Welcome Guest
SHOP BY CATEGORY
SHOP BY BRAND
SHOP BY VEHICLE
Sales Support 877-474-4821
877-260-5452
Call Our Stateside Experts!
Flex-A-Lite/Synergy Manufacturing Flex-A-Lite
Flex-A-Lite/Synergy Manufacturing On Sale
80 Product Groups
Switch to View Products
Flex-A-Lite Belt-Driven Flex Fans
Flex-A-Lite 1300 Series Belt-Driven Flex FanFrom $101.99
- 1300 Series
- Belt-Driven Flex Fan
- Red Star/Stainless Steel Blades
- Fan Rotation CW
- California Residents: WARNING
From $101.99
5.0
5.0
(2)
Synergy Manufacturing Front Long Arm Lower Control Arm
Synergy Manufacturing Front Long Arm Lower Control ArmFrom $575.00
From $575.00
Synergy Manufacturing Rear Stretch Bracket Kit
Synergy Manufacturing Rear Stretch Bracket KitFrom $1,480.00
- Synergy Manufacturing Rear Stretch Bracket Kit allows 2 Door JK's to be stretched with the Synergy 8 inch stretch kit while retaining the factory style coil spring and shock setup
- The Rear Stretch Bracket Kit Relocates upper coil spring mounts and upper shock mounts back 8 inches
- The Synergy Manufacturing Rear Stretch Bracket Kit is designed to be used in conjunction with Synergy 8032 rear 8 inch stretch brackets and long arms
- California Residents: WARNING
From $1,480.00
Synergy Lift Coil Springs
Synergy Lift Coil SpringsFrom $260.00
- Lift coil springs
- Synergy coils offer excellent off road performance while preserving ride quality
- Progressively wound
- keeps spring from coming unbound at suspension droop
- Progressively wound spring eliminates annoying spring clanking found on most suspension kits
- Feature frequency balanced and tuned spring rates to maximize suspension performance on and off road
- Suspension components feature an abrasive-resistant black powder coat finish for maximum durability and corrosion resistance
- Springs are designed to give the advertised amount of lift with use of aftermarket front bumpers & winches
- Sold in a pair
- California Residents: WARNING
From $260.00
4.9
4.9
(7)
Synergy Manufacturing Axle Trusses
Synergy Manufacturing Axle TrussesFrom $200.00
- Open top for easy upper link installation
- Rigid, boxed design made from 3/16" laser cut steel plate
- Designed to be used for 4 link suspensions
- Fits most differentials, D35, 44, 60, Ford 8.8", 9.0" & Chevy 14 bolt housings
- Link mount brackets are angled at 50 degrees apart from each other
- California Residents: WARNING
From $200.00
Flex-A-Lite Mojave Heaters
Flex-A-Lite Mojave HeaterFrom $436.99
- Includes switch, switch plate and wiring harness
- Dimensions: 10-1/8 inch wide by 9 inch deep and 5 inch high
- Uses coolant lines
- California Residents: WARNING
From $436.99
Flex-A-Lite Transmission Oil Cooler Installation Kit
Flex-A-Lite Transmission Oil Cooler Installation KitFrom $16.99
- Tranny Cooler Installation Kit
- Incl. 4 Sets Of Nylon Bolts/Washers/Push-Nuts/Rubber Spacers/4 Hose Clamps/2 Radiator Adapter Fittings
- California Residents: WARNING
From $16.99
Synergy Manufacturing Control Arm Cam Bolt Kit
Synergy Manufacturing Control Arm Cam Bolt KitFrom $45.00
- Synergy 9/16" Control Arm Cam Bolt Kit
- Cam bolts are manufactured from high carbon heat treated steel
- All included components are zinc plated for maximum corrosion resistance
- 100% bolt on components assures an easy, trouble free installation with the use of basic hand tools
- Cam bolt offers 1/2" adjustment in either direction
- The bolt will work on a mounting width of 2.25 - 3"
- California Residents: WARNING
From $45.00
Synergy Manufacturing Side Plate Mounting Kit (Arms Only)
Synergy Manufacturing Side Plate Mounting Kit (Arms Only)From $75.00
- (2) Side Plate Mounting Arms only
- Jeep JK, 4 Door
- Made in the USA
- California Residents: WARNING
From $75.00
Synergy Manufacturing Rear Track Bar Brackets
Synergy Manufacturing Rear Track Bar BracketFrom $100.00
- Bracket raises the vehicle's axle side track bar mount
- The vehicle's rollcenter is raised, reducing body roll and dramatically improving overall handling
- Special bolt on design strengthens the factory mount that is prone to failure
- Laser cut from 3/16" steel & 2 stage powdercoat finish for maximum strength and durability
- Suspension components feature an abrasive resistant powder coat finish for maximum durability and corrosion resistance
- California Residents: WARNING
From $100.00
Flex-A-Lite Fan Spacer Kits
Flex-A-Lite Fan Spacer KitsFrom $119.99
- Belt-Driven Fan Spacer Adapters
- California Residents: WARNING
From $119.99
Synergy Manufacturing Axle Bracket Kit
Synergy Manufacturing Axle Bracket KitFrom $175.00
- Front and Rear applications
- Various mounts included
- Made in the USA
- California Residents: WARNING
From $175.00
5.0
5.0
(3)
Flex-A-Lite Stock Replacement Fans
Flex-A-Lite Stock Replacement FansFrom $75.99
- Flex-a-lite O.E. Replacement fans are a good choice when the original fan is damaged
- Standard rotation
- Steel star with aluminum blades
- Dual clutch pattern
- California Residents: WARNING
From $75.99
Flex-A-Lite Belt-Driven Race Fan
Flex-A-Lite Belt-Driven Race FanFrom $43.99
- Belt-Driven Race Fan
- Steel Blades
- Made in the USA
- California Residents: WARNING
From $43.99
4.0
4.0
(5)
Flex-A-Lite Electric Fan Blade Kit
Flex-A-Lite Electric Fan Blade KitFrom $101.99
- Electric Fan Blade Kit
- Replacement Blade For Electric Fan
- California Residents: WARNING
From $101.99
4.0
4.0
(6)
Flex-A-Lite Transmission Oil Cooler Remount Kit
Flex-A-Lite Transmission Oil Cooler Remount KitFrom $13.99
- Tranny Cooler Remount Kit
- Incl. 4 Sets Of Nylon Bolts/Washers/Push-Nuts/Rubber Spacers
- California Residents: WARNING
From $13.99
Flex-A-Lite Speed Sensor
Flex-A-Lite Speed SensorFrom $38.99
- Speed Sensor
- Screw In
- Use w/ Variable Speed Control Kit
- w/ Adaptor
- California Residents: WARNING
From $38.99
Flex-A-Lite Temperature Sensor
Flex-A-Lite Temperature SensorFrom $30.99
- Temperature Sensor
- Silver Probe
- California Residents: WARNING
From $30.99
Synergy Manufacturing Dodge Front Lower Control Arm
Synergy Manufacturing Dodge Front Lower Control ArmFrom $550.00
From $550.00
Flex-A-Lite Universal Fit Flex-A-Fit Radiators
Flex-A-Lite Flex-A-Fit RadiatorFrom $1,499.99
- Flex-A-Fit
- Radiator
- Aluminum
- California Residents: WARNING
From $1,499.99
Synergy Manufacturing 2 Inch Front Bump Stop Spacer Kits
Synergy Manufacturing 2 inch Front Bump Stop Spacer KitFrom $85.00
- Synergy Jeep JK, TJ, XJ, ZJ Front Bump Stop Spacer Kit
- Manufactured from high grade 6061 Billet Aluminum material
- Hard anodized finish eliminates oxidation that can occur under extreme elements
- Bump Stops fit inside front coils and provide 2", 3", and 4" of extra limitation for larger tires
- 100% bolt on components assures an easy, trouble free installation with the use of basic hand tools
- California Residents: WARNING
From $85.00
4.6
4.6
(10)
Synergy Manufacturing TRE Adapter
Synergy Manufacturing TRE AdapterFrom $40.00
- Adapter is designed to flip the taper on the steering knuckle
- CNC machined from 303 stainless steel
- Sold Individually
- Made in the USA
- California Residents: WARNING
From $40.00
Flex-A-Lite Electric Fan Motor
Flex-A-Lite Electric Fan MotorFrom $111.99
- Electric Fan Motor
- Replacement For Electric Fan
- Made in the USA
- California Residents: WARNING
From $111.99
Flex-A-Lite 400 Series Nylon Flex Fan
Flex-A-Lite 400 Series Nylon Flex FanFrom $52.99
- 400 Series
- Nylon Flex Fan
- Black
- Requires spacer
- Ideal for race or performance applications
- Fan Rotation CW
- California Residents: WARNING
From $52.99
405 Products
Switch to View Product Groups
4WP PROTECTION PLAN
Our Protection Plan covers your investment above and beyond the manufacturer's coverage. For only 10% more, if your item is damaged, fails or malfunctions, we'll replace it for free!
