FOX 3.0 Factory Series Smooth Body Remote Reservoir Shocks

From $664.95

• Black and zinc finish
• Body diameter: 3.0 inch
• Shaft size: 7/8 inch diameter
• Sold Individually
• California Residents: WARNING

VIAIR Onboard Air Hookup Kits

From $133.99

• Kit includes a pressure switch, illuminated dash panel gauge with on/off switch, 20 ft. of air line and all necessary fittings
• California Residents: WARNING

VIAIR 325C 24V Compressor Kit

From $271.50

• 325C 24V Compressor Kit
• 24-volt
• Duty Cycle: 33% @ 100 PSI
• Max Working Pressure: 150 PSI
• Max Amp Draw: 12 Amps
• 1/4" NPT Intake Port
• Includes
• Vibration Isolators
• Mounting Hardware
• Remote mount air filter assembly
• Two replacement air filter elements
• Stainless steel braided leader hose with Check Valve
• California Residents: WARNING

VIAIR Fittings, Couplers, Connects, Valves, Adaptors, Reducers, Etc.

From $10.99

• VIAIR 5-Piece Tank Port Fitting Kits are available for 200 PSI and 150 PSI rated systems
• The Tank Port Fitting Kits offer quick connect studs and couplers for your air hoses and lines
• The durable brass construction insures years of dependability
• All fittings are NPT threaded and thread sealant is recommended for proper installation
• California Residents: WARNING

VIAIR Inline Pressure Regulator with Mounting Brackets

From $47.99

• VIAIR Inline Pressure Regulator with Mounting Brackets are used to regulate air pressure from an air tank to any pressure between 0-220 PSI
• The pressure regulator is useful for installations that supply air to locking differentials, & air tools
• The VIAIR Inline Pressure Regulator also provides an easy-to-read gauge that allows adjustment of inline pressure, a 1/4? NPT compression fitting for tank pressure side and a t-fitting that will allow regulated pressure to be fed to two locations
• California Residents: WARNING

FOX 2.0 Performance Series Coilover IFP Shocks

From $199.95

• 2.0" Metal impacted 6061-T6 aluminum will resist rust over time
• Clear-anodized for a durable finish
• Internal IFP mono-tube reservoir design separates shock oil from the high-pressure nitrogen
• Black-anodized, CNC-machined 6061-T6 billet aluminum
• 5/8" hard chrome plated heat-treated alloy steel shaft
• Race-developed high-flow piston design
• Application specific valving to maximize performance
• Redundant sealing pack system main seal, wiper seal, scraper seal
• JM92 Advanced Suspension Fluid for improved performance at variable temperatures
• Large diameter, heavy-duty spherical bearing
• Direct replacement for stock and aftermarket lifts kits
• Ride height preload ring
• California Residents: WARNING

FOX 2.0 Performance Series Steering Stabilizers

From $118.97

FOX 2.0 Performance Series Reservoir Shocks

From $269.95

• 2.0" Metal impacted 6061-T6 aluminum will resist rust over time
• Clear-anodized for a durable finish
• 2.0" Smooth bore 6061-T6 Aluminum is hard anodized
• Black-anodized, CNC-machined 6061-T6 billet aluminum
• 5/8" hard chrome plated heat-treated alloy steel shaft
• Race-developed high-flow piston design
• Application specific valving to maximize performance
• Redundant sealing pack system main seal, wiper seal, scraper seal
• JM92 Advanced Suspension Fluid for improved performance at variable temperatures
• Quiet nitrile rubber allows for increased suspension articulation
• Direct replacement for stock and aftermarket lifts kits
• California Residents: WARNING

FOX 2.5 Factory Race Series Coilover Shocks

From $1,149.95

• Smooth bore and honed seamless steel body
• Zinc plated for a long-lasting finish
• Black anodized, CNC machined 6061-T6 billet aluminum
• 7075 hard-anodized high-flow aluminum piston
• Tunable, velocity sensitive deburred valve shims
• Reusable ORB O-ring port hose fittings for superior seal with remote reservoirs
• High-temp Viton® redundant sealing pack system with main seal, wiper seal and scraper seal
• JM92 Advanced Suspension Fluid for improved performance at variable temperatures
• 7/8" 17-4 H900 hard chrome plated stainless steel, hard chrome plated
• Spherical, PFTE-lined, heat-treated alloy steel bearing
• California Residents: WARNING

