!
Sign In Or Create an Account
Reset Password
An email is sent to .
Enter email address to change your password
After you submit your email address, you'll receive an email a link that will let you change your password.
Choose Your Secure Checkout Method
Create An Account
Add to Wishlist
TeraFlex Tera44 Rubicon HD Front Axle with 4.56 Gears & OEM Rubicon Locker - 3524456
- Fitment: Direct Fit
- JK Wrangler with up to 3 inch lift
- 4.56 gear ratio
- WMS-WMS: 65.5 inches wide
- 3.25 O.D x 0.5 inch wall extreme duty axle tube increases torsional strength to resist bending
- 5x5 bolt pattern
- Includes: OEM Rubicon locker, Spicer ring & pinion, Spicer bearings and install kits, TeraFlex HD ball joints and factory yoke
- Asymmetric housing design for extra-long tube side strength
- Pre-installed inner axle seals
- HD forged inner knuckles with greater upper and lower section strength
- Ductile cast iron housing with increased rib gussets
- HD ductile iron differential cover
- Smooth radius bottom design to glide over rocks and obstacles
- Integrated lower control arm skid plates
- High-flow oil passages and bottom oil drain hole for simple fluid changes
- Reinforced front track bar mount (ties into spring pad) for greater strength
- UV protected triple-stage powder coat for corrosion resistance
- 1/4"-thick CNC laser cut axle brackets for extreme strength
- Integrated factory location upper control arm mount
- Pre-installed upper control arm bushings
- Proper pinion angle for lifted JK applications
- Pre-tapped hole on spring perch for bump stop extensions
- Pre-drilled holes for limit straps and lower spring retainers
- Retains all JK ESP, ABS, and speedometer sensor capability
- 100% engineered, designed, and built in the USA with new components
- California Residents: WARNING + View More Specs - View Less Specs
$4,794.99
On Backorder
Contact Us for Availability or Alternatives
LOW PRICE GUARANTEE
EASY RETURNS
Email me when this product comes in stock
LOW PRICE GUARANTEE
EASY RETURNS
TeraFlex Tera44 Rubicon HD Front Axle with 4.56 Gears & OEM Rubicon Locker - 3524456
Part #: TER3524456$4,794.99
On Backorder
Contact Us for Availability or Alternatives
Email me when this product comes in stock
LOW PRICE GUARANTEE
EASY RETURNS
- Fitment: Direct Fit
- JK Wrangler with up to 3 inch lift
- 4.56 gear ratio
- WMS-WMS: 65.5 inches wide
- 3.25 O.D x 0.5 inch wall extreme duty axle tube increases torsional strength to resist bending
- 5x5 bolt pattern
- Includes: OEM Rubicon locker, Spicer ring & pinion, Spicer bearings and install kits, TeraFlex HD ball joints and factory yoke
- Asymmetric housing design for extra-long tube side strength
- Pre-installed inner axle seals
- HD forged inner knuckles with greater upper and lower section strength
- Ductile cast iron housing with increased rib gussets
- HD ductile iron differential cover
- Smooth radius bottom design to glide over rocks and obstacles
- Integrated lower control arm skid plates
- High-flow oil passages and bottom oil drain hole for simple fluid changes
- Reinforced front track bar mount (ties into spring pad) for greater strength
- UV protected triple-stage powder coat for corrosion resistance
- 1/4"-thick CNC laser cut axle brackets for extreme strength
- Integrated factory location upper control arm mount
- Pre-installed upper control arm bushings
- Proper pinion angle for lifted JK applications
- Pre-tapped hole on spring perch for bump stop extensions
- Pre-drilled holes for limit straps and lower spring retainers
- Retains all JK ESP, ABS, and speedometer sensor capability
- 100% engineered, designed, and built in the USA with new components
- California Residents: WARNING + View More Specs - View Less Specs
4WP PROTECTION PLAN
Our Protection Plan covers your investment above and beyond the manufacturer's coverage. For only 10% more, if your item is damaged, fails or malfunctions, we'll replace it for free!
Sign In Or Create an Account
Reset Password
An email is sent to .
Enter email address to change your password
After you submit your email address, you'll receive an email a link that will let you change your password.