Sign In Or Create an Account
Reset Password
An email is sent to .
Enter email address to change your password
After you submit your email address, you'll receive an email a link that will let you change your password.
Choose Your Secure Checkout Method
Create An Account
Add to Wishlist
Synergy Hub Centric Wheel Spacers - 8810-02
How to Get it
Free! Curbside & In-Store Pickup: Select A Store Near You
Ship to Home:
In-Stock Ships today ?- Fitment: Direct Fit
- Synergy wheel spacers
- Width: 1 3/4"
- Wheel Stud Size: M14 x 1.50
- Wheel hub centric for increased strength
- CNC machined from billet 6061-T6 aluminum
- Features corrosion resistant red anodizing
- High grade wheel studs and lug nuts
- Can be used with factory or after market wheels
- Includes Loctite
- Sold as a pair
- California Residents: WARNING + View More Specs - View Less Specs
PROMOTIONS AUTOMATICALLY APPLIED
Lowest Price! Guaranteed!
Qualifies for Free Shipping
$110.00
In-Stock Ships today ?
$110.00
In-Stock Ships today
?
LOW PRICE GUARANTEE
EASY RETURNS
How to Get it
Free! Curbside & In-Store Pickup: Select A Store Near You
Ship to Home:
In-Stock Ships today ?- Fitment: Direct Fit
- Synergy wheel spacers
- Width: 1 3/4"
- Wheel Stud Size: M14 x 1.50
- Wheel hub centric for increased strength
- CNC machined from billet 6061-T6 aluminum
- Features corrosion resistant red anodizing
- High grade wheel studs and lug nuts
- Can be used with factory or after market wheels
- Includes Loctite
- Sold as a pair
- California Residents: WARNING + View More Specs - View Less Specs
PROMOTIONS AUTOMATICALLY APPLIED
Lowest Price! Guaranteed!
Qualifies for Free Shipping
4WP PROTECTION PLAN
Our Protection Plan covers your investment above and beyond the manufacturer's coverage. For only 10% more, if your item is damaged, fails or malfunctions, we'll replace it for free!
Sign In Or Create an Account
Reset Password
An email is sent to .
Enter email address to change your password
After you submit your email address, you'll receive an email a link that will let you change your password.
Choose Your Secure Checkout Method
Create An Account
Add to Wishlist
Synergy Manufacturing Heavy-Duty Drag Link - 8701-01
- Fitment: Direct Fit
- Ram 2500
- 13-Current Ram 3500
- Min collapsed length: 39.13 inches
- Max extended length: 41.50 inches
- CNC formed from 1.75 inch x .188 wall seamless chromoly tubing and heat treated after forming
- Improves strength and steering feel and eliminates any chance of bending
- Offers a more direct connection to the road compared to stock
- no more bent drag links and constantly having to align your vehicle
- Synergy Heavy Duty Metal on Metal Tie Rod Ends are stronger and more durable than stock
- Includes grease fittings/replaceable dust boots for ease of maintenance
- Synergy High Performance Grease recommended (4119)
- Eliminates unwanted drag link flop
- Drag Link length adjustable on the vehicle
- Compatible with stock wheels and tires
- California Residents: WARNING + View More Specs - View Less Specs
PROMOTIONS AUTOMATICALLY APPLIED
Lowest Price! Guaranteed!
Qualifies for Free Shipping
$500.00
On Backorder
Contact Us for Availability or Alternatives
LOW PRICE GUARANTEE
EASY RETURNS
Email me when this product comes in stock
LOW PRICE GUARANTEE
EASY RETURNS
$500.00
On Backorder
Contact Us for Availability or Alternatives
Email me when this product comes in stock
LOW PRICE GUARANTEE
EASY RETURNS
- Fitment: Direct Fit
- Ram 2500
- 13-Current Ram 3500
- Min collapsed length: 39.13 inches
- Max extended length: 41.50 inches
- CNC formed from 1.75 inch x .188 wall seamless chromoly tubing and heat treated after forming
- Improves strength and steering feel and eliminates any chance of bending
- Offers a more direct connection to the road compared to stock
- no more bent drag links and constantly having to align your vehicle
- Synergy Heavy Duty Metal on Metal Tie Rod Ends are stronger and more durable than stock
- Includes grease fittings/replaceable dust boots for ease of maintenance
- Synergy High Performance Grease recommended (4119)
- Eliminates unwanted drag link flop
- Drag Link length adjustable on the vehicle
- Compatible with stock wheels and tires
- California Residents: WARNING + View More Specs - View Less Specs
PROMOTIONS AUTOMATICALLY APPLIED
Lowest Price! Guaranteed!
Qualifies for Free Shipping
4WP PROTECTION PLAN
Our Protection Plan covers your investment above and beyond the manufacturer's coverage. For only 10% more, if your item is damaged, fails or malfunctions, we'll replace it for free!
Sign In Or Create an Account
Reset Password
An email is sent to .
Enter email address to change your password
After you submit your email address, you'll receive an email a link that will let you change your password.
Choose Your Secure Checkout Method
Create An Account
Add to Wishlist
Synergy Manufacturing Ram Adjustable Track Bar - 8550-11
How to Get it
Free! Curbside & In-Store Pickup: Select A Store Near You
Ship to Home:
In-Stock Ships today ?- Fitment: Direct Fit
- 03-13 Dodge Ram 2500 4x4, 03-12 Dodge Ram 3500 4x4, 06-08 Dodge Ram 1500 Megacab 4x4
- Front track bar
- Bent to clear most aftermarket differential covers
- Retains factory track bar mounting bolts & hardware
- Made from high quality 1.5" x .250" wall DOM tubing
- Allows centering of front axle when running a suspension lift
- Suspension components feature an abrasion-resistant powder coat finish for maximum durability and corrosion resistance
- Synergy double adjuster sleeve & pinch bolt assembly allows for adjustment of track bar length without removing control arm mounting bolt
- Features Synergy Dual Durometer Bushings (DDB) with Teflon bearing surface for a maintenance free design focusing on performance, flex, longevity, and ride quality
- 100% bolt on components assures an easy, trouble free installation with the use of basic hand tools
- California Residents: WARNING + View More Specs - View Less Specs
PROMOTIONS AUTOMATICALLY APPLIED
Lowest Price! Guaranteed!
Qualifies for Free Shipping
$400.00
In-Stock Ships today ?
$400.00
In-Stock Ships today
?
LOW PRICE GUARANTEE
EASY RETURNS
How to Get it
Free! Curbside & In-Store Pickup: Select A Store Near You
Ship to Home:
In-Stock Ships today ?- Fitment: Direct Fit
- 03-13 Dodge Ram 2500 4x4, 03-12 Dodge Ram 3500 4x4, 06-08 Dodge Ram 1500 Megacab 4x4
- Front track bar
- Bent to clear most aftermarket differential covers
- Retains factory track bar mounting bolts & hardware
- Made from high quality 1.5" x .250" wall DOM tubing
- Allows centering of front axle when running a suspension lift
- Suspension components feature an abrasion-resistant powder coat finish for maximum durability and corrosion resistance
- Synergy double adjuster sleeve & pinch bolt assembly allows for adjustment of track bar length without removing control arm mounting bolt
- Features Synergy Dual Durometer Bushings (DDB) with Teflon bearing surface for a maintenance free design focusing on performance, flex, longevity, and ride quality
- 100% bolt on components assures an easy, trouble free installation with the use of basic hand tools
- California Residents: WARNING + View More Specs - View Less Specs
PROMOTIONS AUTOMATICALLY APPLIED
Lowest Price! Guaranteed!
Qualifies for Free Shipping
4WP PROTECTION PLAN
Our Protection Plan covers your investment above and beyond the manufacturer's coverage. For only 10% more, if your item is damaged, fails or malfunctions, we'll replace it for free!
Sign In Or Create an Account
Reset Password
An email is sent to .