FOX 2.5 Factory Race Series Reservoir Shock Sets

From $1,149.95

• 2.5" Smooth bore and honed seamless alloy body
• Zinc-plated and double-clear coated for long lasting finish
• 2.5" Smooth bore and honed seamless alloy reservoir
• Black-anodized, CNC-machined 6061-T6 billet aluminum
• 7/8" hard chrome plated heat-treated alloy steel
• Race-developed high-flow piston design
• Application specific valving to maximize performance
• Redundant sealing pack system main seal, wiper seal, scraper seal
• JM92 Advanced Suspension Fluid for improved performance at variable temperatures
• PTFE-lined, heat-treated, alloy steel spherical bearing
• Direct replacement for stock and aftermarket lifts kits
• California Residents: WARNING

FOX 2.5 Factory Race Series Coilover IFP Shock Sets

From $1,499.95

• 2.5" Smooth bore and honed seamless alloy bodies
• Zinc-plated and double-clear coated for long lasting finish
• Internal IFP mono-tube reservoir design separates shock oil from the high-pressure nitrogen
• Black-anodized, CNC-machined 6061-T6 billet aluminum
• Application specific, adjustable 3.0 Eibach® racing springs
• 7/8" hardened NitroSteel® Steel carbon shafts
• 6061-T6 hard-anodized, high flow aluminum piston
• Application specific valving to maximize performance
• Redundant sealing pack system main seal, wiper seal, scraper seal
• JM92 Advanced Suspension Fluid for improved performance at variable temperatures
• PTFE-lined, heat-treated, alloy steel spherical bearing
• Direct replacement for stock and aftermarket lifts kits
• Ride height preload ring
• California Residents: WARNING

FOX 2.0 Factory Race Series Reservior Shocks

From $234.95

• 2.0" Smooth bore and honed seamless alloy bodies
• Zinc-plated and double-clear coated for long lasting finish
• 2.0" Smooth bore 6061-T6 Aluminum is hard anodized black reservoir
• 5/8" hard chrome plated heat-treated alloy steel shaft
• Race-developed high-flow piston design piston
• Application specific valving to maximize performance
• Redundant sealing pack system main seal, wiper seal, scraper seal
• JM92 Advanced Suspension Fluid for improved performance at variable temperatures
• Quiet nitrile rubber allows for increased suspension articulation
• Direct replacement for stock and aftermarket lifts kits
• California Residents: WARNING

FOX 2.0 Factory Race Series Coilover Shocks

From $289.95

• Smooth bore and honed seamless steel
• Zinc plated for a long-lasting finish
• Black anodized, CNC machined 6061-T6 billet aluminum
• Tunable, velocity sensitive deburred valve shims
• Reusable ORB O-ring port hose fittings for superior seal with remote reservoirs
• High-temp Viton® redundant sealing pack system with main seal, wiper seal and scraper seal
• JM92 Advanced Suspension Fluid for improved performance at variable temperatures
• Spherical, PFTE-lined, heat-treated alloy steel
• California Residents: WARNING

FOX 2.0 Factory Race Series ATS Steering Stabilizers

From $469.95

FOX 2.0 Performance Series IFP Shocks

From $111.97

• 2.0" Metal impacted 6061-T6 aluminum will resist rust over time
• Clear-anodized for a durable finish
• Internal IFP mono-tube reservoir design separates shock oil from the high-pressure nitrogen
• Black-anodized, CNC-machined 6061-T6 billet aluminum
• 5/8" hard chrome plated heat-treated alloy steel shaft
• Race-developed high-flow piston design
• Application specific valving to maximize performance
• Redundant sealing pack system main seal, wiper seal, scraper seal
• JM92 Advanced Suspension Fluid for improved performance at variable temperatures
• Quiet nitrile rubber allows for increased suspension articulation
• Direct replacement for stock and aftermarket lifts kits
• California Residents: WARNING

FOX Factory Race Series GEN2 2.0 IFP Bump Stops

From $399.95

• Sold as a pair
• Black anodized, CNC machined 6061-T6 billet aluminum body
• Black anodized, CNC machined 6061-T6 billet aluminum
• Replaceable Delrin® strike pad
• Hard chrome plated 1-1/4" 4130 steel with Internal Floating Piston (IFP) for increased damping performance
• Heavy-duty powdered steel piston
• Tunable, velocity sensitive deburred valve shims
• Redundant sealing pack system, main seal, wiper seal, scraper seal
• JM92 Advanced Suspension Fluid for improved performance at variable temperatures
• Nitrogen pressure adjustments

FOX 2.5 Performance Series Coilover Shocks

From $509.95

• Smooth bore and honed seamless steel body
• Zinc plated for a long-lasting finish
• Black anodized, CNC machined 6061-T6 billet aluminum
• Application specific adjustable 3.0" racing spring
• Race developed high flow design
• Tunable, velocity sensitive deburred valve shims
• Redundant sealing pack system, main seal, wiper seal, scraper seal
• JM92 Advanced Suspension Fluid for improved performance at variable temperatures
• 7/8" hard chrome plated, heat-treated alloy steel
• Spherical, PFTE-lined, heat-treated alloy steel bearing
• California Residents: WARNING