Choose Your Secure Checkout Method
Create An Account
Add to Wishlist
TeraFlex Tera44 Rubicon HD Front Axle with 4.88 Gears & OEM Rubicon Locker - 3524488
- Fitment: Direct Fit
- JK Wrangler with up to 3 inch lift
- 4.88 gear ratio
- WMS-WMS: 65.5 inches wide
- 3.25 O.D x 0.5 inch wall extreme duty axle tube increases torsional strength to resist bending
- 5x5 bolt pattern
- Includes: OEM Rubicon locker, Spicer ring & pinion, Spicer bearings and install kits, TeraFlex HD ball joints and factory yoke
- Asymmetric housing design for extra-long tube side strength
- Pre-installed inner axle seals
- HD forged inner knuckles with greater upper and lower section strength
- Ductile cast iron housing with increased rib gussets
- HD ductile iron differential cover
- Smooth radius bottom design to glide over rocks and obstacles
- Integrated lower control arm skid plates
- High-flow oil passages and bottom oil drain hole for simple fluid changes
- Reinforced front track bar mount (ties into spring pad) for greater strength
- UV protected triple-stage powder coat for corrosion resistance
- 1/4"-thick CNC laser cut axle brackets for extreme strength
- Integrated factory location upper control arm mount
- Pre-installed upper control arm bushings
- Proper pinion angle for lifted JK applications
- Pre-tapped hole on spring perch for bump stop extensions
- Pre-drilled holes for limit straps and lower spring retainers
- Retains all JK ESP, ABS, and speedometer sensor capability
- 100% engineered, designed, and built in the USA with new components
- California Residents: WARNING + View More Specs - View Less Specs
$4,794.99
On Backorder
Contact Us for Availability or Alternatives
LOW PRICE GUARANTEE
EASY RETURNS
Email me when this product comes in stock
LOW PRICE GUARANTEE
EASY RETURNS
TeraFlex Tera44 Rubicon HD Front Axle with 4.88 Gears & OEM Rubicon Locker - 3524488
Part #: TER3524488$4,794.99
On Backorder
Contact Us for Availability or Alternatives
Email me when this product comes in stock
LOW PRICE GUARANTEE
EASY RETURNS
- Fitment: Direct Fit
- JK Wrangler with up to 3 inch lift
- 4.88 gear ratio
- WMS-WMS: 65.5 inches wide
- 3.25 O.D x 0.5 inch wall extreme duty axle tube increases torsional strength to resist bending
- 5x5 bolt pattern
- Includes: OEM Rubicon locker, Spicer ring & pinion, Spicer bearings and install kits, TeraFlex HD ball joints and factory yoke
- Asymmetric housing design for extra-long tube side strength
- Pre-installed inner axle seals
- HD forged inner knuckles with greater upper and lower section strength
- Ductile cast iron housing with increased rib gussets
- HD ductile iron differential cover
- Smooth radius bottom design to glide over rocks and obstacles
- Integrated lower control arm skid plates
- High-flow oil passages and bottom oil drain hole for simple fluid changes
- Reinforced front track bar mount (ties into spring pad) for greater strength
- UV protected triple-stage powder coat for corrosion resistance
- 1/4"-thick CNC laser cut axle brackets for extreme strength
- Integrated factory location upper control arm mount
- Pre-installed upper control arm bushings
- Proper pinion angle for lifted JK applications
- Pre-tapped hole on spring perch for bump stop extensions
- Pre-drilled holes for limit straps and lower spring retainers
- Retains all JK ESP, ABS, and speedometer sensor capability
- 100% engineered, designed, and built in the USA with new components
- California Residents: WARNING + View More Specs - View Less Specs
4WP PROTECTION PLAN
Our Protection Plan covers your investment above and beyond the manufacturer's coverage. For only 10% more, if your item is damaged, fails or malfunctions, we'll replace it for free!
Sign In Or Create an Account
Reset Password
An email is sent to .
Enter email address to change your password
After you submit your email address, you'll receive an email a link that will let you change your password.