Enter email address to change your password
After you submit your email address, you'll receive an email a link that will let you change your password.
Choose Your Secure Checkout Method
Create An Account
Add to Wishlist
Synergy Manufacturing Heavy-Duty Tie Rod - 8702-01
How to Get it
Free! Curbside & In-Store Pickup: Select A Store Near You
Ship to Home:
In-Stock Ships today ?- Fitment: Direct Fit
- Ram 2500
- 13-Current Ram 3500
- Over 40% stronger than the stock tie rod
- Bolts right into the factory mounts with no additional wheel requirements
- Improves strength and steering feel and eliminates any chance of bending
- Offers a more direct connection to the road compared to stock
- No more bent tie rods and constantly having to align your vehicle
- Synergy Heavy Duty Metal on Metal Tie Rod Ends are stronger and more durable than stock
- Includes grease fittings/replaceable dust boots for ease of maintenance
- Synergy High Performance Grease recommended (4119)
- Eliminates unwanted tie rod flop and the steering deadspot commonly encountered with hydro assist setups
- Tie rod length adjustable on the vehicle
- Compatible with stock wheels and tires
- California Residents: WARNING + View More Specs - View Less Specs
PROMOTIONS AUTOMATICALLY APPLIED
Lowest Price! Guaranteed!
Qualifies for Free Shipping
$600.00
In-Stock Ships today ?
$600.00
In-Stock Ships today
?
LOW PRICE GUARANTEE
EASY RETURNS
How to Get it
Free! Curbside & In-Store Pickup: Select A Store Near You
Ship to Home:
In-Stock Ships today ?- Fitment: Direct Fit
- Ram 2500
- 13-Current Ram 3500
- Over 40% stronger than the stock tie rod
- Bolts right into the factory mounts with no additional wheel requirements
- Improves strength and steering feel and eliminates any chance of bending
- Offers a more direct connection to the road compared to stock
- No more bent tie rods and constantly having to align your vehicle
- Synergy Heavy Duty Metal on Metal Tie Rod Ends are stronger and more durable than stock
- Includes grease fittings/replaceable dust boots for ease of maintenance
- Synergy High Performance Grease recommended (4119)
- Eliminates unwanted tie rod flop and the steering deadspot commonly encountered with hydro assist setups
- Tie rod length adjustable on the vehicle
- Compatible with stock wheels and tires
- California Residents: WARNING + View More Specs - View Less Specs
PROMOTIONS AUTOMATICALLY APPLIED
Lowest Price! Guaranteed!
Qualifies for Free Shipping
4WP PROTECTION PLAN
Our Protection Plan covers your investment above and beyond the manufacturer's coverage. For only 10% more, if your item is damaged, fails or malfunctions, we'll replace it for free!
Sign In Or Create an Account
Reset Password
An email is sent to .
Enter email address to change your password
After you submit your email address, you'll receive an email a link that will let you change your password.
Choose Your Secure Checkout Method
Create An Account
Add to Wishlist
Part Number: SYN4112-5-45-50-H
Synergy Manufacturing Wheel Spacers - 4112-5-45-50-H
How to Get it
Free! Curbside & In-Store Pickup: Select A Store Near You
Ship to Home:
Only 1 left in Stock ?- Fitment: Universal Fit
- 5x4.5 to 5x5 Bolt Pattern
- 1.50 inch thick
- Wheel hub centric for increased strength
- CNC Machined from billet 6061-T6 aluminum
- Features corrosion resistant red anodizing
- High grade wheel studs and lug nuts
- Can be used with factory or after market wheels
- Includes Loctite
- Sold As A Pair
- Made in the U.S.A
- California Residents: WARNING + View More Specs - View Less Specs
PROMOTIONS AUTOMATICALLY APPLIED
Lowest Price! Guaranteed!
Qualifies for Free Shipping
$110.00
Only 1 left in Stock ?
$110.00
Only 1 left in Stock
?
LOW PRICE GUARANTEE
EASY RETURNS
How to Get it
Free! Curbside & In-Store Pickup: Select A Store Near You
Ship to Home:
Only 1 left in Stock ?- Fitment: Universal Fit
- 5x4.5 to 5x5 Bolt Pattern
- 1.50 inch thick
- Wheel hub centric for increased strength
- CNC Machined from billet 6061-T6 aluminum
- Features corrosion resistant red anodizing
- High grade wheel studs and lug nuts
- Can be used with factory or after market wheels
- Includes Loctite
- Sold As A Pair
- Made in the U.S.A
- California Residents: WARNING + View More Specs - View Less Specs
PROMOTIONS AUTOMATICALLY APPLIED
Lowest Price! Guaranteed!
Qualifies for Free Shipping
4WP PROTECTION PLAN
Our Protection Plan covers your investment above and beyond the manufacturer's coverage. For only 10% more, if your item is damaged, fails or malfunctions, we'll replace it for free!
Sign In Or Create an Account
Reset Password
An email is sent to .
Enter email address to change your password
After you submit your email address, you'll receive an email a link that will let you change your password.
Choose Your Secure Checkout Method
Create An Account
Add to Wishlist
Synergy Manufacturing Hub Centric Wheel Spacers - 4112-5-45-H
How to Get it
Free! Curbside & In-Store Pickup: Select A Store Near You
Ship to Home:
Only 1 left in Stock ?- Fitment: Universal Fit
- 5x4.5 Bolt Pattern
- Wheel hub centric for increased strength
- 1.50 inch thick
- CNC Machined from billet 6061-T6 aluminum
- Features corrosion resistant red anodizing
- High grade wheel studs and lug nuts
- Can be used with factory or after market wheels
- Includes Loctite
- Sold as a pair
- Made in the U.S.A
- California Residents: WARNING + View More Specs - View Less Specs
PROMOTIONS AUTOMATICALLY APPLIED
Lowest Price! Guaranteed!
Qualifies for Free Shipping
$110.00
Only 1 left in Stock ?
$110.00
Only 1 left in Stock
?
LOW PRICE GUARANTEE
EASY RETURNS
How to Get it
Free! Curbside & In-Store Pickup: Select A Store Near You
Ship to Home:
Only 1 left in Stock ?- Fitment: Universal Fit
- 5x4.5 Bolt Pattern
- Wheel hub centric for increased strength
- 1.50 inch thick
- CNC Machined from billet 6061-T6 aluminum
- Features corrosion resistant red anodizing
- High grade wheel studs and lug nuts
- Can be used with factory or after market wheels
- Includes Loctite
- Sold as a pair
- Made in the U.S.A
- California Residents: WARNING + View More Specs - View Less Specs
PROMOTIONS AUTOMATICALLY APPLIED
Lowest Price! Guaranteed!
Qualifies for Free Shipping
4WP PROTECTION PLAN
Our Protection Plan covers your investment above and beyond the manufacturer's coverage. For only 10% more, if your item is damaged, fails or malfunctions, we'll replace it for free!
Sign In Or Create an Account
Reset Password
An email is sent to .
Enter email address to change your password
After you submit your email address, you'll receive an email a link that will let you change your password.
Choose Your Secure Checkout Method
Create An Account
Add to Wishlist
Synergy HD Steering Tie Rod - 8802-01
- Fitment: Direct Fit
- Fully adjustable to fit all JL Wrangler models with different axle widths
- Heat treated chromoly construction improves tie rod stiffness, strength, and steering feel
- Eliminates any chance of bending this tie rod
- Offers a more direct connection to the road/trail compared to stock
- New Synergy Heavy Duty Metal on Metal Tie Rod Ends are stronger and more durable than stock
- Includes grease fittings/replaceable dust boots for ease of maintenance
- Single plane tie rod end used to eliminate unwanted tie rod flop and prevent the steering deadspot encountered with hydro assist setups
- Simplifies installation and only allows necessary degree of movement of the bar
- Double Adjuster assembly allows adjustment of tie rod length without removing it from the vehicle
- Tie Rod has an outer diameter (OD) of 1.50 inches
- Must use Synergy High Mount Steering Stabilizer kit, 8807-03
- California Residents: WARNING + View More Specs - View Less Specs
PROMOTIONS AUTOMATICALLY APPLIED
Lowest Price! Guaranteed!