FOX 2.5 Factory Race Series Coilover Reservoir Shocks

From $1,009.95

• 2.5" Smooth bore and honed seamless alloy body
• Zinc-plated and double-clear coated for long lasting finish
• 2.5" Smooth bore and honed seamless alloy reservoir
• Black-anodized, CNC-machined 6061-T6 billet aluminum
• Application specific, adjustable 3.0 Eibach® racing springs
• 7/8" hard chrome plated steel shafts
• 6061-T6 hard-anodized, high flow aluminum piston
• Application specific valving to maximize performance
• Redundant sealing pack system main seal, wiper seal, scraper seal
• JM92 Advanced Suspension Fluid for improved performance at variable temperatures
• PTFE-lined, heat-treated, alloy steel spherical bearing
• Direct replacement for stock and aftermarket lifts kits
• Ride height preload ring
• California Residents: WARNING

FOX 4.4 Factory Race Series External Bypass Shocks

From $2,449.95

• Smooth bore and honed seamless steel body
• Zinc plated for a long-lasting finish
• Black anodized, CNC machined 6061-T6 billet aluminum
• Stainless steel for improved performance at high temperatures
• Tunable, velocity sensitive deburred valve shims
• High-temp Viton® redundant sealing pack system with main seal, wiper seal and scraper seal
• JM92 Advanced Suspension Fluid for improved performance at variable temperatures
• 17-4 H900 hard chrome plated stainless steel
• Spherical, PFTE-lined, heat-treated alloy steel bearing
• California Residents: WARNING

FOX 4.0 Factory Race Series External Bypass Shocks

From $2,219.95

• Smooth bore and honed seamless steel body
• Zinc plated for a long-lasting finish
• Black anodized, CNC machined 6061-T6 billet aluminum
• Stainless steel for improved performance at high temperatures
• Tunable, velocity sensitive deburred valve shims
• High-temp Viton® redundant sealing pack system with main seal, wiper seal and scraper seal
• JM92 Advanced Suspension Fluid for improved performance at variable temperatures
• 17-4 H900 hard chrome plated stainless steel
• Spherical, PFTE-lined, heat-treated alloy steel bearing
• California Residents: WARNING

FOX 3.5 Factory Race Series External Bypass Shocks

From $1,839.95

• Smooth bore and honed seamless steel body
• Zinc plated for a long-lasting finish
• Black anodized, CNC machined 6061-T6 billet aluminum
• Stainless steel for improved performance at high temperatures
• Tunable, velocity sensitive deburred valve shims
• High-temp Viton® redundant sealing pack system with main seal, wiper seal and scraper seal
• JM92 Advanced Suspension Fluid for improved performance at variable temperatures
• 17-4 H900 hard chrome plated stainless steel
• Spherical, PFTE-lined, heat-treated alloy steel bearing
• California Residents: WARNING

FOX 3.0 Series Bypass Piggyback Reservoir Shocks

From $1,299.95

FOX 2.5 Factory Race Series Reservoir Shocks

From $1,349.95

• 2.5" Smooth bore and honed seamless alloy body
• Zinc-plated and double-clear coated for long lasting finish
• 2.5" Smooth bore and honed seamless alloy reservoir
• Black-anodized, CNC-machined 6061-T6 billet aluminum
• 7/8" hard chrome plated heat-treated alloy steel
• Race-developed high-flow piston design
• Application specific valving to maximize performance
• Redundant sealing pack system main seal, wiper seal, scraper seal
• JM92 Advanced Suspension Fluid for improved performance at variable temperatures
• PTFE-lined, heat-treated, alloy steel spherical bearing
• Direct replacement for stock and aftermarket lifts kits
• California Residents: WARNING

FOX 2.5 Factory Race Series External Bypass Shocks

From $1,014.95

• Smooth bore and honed seamless steel body
• Zinc plated for a long-lasting finish
• Black anodized, CNC machined 6061-T6 billet aluminum components
• Stainless steel for improved performance at high temperatures
• Tunable, velocity sensitive deburred valve shims
• High-temp Viton® redundant sealing pack system with main seal, wiper seal and scraper seal
• JM92 Advanced Suspension Fluid for improved performance at variable temperatures
• 17-4 H900 hard chrome plated stainless steel shaft
• Spherical, PFTE-lined, heat-treated alloy steel bearing
• California Residents: WARNING