Choose Your Secure Checkout Method
Create An Account
Add to Wishlist
TeraFlex Tera44 Rubicon HD Front Axle with 5.13 Gears & OEM Rubicon Locker - 3524513
- Fitment: Direct Fit
- JK Wrangler with up to 3 inch lift
- 5.13 gear ratio
- WMS-WMS: 65.5 inches wide
- 3.25 O.D x 0.5 inch wall extreme duty axle tube increases torsional strength to resist bending
- 5x5 bolt pattern
- Includes: OEM Rubicon locker, Spicer ring & pinion, Spicer bearings and install kits, TeraFlex HD ball joints and factory yoke
- Asymmetric housing design for extra-long tube side strength
- Pre-installed inner axle seals
- HD forged inner knuckles with greater upper and lower section strength
- Ductile cast iron housing with increased rib gussets
- HD ductile iron differential cover
- Smooth radius bottom design to glide over rocks and obstacles
- Integrated lower control arm skid plates
- High-flow oil passages and bottom oil drain hole for simple fluid changes
- Reinforced front track bar mount (ties into spring pad) for greater strength
- UV protected triple-stage powder coat for corrosion resistance
- 1/4"-thick CNC laser cut axle brackets for extreme strength
- Integrated factory location upper control arm mount
- Pre-installed upper control arm bushings
- Proper pinion angle for lifted JK applications
- Pre-tapped hole on spring perch for bump stop extensions
- Pre-drilled holes for limit straps and lower spring retainers
- Retains all JK ESP, ABS, and speedometer sensor capability
- 100% engineered, designed, and built in the USA with new components
- California Residents: WARNING + View More Specs - View Less Specs
$4,794.99
On Backorder
Contact Us for Availability or Alternatives
LOW PRICE GUARANTEE
EASY RETURNS
Email me when this product comes in stock
LOW PRICE GUARANTEE
EASY RETURNS
TeraFlex Tera44 Rubicon HD Front Axle with 5.13 Gears & OEM Rubicon Locker - 3524513
Part #: TER3524513$4,794.99
On Backorder
Contact Us for Availability or Alternatives
Email me when this product comes in stock
LOW PRICE GUARANTEE
EASY RETURNS
- Fitment: Direct Fit
- JK Wrangler with up to 3 inch lift
- 5.13 gear ratio
- WMS-WMS: 65.5 inches wide
- 3.25 O.D x 0.5 inch wall extreme duty axle tube increases torsional strength to resist bending
- 5x5 bolt pattern
- Includes: OEM Rubicon locker, Spicer ring & pinion, Spicer bearings and install kits, TeraFlex HD ball joints and factory yoke
- Asymmetric housing design for extra-long tube side strength
- Pre-installed inner axle seals
- HD forged inner knuckles with greater upper and lower section strength
- Ductile cast iron housing with increased rib gussets
- HD ductile iron differential cover
- Smooth radius bottom design to glide over rocks and obstacles
- Integrated lower control arm skid plates
- High-flow oil passages and bottom oil drain hole for simple fluid changes
- Reinforced front track bar mount (ties into spring pad) for greater strength
- UV protected triple-stage powder coat for corrosion resistance
- 1/4"-thick CNC laser cut axle brackets for extreme strength
- Integrated factory location upper control arm mount
- Pre-installed upper control arm bushings
- Proper pinion angle for lifted JK applications
- Pre-tapped hole on spring perch for bump stop extensions
- Pre-drilled holes for limit straps and lower spring retainers
- Retains all JK ESP, ABS, and speedometer sensor capability
- 100% engineered, designed, and built in the USA with new components
- California Residents: WARNING + View More Specs - View Less Specs
4WP PROTECTION PLAN
Our Protection Plan covers your investment above and beyond the manufacturer's coverage. For only 10% more, if your item is damaged, fails or malfunctions, we'll replace it for free!
Sign In Or Create an Account
Reset Password
An email is sent to .
Enter email address to change your password
After you submit your email address, you'll receive an email a link that will let you change your password.