Qualifies for Free Shipping
$500.00
On Backorder
Contact Us for Availability or Alternatives
LOW PRICE GUARANTEE
EASY RETURNS
Email me when this product comes in stock
LOW PRICE GUARANTEE
EASY RETURNS
$500.00
On Backorder
Contact Us for Availability or Alternatives
Email me when this product comes in stock
LOW PRICE GUARANTEE
EASY RETURNS
- Fitment: Direct Fit
- Fully adjustable to fit all JL Wrangler models with different axle widths
- Heat treated chromoly construction improves tie rod stiffness, strength, and steering feel
- Eliminates any chance of bending this tie rod
- Offers a more direct connection to the road/trail compared to stock
- New Synergy Heavy Duty Metal on Metal Tie Rod Ends are stronger and more durable than stock
- Includes grease fittings/replaceable dust boots for ease of maintenance
- Single plane tie rod end used to eliminate unwanted tie rod flop and prevent the steering deadspot encountered with hydro assist setups
- Simplifies installation and only allows necessary degree of movement of the bar
- Double Adjuster assembly allows adjustment of tie rod length without removing it from the vehicle
- Tie Rod has an outer diameter (OD) of 1.50 inches
- Must use Synergy High Mount Steering Stabilizer kit, 8807-03
- California Residents: WARNING + View More Specs - View Less Specs
PROMOTIONS AUTOMATICALLY APPLIED
Lowest Price! Guaranteed!
Qualifies for Free Shipping
4WP PROTECTION PLAN
Our Protection Plan covers your investment above and beyond the manufacturer's coverage. For only 10% more, if your item is damaged, fails or malfunctions, we'll replace it for free!
Sign In Or Create an Account
Reset Password
An email is sent to .
Enter email address to change your password
After you submit your email address, you'll receive an email a link that will let you change your password.
Choose Your Secure Checkout Method
Create An Account
Add to Wishlist
Synergy Manufacturing Heavy Duty Drag Link - 8121-02
How to Get it
Free! Curbside & In-Store Pickup: Select A Store Near You
Ship to Home:
Only 1 left in Stock ?- Fitment: Direct Fit
- 1-3/8 inch 1018 solid bar
- Fits vehicles with 2-6 inch of lift
- Abrasive-resistant powder coat finish
- Bent to clear factory axle brackets
- Allows adjustment of Drag Link length without removing it
- 100% bolt on components assures an easy, trouble free installation
- Comes with Synergy HD metal on metal tie rod ends
- Designed to be used with 8121-01 Tie Rod only
- California Residents: WARNING + View More Specs - View Less Specs
PROMOTIONS AUTOMATICALLY APPLIED
Lowest Price! Guaranteed!
Qualifies for Free Shipping
$500.00
Only 1 left in Stock ?
$500.00
Only 1 left in Stock
?
LOW PRICE GUARANTEE
EASY RETURNS
How to Get it
Free! Curbside & In-Store Pickup: Select A Store Near You
Ship to Home:
Only 1 left in Stock ?- Fitment: Direct Fit
- 1-3/8 inch 1018 solid bar
- Fits vehicles with 2-6 inch of lift
- Abrasive-resistant powder coat finish
- Bent to clear factory axle brackets
- Allows adjustment of Drag Link length without removing it
- 100% bolt on components assures an easy, trouble free installation
- Comes with Synergy HD metal on metal tie rod ends
- Designed to be used with 8121-01 Tie Rod only
- California Residents: WARNING + View More Specs - View Less Specs
PROMOTIONS AUTOMATICALLY APPLIED
Lowest Price! Guaranteed!
Qualifies for Free Shipping
4WP PROTECTION PLAN
Our Protection Plan covers your investment above and beyond the manufacturer's coverage. For only 10% more, if your item is damaged, fails or malfunctions, we'll replace it for free!
Sign In Or Create an Account
Reset Password
An email is sent to .
Enter email address to change your password
After you submit your email address, you'll receive an email a link that will let you change your password.
Choose Your Secure Checkout Method
Create An Account
Add to Wishlist
Synergy HD Steering Drag Link - 8800-01
How to Get it
Free! Curbside & In-Store Pickup: Select A Store Near You
Ship to Home:
In-Stock Ships today ?- Fitment: Direct Fit
- Fully adjustable to fit all JL Wrangler models with different axle widths
- Increased tubing wall thickness improves drag link strength and steering feel
- Offers a more direct connection to the road/trail compared to stock
- Bar is fully welded, unlike the crimped OEM design
- New Synergy Heavy Duty Metal on Metal Tie Rod Ends are stronger and more durable than stock
- Include grease fittings/replaceable dust boots for ease of maintenance
- Pitman arm side tie rod end is a single plane design to eliminate unwanted drag link flopDouble Adjuster assembly allows adjustment of drag link length without removing it from the vehicle
- Drag Link Flip Adapter is included for those who will be converting to high steer
- Front Track Bar Relocation Bracket required for high steer conversion
- Relocation of the drag link to the top of the knuckle for high steer requires 3 inch bump stop spacers, front track bar relocation bracket, and wheels with proper backspacing
- Synergy Double Adjuster Sleeve allows adjustment of drag link length without removing it from the vehicle
- California Residents: WARNING + View More Specs - View Less Specs
PROMOTIONS AUTOMATICALLY APPLIED
Lowest Price! Guaranteed!
Qualifies for Free Shipping
$450.00
In-Stock Ships today ?
$450.00
In-Stock Ships today
?
LOW PRICE GUARANTEE
EASY RETURNS
How to Get it
Free! Curbside & In-Store Pickup: Select A Store Near You
Ship to Home:
In-Stock Ships today ?- Fitment: Direct Fit
- Fully adjustable to fit all JL Wrangler models with different axle widths
- Increased tubing wall thickness improves drag link strength and steering feel
- Offers a more direct connection to the road/trail compared to stock
- Bar is fully welded, unlike the crimped OEM design
- New Synergy Heavy Duty Metal on Metal Tie Rod Ends are stronger and more durable than stock
- Include grease fittings/replaceable dust boots for ease of maintenance
- Pitman arm side tie rod end is a single plane design to eliminate unwanted drag link flopDouble Adjuster assembly allows adjustment of drag link length without removing it from the vehicle
- Drag Link Flip Adapter is included for those who will be converting to high steer
- Front Track Bar Relocation Bracket required for high steer conversion
- Relocation of the drag link to the top of the knuckle for high steer requires 3 inch bump stop spacers, front track bar relocation bracket, and wheels with proper backspacing
- Synergy Double Adjuster Sleeve allows adjustment of drag link length without removing it from the vehicle
- California Residents: WARNING + View More Specs - View Less Specs
PROMOTIONS AUTOMATICALLY APPLIED
Lowest Price! Guaranteed!
Qualifies for Free Shipping
4WP PROTECTION PLAN
Our Protection Plan covers your investment above and beyond the manufacturer's coverage. For only 10% more, if your item is damaged, fails or malfunctions, we'll replace it for free!
Sign In Or Create an Account
Reset Password
An email is sent to .
Enter email address to change your password
After you submit your email address, you'll receive an email a link that will let you change your password.
Choose Your Secure Checkout Method
Create An Account
Add to Wishlist
Synergy Heavy-Duty Adjustable Front Track Bar - 8875-01
- Fitment: Direct Fit
- Compatible from 0-4 inches of lift
- Min/max lengths: 33.75 / 34.50 inches
- Made from high quality 1.50 inch x .250 wall DOM
- Retains factory track bar mounting bolts & hardware
- Abrasion-resistant powder coat finish for maximum durability and corrosion resistance
- Synergy double adjuster sleeve & pinch bolt assembly allows for adjustment of track bar length without removing control arm mounting bolt
- Features Synergy Dual Durometer Bushings (DDB) with Teflon bearing surface
- Maintenance free design focusing on performance, flex, longevity, and ride quality
- 100% bolt on components
- Easy, trouble free installation with the use of basic hand tools
- No jam nuts that are impossible to keep tight
- No modifications required to install
- Isolates noise, vibration, and harshness (NVH) increasing ride quality
- Compatible with Synergy HD Steering and Sector Shaft Brace
- Bent to clear most aftermarket differential covers
- Limited Lifetime Warranty
- California Residents: WARNING + View More Specs - View Less Specs
PROMOTIONS AUTOMATICALLY APPLIED
Lowest Price! Guaranteed!
Qualifies for Free Shipping
$330.00
On Backorder
Contact Us for Availability or Alternatives
LOW PRICE GUARANTEE
EASY RETURNS
Email me when this product comes in stock
LOW PRICE GUARANTEE
EASY RETURNS
$330.00
On Backorder
Contact Us for Availability or Alternatives
Email me when this product comes in stock
LOW PRICE GUARANTEE
EASY RETURNS
- Fitment: Direct Fit
- Compatible from 0-4 inches of lift
- Min/max lengths: 33.75 / 34.50 inches
- Made from high quality 1.50 inch x .250 wall DOM
- Retains factory track bar mounting bolts & hardware
- Abrasion-resistant powder coat finish for maximum durability and corrosion resistance
- Synergy double adjuster sleeve & pinch bolt assembly allows for adjustment of track bar length without removing control arm mounting bolt
- Features Synergy Dual Durometer Bushings (DDB) with Teflon bearing surface
- Maintenance free design focusing on performance, flex, longevity, and ride quality
- 100% bolt on components
- Easy, trouble free installation with the use of basic hand tools
- No jam nuts that are impossible to keep tight
- No modifications required to install
- Isolates noise, vibration, and harshness (NVH) increasing ride quality
- Compatible with Synergy HD Steering and Sector Shaft Brace
- Bent to clear most aftermarket differential covers
- Limited Lifetime Warranty
- California Residents: WARNING + View More Specs - View Less Specs
PROMOTIONS AUTOMATICALLY APPLIED
Lowest Price! Guaranteed!
Qualifies for Free Shipping
4WP PROTECTION PLAN
Our Protection Plan covers your investment above and beyond the manufacturer's coverage. For only 10% more, if your item is damaged, fails or malfunctions, we'll replace it for free!
Sign In Or Create an Account
Reset Password
An email is sent to .
Enter email address to change your password
After you submit your email address, you'll receive an email a link that will let you change your password.
Choose Your Secure Checkout Method
Create An Account
Add to Wishlist
Synergy Multi-Rate 4-5" Front Lift Coil Springs - 8863-40
How to Get it
Free! Curbside & In-Store Pickup: Select A Store Near You
Ship to Home:
Only 1 left in Stock ?- Fitment: Direct Fit
- Wrangler JL, 2 & 4 Door
- 4" lift on 4-door models
- 5" lift on 2-door models
- Lifetime warranty/guarantee against sagging and breakage
- Multi-Rate coil springs allow for longer spring lengths and increased travel
- Spring rates are only 5-10 percent stiffer than stock for superior ride quality
- Coil spring block heights designed around common bump stop spacings to optimize wheel travel
- Ground and closed lower spring ends to prevent bowing
- Includes front lower coil spring isolators to match the ground and closed spring ends
- Unique spring lengths for each corner of the vehicle so it will sit level side to side
- Frequency balanced and tuned spring rates to maximize suspension performance on and off road
- Abrasion-resistant black powder coat finish for maximum durability and corrosion resistance
- Sold as a pair
- California Residents: WARNING + View More Specs - View Less Specs
PROMOTIONS AUTOMATICALLY APPLIED
Lowest Price! Guaranteed!
Qualifies for Free Shipping
$300.00
Only 1 left in Stock ?
$300.00
Only 1 left in Stock
?
LOW PRICE GUARANTEE
EASY RETURNS
How to Get it
Free! Curbside & In-Store Pickup: Select A Store Near You
Ship to Home:
Only 1 left in Stock ?- Fitment: Direct Fit
- Wrangler JL, 2 & 4 Door
- 4" lift on 4-door models
- 5" lift on 2-door models
- Lifetime warranty/guarantee against sagging and breakage
- Multi-Rate coil springs allow for longer spring lengths and increased travel
- Spring rates are only 5-10 percent stiffer than stock for superior ride quality
- Coil spring block heights designed around common bump stop spacings to optimize wheel travel
- Ground and closed lower spring ends to prevent bowing
- Includes front lower coil spring isolators to match the ground and closed spring ends
- Unique spring lengths for each corner of the vehicle so it will sit level side to side
- Frequency balanced and tuned spring rates to maximize suspension performance on and off road
- Abrasion-resistant black powder coat finish for maximum durability and corrosion resistance
- Sold as a pair
- California Residents: WARNING + View More Specs - View Less Specs
PROMOTIONS AUTOMATICALLY APPLIED
Lowest Price! Guaranteed!
Qualifies for Free Shipping
4WP PROTECTION PLAN
Our Protection Plan covers your investment above and beyond the manufacturer's coverage. For only 10% more, if your item is damaged, fails or malfunctions, we'll replace it for free!
Sign In Or Create an Account
Reset Password
An email is sent to .
Enter email address to change your password
After you submit your email address, you'll receive an email a link that will let you change your password.
Choose Your Secure Checkout Method
Create An Account
Add to Wishlist
Synergy Manufacturing Rear Lower Shock Mount Kit - 8074
How to Get it
Free! Curbside & In-Store Pickup: Select A Store Near You
Ship to Home:
Only 2 left in Stock ?- Fitment: Universal Fit
- 07-18 Wrangler JK, 2 & 4 Door
- Manufactured from laser cut 3/16 inch steel and CNC bent for superior durability
- Moves lower shock mounts up and out of harms way
- Relocates shock mount for increased ground clearance
- Adjustable to .28 inch, 1.09 inch, 1.91 inch higher than stock
- Stock shock mounts are prone to extreme trail abuse because of low clearance
- Sold as a pair
- Made in the U.S.A
- California Residents: WARNING + View More Specs - View Less Specs
PROMOTIONS AUTOMATICALLY APPLIED
Lowest Price! Guaranteed!
Qualifies for Free Shipping
$100.00
Only 2 left in Stock ?
$100.00
Only 2 left in Stock
?
LOW PRICE GUARANTEE
EASY RETURNS
How to Get it
Free! Curbside & In-Store Pickup: Select A Store Near You
Ship to Home:
Only 2 left in Stock ?- Fitment: Universal Fit
- 07-18 Wrangler JK, 2 & 4 Door
- Manufactured from laser cut 3/16 inch steel and CNC bent for superior durability
- Moves lower shock mounts up and out of harms way
- Relocates shock mount for increased ground clearance
- Adjustable to .28 inch, 1.09 inch, 1.91 inch higher than stock
- Stock shock mounts are prone to extreme trail abuse because of low clearance
- Sold as a pair
- Made in the U.S.A
- California Residents: WARNING + View More Specs - View Less Specs
PROMOTIONS AUTOMATICALLY APPLIED
Lowest Price! Guaranteed!
Qualifies for Free Shipping
4WP PROTECTION PLAN
Our Protection Plan covers your investment above and beyond the manufacturer's coverage. For only 10% more, if your item is damaged, fails or malfunctions, we'll replace it for free!
Sign In Or Create an Account
Reset Password
An email is sent to .
Enter email address to change your password
After you submit your email address, you'll receive an email a link that will let you change your password.
Choose Your Secure Checkout Method
Create An Account
Add to Wishlist
Synergy Multi-Rate 4-5" Rear Lift Coil Springs - 8864-40
- Fitment: Direct Fit
- Wrangler JL, 2 & 4 Door
- 4" lift on 4-door models
- 5" lift on 2-door models
- Lifetime warranty/guarantee against sagging and breakage
- Multi-Rate coil springs allow for longer spring lengths and increased travel
- Spring rates are only 5-10 percent stiffer than stock for superior ride quality
- Coil spring block heights designed around common bump stop spacings to optimize wheel travel
- Ground and closed lower spring ends to prevent bowing
- Includes front lower coil spring isolators to match the ground and closed spring ends
- Unique spring lengths for each corner of the vehicle so it will sit level side to side
- Frequency balanced and tuned spring rates to maximize suspension performance on and off road
- Abrasion-resistant black powder coat finish for maximum durability and corrosion resistance
- Sold as a pair
- California Residents: WARNING + View More Specs - View Less Specs
PROMOTIONS AUTOMATICALLY APPLIED
Lowest Price! Guaranteed!