Choose Your Secure Checkout Method
Create An Account
Add to Wishlist
TeraFlex Tera44 Rubicon HD Front Axle with 5.38 Gears & OEM Rubicon Locker - 3524538
- Fitment: Direct Fit
- JK Wrangler with up to 3 inch lift
- 5.38 gear ratio
- WMS-WMS: 65.5 inches wide
- 3.25 O.D x 0.5 inch wall extreme duty axle tube increases torsional strength to resist bending
- 5x5 bolt pattern
- Includes: OEM Rubicon locker, Spicer ring & pinion, Spicer bearings and install kits, TeraFlex HD ball joints and factory yoke
- Asymmetric housing design for extra-long tube side strength
- Pre-installed inner axle seals
- HD forged inner knuckles with greater upper and lower section strength
- Ductile cast iron housing with increased rib gussets
- HD ductile iron differential cover
- Smooth radius bottom design to glide over rocks and obstacles
- Integrated lower control arm skid plates
- High-flow oil passages and bottom oil drain hole for simple fluid changes
- Reinforced front track bar mount (ties into spring pad) for greater strength
- UV protected triple-stage powder coat for corrosion resistance
- 1/4"-thick CNC laser cut axle brackets for extreme strength
- Integrated factory location upper control arm mount
- Pre-installed upper control arm bushings
- Proper pinion angle for lifted JK applications
- Pre-tapped hole on spring perch for bump stop extensions
- Pre-drilled holes for limit straps and lower spring retainers
- Retains all JK ESP, ABS, and speedometer sensor capability
- 100% engineered, designed, and built in the USA with new components
- California Residents: WARNING + View More Specs - View Less Specs
$4,794.99
On Backorder
Contact Us for Availability or Alternatives
LOW PRICE GUARANTEE
EASY RETURNS
Email me when this product comes in stock
LOW PRICE GUARANTEE
EASY RETURNS
TeraFlex Tera44 Rubicon HD Front Axle with 5.38 Gears & OEM Rubicon Locker - 3524538
Part #: TER3524538$4,794.99
On Backorder
Contact Us for Availability or Alternatives
Email me when this product comes in stock
LOW PRICE GUARANTEE
EASY RETURNS
- Fitment: Direct Fit
- JK Wrangler with up to 3 inch lift
- 5.38 gear ratio
- WMS-WMS: 65.5 inches wide
- 3.25 O.D x 0.5 inch wall extreme duty axle tube increases torsional strength to resist bending
- 5x5 bolt pattern
- Includes: OEM Rubicon locker, Spicer ring & pinion, Spicer bearings and install kits, TeraFlex HD ball joints and factory yoke
- Asymmetric housing design for extra-long tube side strength
- Pre-installed inner axle seals
- HD forged inner knuckles with greater upper and lower section strength
- Ductile cast iron housing with increased rib gussets
- HD ductile iron differential cover
- Smooth radius bottom design to glide over rocks and obstacles
- Integrated lower control arm skid plates
- High-flow oil passages and bottom oil drain hole for simple fluid changes
- Reinforced front track bar mount (ties into spring pad) for greater strength
- UV protected triple-stage powder coat for corrosion resistance
- 1/4"-thick CNC laser cut axle brackets for extreme strength
- Integrated factory location upper control arm mount
- Pre-installed upper control arm bushings
- Proper pinion angle for lifted JK applications
- Pre-tapped hole on spring perch for bump stop extensions
- Pre-drilled holes for limit straps and lower spring retainers
- Retains all JK ESP, ABS, and speedometer sensor capability
- 100% engineered, designed, and built in the USA with new components
- California Residents: WARNING + View More Specs - View Less Specs
4WP PROTECTION PLAN
Our Protection Plan covers your investment above and beyond the manufacturer's coverage. For only 10% more, if your item is damaged, fails or malfunctions, we'll replace it for free!
Sign In Or Create an Account
Reset Password
An email is sent to .
Enter email address to change your password
After you submit your email address, you'll receive an email a link that will let you change your password.