Qualifies for Free Shipping
$260.00
On Backorder
Contact Us for Availability or Alternatives
LOW PRICE GUARANTEE
EASY RETURNS
Email me when this product comes in stock
LOW PRICE GUARANTEE
EASY RETURNS
$260.00
On Backorder
Contact Us for Availability or Alternatives
Email me when this product comes in stock
LOW PRICE GUARANTEE
EASY RETURNS
- Fitment: Direct Fit
- Wrangler JL, 2 & 4 Door
- 4" lift on 4-door models
- 5" lift on 2-door models
- Lifetime warranty/guarantee against sagging and breakage
- Multi-Rate coil springs allow for longer spring lengths and increased travel
- Spring rates are only 5-10 percent stiffer than stock for superior ride quality
- Coil spring block heights designed around common bump stop spacings to optimize wheel travel
- Ground and closed lower spring ends to prevent bowing
- Includes front lower coil spring isolators to match the ground and closed spring ends
- Unique spring lengths for each corner of the vehicle so it will sit level side to side
- Frequency balanced and tuned spring rates to maximize suspension performance on and off road
- Abrasion-resistant black powder coat finish for maximum durability and corrosion resistance
- Sold as a pair
- California Residents: WARNING + View More Specs - View Less Specs
PROMOTIONS AUTOMATICALLY APPLIED
Lowest Price! Guaranteed!
Qualifies for Free Shipping
4WP PROTECTION PLAN
Our Protection Plan covers your investment above and beyond the manufacturer's coverage. For only 10% more, if your item is damaged, fails or malfunctions, we'll replace it for free!
Sign In Or Create an Account
Reset Password
An email is sent to .
Enter email address to change your password
After you submit your email address, you'll receive an email a link that will let you change your password.
Choose Your Secure Checkout Method
Create An Account
Add to Wishlist
Synergy Manufacturing Jeep Dana 30/44 Heavy Duty Ball Joint Set - 4120
How to Get it
Free! Curbside & In-Store Pickup: Select A Store Near You
Ship to Home:
In-Stock Ships today ?- Fitment: Direct Fit
- Factory Replacement for Most Dana 44 and Dana 30 Applications
- Fully Greasable
- Sintered Metal On Bushing Design
- Silicone Boot
- 2 Upper Ball Joints
- 2 Lower Ball Joints
- Fits All Jeep TJ / LJ
- Fits 90-01 Jeep YJ / ZJ / XJ
- California Residents: WARNING + View More Specs - View Less Specs
PROMOTIONS AUTOMATICALLY APPLIED
Lowest Price! Guaranteed!
Qualifies for Free Shipping
$250.00
$250.00
In-Stock Ships today ?
$250.00
$250.00
In-Stock Ships today
?
LOW PRICE GUARANTEE
EASY RETURNS
How to Get it
Free! Curbside & In-Store Pickup: Select A Store Near You
Ship to Home:
In-Stock Ships today ?- Fitment: Direct Fit
- Factory Replacement for Most Dana 44 and Dana 30 Applications
- Fully Greasable
- Sintered Metal On Bushing Design
- Silicone Boot
- 2 Upper Ball Joints
- 2 Lower Ball Joints
- Fits All Jeep TJ / LJ
- Fits 90-01 Jeep YJ / ZJ / XJ
- California Residents: WARNING + View More Specs - View Less Specs
PROMOTIONS AUTOMATICALLY APPLIED
Lowest Price! Guaranteed!
Qualifies for Free Shipping
4WP PROTECTION PLAN
Our Protection Plan covers your investment above and beyond the manufacturer's coverage. For only 10% more, if your item is damaged, fails or malfunctions, we'll replace it for free!
Sign In Or Create an Account
Reset Password
An email is sent to .
Enter email address to change your password
After you submit your email address, you'll receive an email a link that will let you change your password.
Choose Your Secure Checkout Method
Create An Account
Add to Wishlist
Synergy Manufacturing Heavy Duty Metal-on-Metal Tie Rod End - 4131-R
How to Get it
Free! Curbside & In-Store Pickup: Select A Store Near You
Ship to Home:
Only 4 left in Stock ?- Fitment: Direct Fit
- Fully greasable sintered metal on metal bushing design
- Tie Rod end boot is made from silicone and polyurethane
- 7/8-18 UNF RH Thread
- Spring loaded bearing design keeps pressure on bearings
- Made in the U.S.A
- California Residents: WARNING + View More Specs - View Less Specs
PROMOTIONS AUTOMATICALLY APPLIED
Lowest Price! Guaranteed!
Qualifies for Free Shipping on Orders Over $99
$60.00
Only 4 left in Stock ?
$60.00
Only 4 left in Stock
?
LOW PRICE GUARANTEE
EASY RETURNS
How to Get it
Free! Curbside & In-Store Pickup: Select A Store Near You
Ship to Home:
Only 4 left in Stock ?- Fitment: Direct Fit
- Fully greasable sintered metal on metal bushing design
- Tie Rod end boot is made from silicone and polyurethane
- 7/8-18 UNF RH Thread
- Spring loaded bearing design keeps pressure on bearings
- Made in the U.S.A
- California Residents: WARNING + View More Specs - View Less Specs
PROMOTIONS AUTOMATICALLY APPLIED
Lowest Price! Guaranteed!
Qualifies for Free Shipping on Orders Over $99
4WP PROTECTION PLAN
Our Protection Plan covers your investment above and beyond the manufacturer's coverage. For only 10% more, if your item is damaged, fails or malfunctions, we'll replace it for free!
Sign In Or Create an Account
Reset Password
An email is sent to .
Enter email address to change your password
After you submit your email address, you'll receive an email a link that will let you change your password.
Choose Your Secure Checkout Method
Create An Account
Add to Wishlist
Synergy Manufacturing Front Track Bar Relocation Bracket - 8055
How to Get it
Free! Curbside & In-Store Pickup: Select A Store Near You
Ship to Home:
In-Stock Ships today ?- Fitment: Direct Fit
- Compatible with 3.0 inch and taller lifts
- Laser cut from 3/16 inch steel
- 2 stage powdercoat finish
- Made in the U.S.A
- California Residents: WARNING + View More Specs - View Less Specs
PROMOTIONS AUTOMATICALLY APPLIED
Lowest Price! Guaranteed!
Qualifies for Free Shipping
$220.00
In-Stock Ships today ?
$220.00
In-Stock Ships today
?
LOW PRICE GUARANTEE
EASY RETURNS
How to Get it
Free! Curbside & In-Store Pickup: Select A Store Near You
Ship to Home:
In-Stock Ships today ?- Fitment: Direct Fit
- Compatible with 3.0 inch and taller lifts
- Laser cut from 3/16 inch steel
- 2 stage powdercoat finish
- Made in the U.S.A
- California Residents: WARNING + View More Specs - View Less Specs
PROMOTIONS AUTOMATICALLY APPLIED
Lowest Price! Guaranteed!
Qualifies for Free Shipping
4WP PROTECTION PLAN
Our Protection Plan covers your investment above and beyond the manufacturer's coverage. For only 10% more, if your item is damaged, fails or malfunctions, we'll replace it for free!
Sign In Or Create an Account
Reset Password
An email is sent to .
Enter email address to change your password
After you submit your email address, you'll receive an email a link that will let you change your password.
Choose Your Secure Checkout Method
Create An Account
Add to Wishlist
Synergy Manufacturing Wheel Spacers - 4112-6-55-H
- Fitment: Universal Fit
- 6x5.5 Bolt Pattern
- Wheel hub centric for increased strength
- 1.50 inch thick
- CNC Machined from billet 6061-T6 aluminum
- Features corrosion resistant red anodizing
- High grade wheel studs and lug nuts
- Can be used with factory or after market wheels
- Includes Loctite
- Sold As A Pair
- Made in the U.S.A
- California Residents: WARNING + View More Specs - View Less Specs
PROMOTIONS AUTOMATICALLY APPLIED
Lowest Price! Guaranteed!
Qualifies for Free Shipping
$110.00
On Backorder
Contact Us for Availability or Alternatives
LOW PRICE GUARANTEE
EASY RETURNS
Email me when this product comes in stock
LOW PRICE GUARANTEE
EASY RETURNS
$110.00
On Backorder
Contact Us for Availability or Alternatives
Email me when this product comes in stock
LOW PRICE GUARANTEE
EASY RETURNS
- Fitment: Universal Fit
- 6x5.5 Bolt Pattern
- Wheel hub centric for increased strength
- 1.50 inch thick
- CNC Machined from billet 6061-T6 aluminum
- Features corrosion resistant red anodizing
- High grade wheel studs and lug nuts
- Can be used with factory or after market wheels
- Includes Loctite
- Sold As A Pair
- Made in the U.S.A
- California Residents: WARNING + View More Specs - View Less Specs
PROMOTIONS AUTOMATICALLY APPLIED
Lowest Price! Guaranteed!
Qualifies for Free Shipping
4WP PROTECTION PLAN
Our Protection Plan covers your investment above and beyond the manufacturer's coverage. For only 10% more, if your item is damaged, fails or malfunctions, we'll replace it for free!
Sign In Or Create an Account
Reset Password
An email is sent to .
Enter email address to change your password
After you submit your email address, you'll receive an email a link that will let you change your password.
Choose Your Secure Checkout Method
Create An Account
Add to Wishlist
Synergy Manufacturing Front Axle Truss - 8012-15
How to Get it
Free! Curbside & In-Store Pickup: Select A Store Near You
Ship to Home:
Only 1 left in Stock ?- Fitment: Direct Fit
- 07-18 Wrangler JK, 2 & 4 Door
- Dana 44 front axle
- Strengthens factory JK axle housing
- Formed design significantly reduces installation time compared to multi-piece designs
- Replaces weak stock passenger side upper control arm mount and includes BOTH passenger side and driver side
- Dual Durometer Bushings (DDB) for axle housing
- Utilizes OEM size bushings - no proprietary sizes to commit to
- Synergy Dual Durometer Bushings (DDB) feature a Teflon bearing surface for a maintenance free design focusing on performance, flex, longevity, and ride quality
- Compatible with stock, Synergy Bolt-On and Synergy Weld-On track bar relocation brackets
- CNC formed 3/16" steel construction
- Requires cutting/welding experience - should be installed by experienced welder/fabricator
- California Residents: WARNING + View More Specs - View Less Specs
PROMOTIONS AUTOMATICALLY APPLIED
Lowest Price! Guaranteed!
Qualifies for Free Shipping
$200.00
Only 1 left in Stock ?
$200.00
Only 1 left in Stock
?
LOW PRICE GUARANTEE
EASY RETURNS
How to Get it
Free! Curbside & In-Store Pickup: Select A Store Near You
Ship to Home:
Only 1 left in Stock ?- Fitment: Direct Fit
- 07-18 Wrangler JK, 2 & 4 Door
- Dana 44 front axle
- Strengthens factory JK axle housing
- Formed design significantly reduces installation time compared to multi-piece designs
- Replaces weak stock passenger side upper control arm mount and includes BOTH passenger side and driver side
- Dual Durometer Bushings (DDB) for axle housing
- Utilizes OEM size bushings - no proprietary sizes to commit to
- Synergy Dual Durometer Bushings (DDB) feature a Teflon bearing surface for a maintenance free design focusing on performance, flex, longevity, and ride quality
- Compatible with stock, Synergy Bolt-On and Synergy Weld-On track bar relocation brackets
- CNC formed 3/16" steel construction
- Requires cutting/welding experience - should be installed by experienced welder/fabricator
- California Residents: WARNING + View More Specs - View Less Specs
PROMOTIONS AUTOMATICALLY APPLIED
Lowest Price! Guaranteed!
Qualifies for Free Shipping
4WP PROTECTION PLAN
Our Protection Plan covers your investment above and beyond the manufacturer's coverage. For only 10% more, if your item is damaged, fails or malfunctions, we'll replace it for free!
Sign In Or Create an Account
Reset Password
An email is sent to .
Enter email address to change your password
After you submit your email address, you'll receive an email a link that will let you change your password.
Choose Your Secure Checkout Method
Create An Account
Add to Wishlist
Synergy Rear Axle Truss - 8072-06
How to Get it
Free! Curbside & In-Store Pickup: Select A Store Near You
Ship to Home:
Only 2 left in Stock ?- Fitment: Direct Fit
- Rear truss
- Strengthens factory JK axle housing
- Formed design significantly reduces installation time compared to multi-piece designs
- Compatible with stock, Synergy bolt-on, and Synergy weld-on track bar relocation brackets
- CNC formed 3/16 inch steel construction
- Seams welded
- Compatible with both Rubicon and non-Rubicon Jeeps
- Does not require additional bump-stop spacer height
- Requires cutting/welding experience - should be installed by experienced welder/fabricator
- Axle truss and track bar brackets can be installed in any order
- Recommended to be used in conjunction with 8012-15 front axle truss
- Some trimming/fitment may be required due to slight variations from axle to axle
- California Residents: WARNING + View More Specs - View Less Specs
PROMOTIONS AUTOMATICALLY APPLIED
Lowest Price! Guaranteed!
Qualifies for Free Shipping
$200.00
Only 2 left in Stock ?
$200.00
Only 2 left in Stock
?
LOW PRICE GUARANTEE
EASY RETURNS
How to Get it
Free! Curbside & In-Store Pickup: Select A Store Near You
Ship to Home:
Only 2 left in Stock ?- Fitment: Direct Fit
- Rear truss
- Strengthens factory JK axle housing
- Formed design significantly reduces installation time compared to multi-piece designs
- Compatible with stock, Synergy bolt-on, and Synergy weld-on track bar relocation brackets
- CNC formed 3/16 inch steel construction
- Seams welded
- Compatible with both Rubicon and non-Rubicon Jeeps
- Does not require additional bump-stop spacer height
- Requires cutting/welding experience - should be installed by experienced welder/fabricator
- Axle truss and track bar brackets can be installed in any order
- Recommended to be used in conjunction with 8012-15 front axle truss
- Some trimming/fitment may be required due to slight variations from axle to axle
- California Residents: WARNING + View More Specs - View Less Specs
PROMOTIONS AUTOMATICALLY APPLIED
Lowest Price! Guaranteed!
Qualifies for Free Shipping
4WP PROTECTION PLAN
Our Protection Plan covers your investment above and beyond the manufacturer's coverage. For only 10% more, if your item is damaged, fails or malfunctions, we'll replace it for free!
Sign In Or Create an Account
Reset Password
An email is sent to .
Enter email address to change your password
After you submit your email address, you'll receive an email a link that will let you change your password.
Choose Your Secure Checkout Method
Create An Account
Add to Wishlist
Synergy Manufacturing HD Metal on Metal Tie Rod End (7/8-18 LH) - 4131-L
How to Get it
Free! Curbside & In-Store Pickup: Select A Store Near You
Ship to Home:
In-Stock Ships today ?- Fitment: Direct Fit
- 07-18 Wrangler JK, 2 & 4 Door
- Left hand thread
- 4131-L are designed specifically to be used in the following Synergy products: 8000-01 Drag Link (knuckle side only), 8001 Drag Link (knuckle side only), 8002 Tie Rod
- Fully greasable sintered metal-on-metal bushing design has high wear resistance
- Specially designed grease grooves in the OD of the ball to allow for maximum lubrication
- Spring loaded bearing design keeps pressure on bearings and keeps the joint tight as it wears
- Forged bearing housing made from 1018 steel for a strong, smooth, bearing surface
- Tie Rod End stud made from 4140 steel with an induction heat treated bearing surface for smooth operation and maximum life
- Single Plane tie rod ends offer misalignment in one direction of movement only. This eliminates drag link flop on the products they are designed for
- Outperforms the factory and all other aftermarket style tie rod ends by offering a larger shank with no stress riser (doesn't neck down at base) and elimination of the nylon ball race
- Boots are made from tear/wear resistant black NBR and come with retaining springs
- Includes all necessary hardware for installation
- Synergy High Performance Grease (4119) is the recommended grease for this product
- California Residents: WARNING + View More Specs - View Less Specs
PROMOTIONS AUTOMATICALLY APPLIED
Lowest Price! Guaranteed!
Qualifies for Free Shipping on Orders Over $99
$60.00
In-Stock Ships today ?
$60.00
In-Stock Ships today
?
LOW PRICE GUARANTEE
EASY RETURNS
How to Get it
Free! Curbside & In-Store Pickup: Select A Store Near You
Ship to Home:
In-Stock Ships today ?- Fitment: Direct Fit
- 07-18 Wrangler JK, 2 & 4 Door
- Left hand thread
- 4131-L are designed specifically to be used in the following Synergy products: 8000-01 Drag Link (knuckle side only), 8001 Drag Link (knuckle side only), 8002 Tie Rod
- Fully greasable sintered metal-on-metal bushing design has high wear resistance
- Specially designed grease grooves in the OD of the ball to allow for maximum lubrication
- Spring loaded bearing design keeps pressure on bearings and keeps the joint tight as it wears
- Forged bearing housing made from 1018 steel for a strong, smooth, bearing surface
- Tie Rod End stud made from 4140 steel with an induction heat treated bearing surface for smooth operation and maximum life
- Single Plane tie rod ends offer misalignment in one direction of movement only. This eliminates drag link flop on the products they are designed for
- Outperforms the factory and all other aftermarket style tie rod ends by offering a larger shank with no stress riser (doesn't neck down at base) and elimination of the nylon ball race
- Boots are made from tear/wear resistant black NBR and come with retaining springs
- Includes all necessary hardware for installation
- Synergy High Performance Grease (4119) is the recommended grease for this product
- California Residents: WARNING + View More Specs - View Less Specs
PROMOTIONS AUTOMATICALLY APPLIED
Lowest Price! Guaranteed!