Choose Your Secure Checkout Method
Create An Account
Add to Wishlist
TeraFlex Tera44 HD Wide Front Axle with 4.88 Gears & ARB Air Locker - 35434884
- Fitment: Direct Fit
- JK Wrangler with up to 4-6 inch lift
- 4.88 gear ratio
- WMS-WMS: 70 inches wide
- 3.25 O.D x 0.5 inch wall extreme duty axle tube increases torsional strength to resist bending
- 5x5 bolt pattern
- Includes: ARB Air locker, Spicer ring & pinion, Spicer bearings and install kits, TeraFlex HD ball joints and factory yoke
- Asymmetric housing design for extra-long tube side strength
- Pre-installed inner axle seals
- HD forged inner knuckles with greater upper and lower section strength
- Ductile cast iron housing with increased rib gussets
- HD ductile iron differential cover
- Smooth radius bottom design to glide over rocks and obstacles
- Integrated lower control arm skid plates
- High-flow oil passages and bottom oil drain hole for simple fluid changes
- Reinforced front track bar mount (ties into spring pad) for greater strength
- UV protected triple-stage powder coat for corrosion resistance
- 1/4"-thick CNC laser cut axle brackets for extreme strength
- Integrated factory location upper control arm mount
- Pre-installed upper control arm bushings
- Proper pinion angle for lifted JK applications, 4-6" Lift features a raised pinion angle and raised track bar bracket
- Pre-tapped hole on spring perch for bump stop extensions
- Pre-drilled holes for limit straps and lower spring retainers
- Retains all JK ESP, ABS, and speedometer sensor capability
- 100% engineered, designed, and built in the USA with new components
- Note: This much lift REQUIRES adjustable control arms for caster angle adjustments
- Wide Axle Housings REQUIRE wider axle shafts.
- California Residents: WARNING + View More Specs - View Less Specs
$4,918.99
On Backorder
Contact Us for Availability or Alternatives
LOW PRICE GUARANTEE
EASY RETURNS
Email me when this product comes in stock
LOW PRICE GUARANTEE
EASY RETURNS
$4,918.99
On Backorder
Contact Us for Availability or Alternatives
Email me when this product comes in stock
LOW PRICE GUARANTEE
EASY RETURNS
- Fitment: Direct Fit
- JK Wrangler with up to 4-6 inch lift
- 4.88 gear ratio
- WMS-WMS: 70 inches wide
- 3.25 O.D x 0.5 inch wall extreme duty axle tube increases torsional strength to resist bending
- 5x5 bolt pattern
- Includes: ARB Air locker, Spicer ring & pinion, Spicer bearings and install kits, TeraFlex HD ball joints and factory yoke
- Asymmetric housing design for extra-long tube side strength
- Pre-installed inner axle seals
- HD forged inner knuckles with greater upper and lower section strength
- Ductile cast iron housing with increased rib gussets
- HD ductile iron differential cover
- Smooth radius bottom design to glide over rocks and obstacles
- Integrated lower control arm skid plates
- High-flow oil passages and bottom oil drain hole for simple fluid changes
- Reinforced front track bar mount (ties into spring pad) for greater strength
- UV protected triple-stage powder coat for corrosion resistance
- 1/4"-thick CNC laser cut axle brackets for extreme strength
- Integrated factory location upper control arm mount
- Pre-installed upper control arm bushings
- Proper pinion angle for lifted JK applications, 4-6" Lift features a raised pinion angle and raised track bar bracket
- Pre-tapped hole on spring perch for bump stop extensions
- Pre-drilled holes for limit straps and lower spring retainers
- Retains all JK ESP, ABS, and speedometer sensor capability
- 100% engineered, designed, and built in the USA with new components
- Note: This much lift REQUIRES adjustable control arms for caster angle adjustments
- Wide Axle Housings REQUIRE wider axle shafts.
- California Residents: WARNING + View More Specs - View Less Specs
4WP PROTECTION PLAN
Our Protection Plan covers your investment above and beyond the manufacturer's coverage. For only 10% more, if your item is damaged, fails or malfunctions, we'll replace it for free!
Sign In Or Create an Account
Reset Password
An email is sent to .
Enter email address to change your password
After you submit your email address, you'll receive an email a link that will let you change your password.
Choose Your Secure Checkout Method
Create An Account
Add to Wishlist
TeraFlex Tera44 Rubicon Replacement Front Axle Housing Assembly - 3544054
- Fitment: Direct Fit
- 2 and 4-door models
- Right hand drive models
- For Rubicon locker applications
- Front axle
- Direct bolt-in upgrade
- With .5 inch wall tube
- 1/2 inch axle tube
- California Residents: WARNING + View More Specs - View Less Specs
PROMOTIONS AUTOMATICALLY APPLIED
SHOP 4WP's HUGE SELECTION
$2,974.99
On Backorder
Contact Us for Availability or Alternatives
LOW PRICE GUARANTEE
EASY RETURNS
Email me when this product comes in stock
LOW PRICE GUARANTEE
EASY RETURNS
$2,974.99
On Backorder
Contact Us for Availability or Alternatives
Email me when this product comes in stock
LOW PRICE GUARANTEE
EASY RETURNS
- Fitment: Direct Fit
- 2 and 4-door models
- Right hand drive models
- For Rubicon locker applications
- Front axle
- Direct bolt-in upgrade
- With .5 inch wall tube
- 1/2 inch axle tube
- California Residents: WARNING + View More Specs - View Less Specs
PROMOTIONS AUTOMATICALLY APPLIED
SHOP 4WP's HUGE SELECTION
4WP PROTECTION PLAN
Our Protection Plan covers your investment above and beyond the manufacturer's coverage. For only 10% more, if your item is damaged, fails or malfunctions, we'll replace it for free!
Sign In Or Create an Account
Reset Password
An email is sent to .
Enter email address to change your password
After you submit your email address, you'll receive an email a link that will let you change your password.
Choose Your Secure Checkout Method
Create An Account
Add to Wishlist
TeraFlex Tera44 HD Front Axle with 4.10 Gears & ARB Air Locker - 3552410
- Fitment: Direct Fit
- JK Wrangler with up to 3 inch lift
- 4.10 gear ratio
- WMS-WMS: 65.5 inches
- 3.25 O.D x 0.5 inch wall extreme duty axle tube increases torsional strength to resist bending
- 5x5 bolt pattern
- Includes: ARB air locker, Spicer ring & pinion, Spicer bearings and install kits, TeraFlex HD ball joints and factory yoke
- Asymmetric housing design for extra-long tube side strength
- Pre-installed inner axle seals
- HD forged inner knuckles with greater upper and lower section strength
- Ductile cast iron housing with increased rib gussets
- HD ductile iron differential cover
- Smooth radius bottom design to glide over rocks and obstacles
- Integrated lower control arm skid plates
- High-flow oil passages and bottom oil drain hole for simple fluid changes
- Reinforced front track bar mount (ties into spring pad) for greater strength
- UV protected triple-stage powder coat for corrosion resistance
- 1/4"-thick CNC laser cut axle brackets for extreme strength
- Integrated factory location upper control arm mount
- Pre-installed upper control arm bushings
- Proper pinion angle for lifted JK applications
- Pre-tapped hole on spring perch for bump stop extensions
- Pre-drilled holes for limit straps and lower spring retainers
- Retains all JK ESP, ABS, and speedometer sensor capability
- 100% engineered, designed, and built in the USA with new components
- California Residents: WARNING + View More Specs - View Less Specs
$4,794.99
On Backorder
Contact Us for Availability or Alternatives
LOW PRICE GUARANTEE
EASY RETURNS
Email me when this product comes in stock
LOW PRICE GUARANTEE
EASY RETURNS
$4,794.99
On Backorder
Contact Us for Availability or Alternatives
Email me when this product comes in stock
LOW PRICE GUARANTEE
EASY RETURNS
- Fitment: Direct Fit
- JK Wrangler with up to 3 inch lift
- 4.10 gear ratio
- WMS-WMS: 65.5 inches
- 3.25 O.D x 0.5 inch wall extreme duty axle tube increases torsional strength to resist bending
- 5x5 bolt pattern
- Includes: ARB air locker, Spicer ring & pinion, Spicer bearings and install kits, TeraFlex HD ball joints and factory yoke
- Asymmetric housing design for extra-long tube side strength
- Pre-installed inner axle seals
- HD forged inner knuckles with greater upper and lower section strength
- Ductile cast iron housing with increased rib gussets
- HD ductile iron differential cover
- Smooth radius bottom design to glide over rocks and obstacles
- Integrated lower control arm skid plates
- High-flow oil passages and bottom oil drain hole for simple fluid changes
- Reinforced front track bar mount (ties into spring pad) for greater strength
- UV protected triple-stage powder coat for corrosion resistance
- 1/4"-thick CNC laser cut axle brackets for extreme strength
- Integrated factory location upper control arm mount
- Pre-installed upper control arm bushings
- Proper pinion angle for lifted JK applications
- Pre-tapped hole on spring perch for bump stop extensions
- Pre-drilled holes for limit straps and lower spring retainers
- Retains all JK ESP, ABS, and speedometer sensor capability
- 100% engineered, designed, and built in the USA with new components
- California Residents: WARNING + View More Specs - View Less Specs