Qualifies for Free Shipping on Orders Over $99
4WP PROTECTION PLAN
Our Protection Plan covers your investment above and beyond the manufacturer's coverage. For only 10% more, if your item is damaged, fails or malfunctions, we'll replace it for free!
Sign In Or Create an Account
Reset Password
An email is sent to .
Enter email address to change your password
After you submit your email address, you'll receive an email a link that will let you change your password.
Choose Your Secure Checkout Method
Create An Account
Add to Wishlist
Synergy Manufacturing Dodge 16mm Cam Bolt Eliminator Kit 00-09 - 8565-02
How to Get it
Free! Curbside & In-Store Pickup: Select A Store Near You
Ship to Home:
In-Stock Ships today ?- Fitment: Direct Fit
- 00-01 Ram 1500 / 00-09 Ram 2500/3500 / 06-08 Ram 1500 Megacab 4x4
- Made from 303 Stainless Steel
- Provides smooth mounting surface for bushing face
- Eliminates factory alignment cam washers
- Retains factory control arm bolt
- Allows for even torque to be applied on bushing surface
- Includes 4 cam bolt eliminators for both front lower control arms
- California Residents: WARNING + View More Specs - View Less Specs
PROMOTIONS AUTOMATICALLY APPLIED
Lowest Price! Guaranteed!
Qualifies for Free Shipping
$110.00
In-Stock Ships today ?
$110.00
In-Stock Ships today
?
LOW PRICE GUARANTEE
EASY RETURNS
How to Get it
Free! Curbside & In-Store Pickup: Select A Store Near You
Ship to Home:
In-Stock Ships today ?- Fitment: Direct Fit
- 00-01 Ram 1500 / 00-09 Ram 2500/3500 / 06-08 Ram 1500 Megacab 4x4
- Made from 303 Stainless Steel
- Provides smooth mounting surface for bushing face
- Eliminates factory alignment cam washers
- Retains factory control arm bolt
- Allows for even torque to be applied on bushing surface
- Includes 4 cam bolt eliminators for both front lower control arms
- California Residents: WARNING + View More Specs - View Less Specs
PROMOTIONS AUTOMATICALLY APPLIED
Lowest Price! Guaranteed!
Qualifies for Free Shipping
4WP PROTECTION PLAN
Our Protection Plan covers your investment above and beyond the manufacturer's coverage. For only 10% more, if your item is damaged, fails or malfunctions, we'll replace it for free!
Sign In Or Create an Account
Reset Password
An email is sent to .
Enter email address to change your password
After you submit your email address, you'll receive an email a link that will let you change your password.
Choose Your Secure Checkout Method
Create An Account
Add to Wishlist
Flex-A-Lite 12" Replacement Fan Blade - 106895
How to Get it
Free! Curbside & In-Store Pickup: Select A Store Near You
Ship to Home:
Only 1 left in Stock ?- Fitment: Universal Fit
- 12" Replacement Fan Blade Kit
- Replacement straight blade for fan part No. 112 and 11224
- Reversible blade (pusher or puller)
- Single 10-blade replacement
- Includes replacement E-clip
- Glass reinforced nylon construction
- California Residents: WARNING + View More Specs - View Less Specs
PROMOTIONS AUTOMATICALLY APPLIED
SHOP 4WP's HUGE SELECTION
Qualifies for Free Shipping on Orders Over $99
$51.99
Only 1 left in Stock ?
$51.99
Only 1 left in Stock
?
LOW PRICE GUARANTEE
EASY RETURNS
How to Get it
Free! Curbside & In-Store Pickup: Select A Store Near You
Ship to Home:
Only 1 left in Stock ?- Fitment: Universal Fit
- 12" Replacement Fan Blade Kit
- Replacement straight blade for fan part No. 112 and 11224
- Reversible blade (pusher or puller)
- Single 10-blade replacement
- Includes replacement E-clip
- Glass reinforced nylon construction
- California Residents: WARNING + View More Specs - View Less Specs
PROMOTIONS AUTOMATICALLY APPLIED
SHOP 4WP's HUGE SELECTION
Qualifies for Free Shipping on Orders Over $99
4WP PROTECTION PLAN
Our Protection Plan covers your investment above and beyond the manufacturer's coverage. For only 10% more, if your item is damaged, fails or malfunctions, we'll replace it for free!
Sign In Or Create an Account
Reset Password
An email is sent to .
Enter email address to change your password
After you submit your email address, you'll receive an email a link that will let you change your password.
Choose Your Secure Checkout Method
Create An Account
Add to Wishlist
Flex-A-Lite Replacement Circuit Board - 102767
How to Get it
Free! Curbside & In-Store Pickup: Select A Store Near You
Ship to Home:
Only 3 left in Stock ?- Fitment: Universal Fit
- Replacement circuit board
- With relay for control module
- To use in fan part No. 111, 133, 180, 185, 318, 330, 345, 412, 432, 485, 575, 675 and 678
- Includes built-in relay
- 12 Volt
- California Residents: WARNING + View More Specs - View Less Specs
PROMOTIONS AUTOMATICALLY APPLIED
SHOP 4WP's HUGE SELECTION
Qualifies for Free Shipping on Orders Over $99
$43.99
Only 3 left in Stock ?
$43.99
Only 3 left in Stock
?
LOW PRICE GUARANTEE
EASY RETURNS
How to Get it
Free! Curbside & In-Store Pickup: Select A Store Near You
Ship to Home:
Only 3 left in Stock ?- Fitment: Universal Fit
- Replacement circuit board
- With relay for control module
- To use in fan part No. 111, 133, 180, 185, 318, 330, 345, 412, 432, 485, 575, 675 and 678
- Includes built-in relay
- 12 Volt
- California Residents: WARNING + View More Specs - View Less Specs
PROMOTIONS AUTOMATICALLY APPLIED
SHOP 4WP's HUGE SELECTION
Qualifies for Free Shipping on Orders Over $99
4WP PROTECTION PLAN
Our Protection Plan covers your investment above and beyond the manufacturer's coverage. For only 10% more, if your item is damaged, fails or malfunctions, we'll replace it for free!
Sign In Or Create an Account
Reset Password
An email is sent to .
Enter email address to change your password
After you submit your email address, you'll receive an email a link that will let you change your password.
Choose Your Secure Checkout Method
Create An Account
Add to Wishlist
Synergy Steering Stabilizer Clamp Adapter - 4051-01
- Fitment: Universal Fit
- Fits FOX TS and ATS Steering Stabilizers
- 100% bolt on components assures an easy, trouble free installation with the use of basic hand tools
- Zinc plated Hardware for maximum corrosion resistance
- Stepped washer is machined from 6061 billet aluminum
- Can be used with multiple sized clamps
- Flat head socket cap screw
- Machined aluminum washer
- To be used with Synergy 4050 clamps
- California Residents: WARNING + View More Specs - View Less Specs
PROMOTIONS AUTOMATICALLY APPLIED
Lowest Price! Guaranteed!
Qualifies for Free Shipping on Orders Over $99
$25.00
On Backorder
Contact Us for Availability or Alternatives
LOW PRICE GUARANTEE
EASY RETURNS
Email me when this product comes in stock
LOW PRICE GUARANTEE
EASY RETURNS
$25.00
On Backorder
Contact Us for Availability or Alternatives
Email me when this product comes in stock
LOW PRICE GUARANTEE
EASY RETURNS
- Fitment: Universal Fit
- Fits FOX TS and ATS Steering Stabilizers
- 100% bolt on components assures an easy, trouble free installation with the use of basic hand tools
- Zinc plated Hardware for maximum corrosion resistance
- Stepped washer is machined from 6061 billet aluminum
- Can be used with multiple sized clamps
- Flat head socket cap screw
- Machined aluminum washer
- To be used with Synergy 4050 clamps
- California Residents: WARNING + View More Specs - View Less Specs
PROMOTIONS AUTOMATICALLY APPLIED
Lowest Price! Guaranteed!
Qualifies for Free Shipping on Orders Over $99
