Fab Fours Premium Front Bumpers

From $2,889.99

• Provides more tire clearance
• Winch ready (Accepts up to 16,500 lb. winches or smaller)
• 3/4 inch D-ring Mounts
• 1/4 inch Boxed mounting system with adjustability to allow a custom fit
• Fab Fours signature injection molded light housings
• Fab Fours 90mm fog and 60mm turn indicator lights included FREE with the bumper
• 2 Stage matte black powder coat or bare steel (-B instead of -1)
• Combination of 1/4 inch and 3/16 inch steel construction
• 100% Made in the USA
• California Residents: WARNING

Fab Fours Vengeance Front Bumpers

From $1,399.99

• Available in 2 Stage Black Powder Coat or Bare Steel
• Overall design and fit is inchHigh and Tight inch to the contours of the vehicle
• The Vengeance Series front bumper is sensor compatible
• Allows for an integrated 20 inch LED light bar in the center (light bar not included)
• Mounting options on each side for (2) 2x2 Dually lights to give you maximum LED light coverage
• Lower cutout to provide airflow to intercoolers
• Complete bolt-on front bumper w/ provided brackets that tie directly to the frame
• Sensors optimized for vehicles with suspension lifts - stock height trucks may require tuning the sensor mount and will require special care
• Available in a no guard or pre-runner guard option.
• California Residents: WARNING

Fab Fours Black Steel Front Ranch Bumpers

From $1,729.99

• Combination Pipe and Tread Plate Construction
• Gloss Black Powder Coat or Bare Steel (-B instead of -1)
• Back up lights included
• Pre-drilled sensor holes
• Retains OEM receiver hitch and wiring locations
• 100% Made in the USA
• California Residents: WARNING

Fab Fours Vengeance Rear Bumpers

From $1,099.99

• Available in Bare Steel and Fab Fours 2 Stage Black Powder Coat
• Two front-side openings allow light options
• (4) 2x2 Dually lights or (2) 6 inch light bars (lights are not included)
• 11gauge US Steel Construction
• Sensor compatible
• Retain OEM Receiver Hitch and Wiring Location
• 11gauge US Stee
• Weight: 65 lbs.
• U.S. Steel Construction
• 100% Made in the USA
• California Residents: WARNING

TeraFlex CRD60 HD Axle Assemblies

From $2,620.99

• Tera CRD60 specific high-pinion rear axle housing design
• HD bearing caps increase rigidity and reduce ring and pinion distortion
• Constant Radius Design (CRD) provides maximum ground clearance regardless of pinion angle
• Built-in “skimmer” cuts ring gear oil halo and forces it into the pinion bearings
• Outer pinion bearing pocket features a renewable oil reservoir that sends cool oil to the pinion bearing
• Oversized outer pinion bearing handles increased torque and high-load conditions
• High-capacity housing holds maximum amount of oil
• Asymmetric housing design for extra-long tube side strength
• Pre-installed inner axle seals
• Ductile cast iron housing with increased rib gussets
• HD ductile iron differential cover with increased cover mounting area
• Integrated lower control arm skid plates
• High-flow oil passages
• Bottom oil drain hole for simple fluid changes
• Reinforced rear track bar mount with multiple mounting locations
• UV protected triple-stage powder coat for corrosion resistance
• 1/4”-thick CNC laser cut axle brackets for extreme strength
• Pre-installed upper control arm bushings
• Proper pinion angle for lifted applications
• Features a raised pinion angle and raised track bar bracket
• Pre-tapped hole on spring perch for bump stop extensions
• Pre-drilled holes for limit straps and lower spring retainers
• Retains all ESP, ABS, and speedometer sensor capability
• 100% engineered, designed, and built in the USA with new components

TeraFlex NP231 Extreme Short Shaft Kit

From $9.99

• Extreme Short Shaft Kit
• With 231 transfer case
• Eliminates slip yoke
• Requires a longer CV style drive shaft
• California Residents: WARNING

TeraFlex Sway Bar Links

From $16.99

• Sway Bar Links
• Teraflex Front Links when connected provides immediate reaction during sway bar loading to eliminate excess play
• Rear Links are designed to reduce clearance issues between the tire and rear sway bar
• Available for different lift heights and fixed or quick disconnect styles
• California Residents: WARNING

TeraFlex Short Shaft SYE

From $11.99

• Eliminates slip yoke and need for transfer case drop
• Withstands 50% more torque
• Increases rear drive shaft length by 4 inch
• Requires use of CV style rear drive shaft
• California Residents: WARNING

TeraFlex Disc Brake Kit

From $7.99

• Disc Brake Kit
• Bolt-on upgrade to replace factory Jeep drum brakes
• Dana 35 c-clip, Dana 44 and Chrysler 8.25
• Kits Includes Rotors
• Backing Plates with Integrated Park Brake
• Calipers
• Brake Pads
• Hardware
• California Residents: WARNING

TeraFlex Heavy-Duty Tie Rod

From $215.99

• Tie Rod
• Heavy-Duty
• 1-1/2 inch hexagon 6061 T6 aluminum
• For use with Dana 30 high steer knuckle
• Small taper
• California Residents: WARNING

TeraFlex Rear Disc Brake Conversion

From $7.99

• Rear Disc Brake Conversion
• Non C-clip and D-44 rear axles
• Improves stopping power
• Bolt-on installation
• Kit includes everything needed to convert to disc brakes
• California Residents: WARNING

TeraFlex Revolver Crush Cushion

From $7.99

• Replace your worn Revolver Shackle components, and restore complete functionality
• The UHMW nylon cushion keeps the Revolver shackle properly positioned when folded in the closed/resting position
• Sold Individually
• California Residents: WARNING

TeraFlex Sway Bar Bushing Kit

From $24.99

• This TeraFlex Bushing Ball Replacement Kit is designed to serve as direct replacements for the TeraFlex brand quick disconnect swaybar link bushings
• The polyurethane bushings are specifically designed for easy replacing
• California Residents: WARNING

TeraFlex Falcon 1.1 Monotube Shocks

From $460.00

TeraFlex Base Lift Kits

From $1,049.99

• Depending On Lift Height And Vehicle Model Kits Typically Include:
• Dropped Pitman Arm
• Front Sway Bar Disconnects
• Rear Sway Bar Links
• Rear Track Bar Bracket
• Bump Stops
• Brake Line Extension Brackets
• All Necessary Hardware
• California Residents: WARNING

TeraFlex Rubber Bushings

From $21.99

• The TeraFlex TJ rear upper small FlexArm rubber Joint provides excellent off-road capabilities with articulation and durability
• The rubber bushing provides superior vibration damping, reduces road noise, eliminates clunks, and maintains proper position for maximum articulation during travel
• Sold Individually
• California Residents: WARNING

TeraFlex Tera44 HD Axle Assemblies

From $2,974.99

• 3.25” O.D. x 0.25” wall axle tube increases torsional strength to resist bending with minimal weight increase
• Asymmetric housing design for extra-long tube side strength
• Pre-installed inner axle seals
• HD forged inner knuckles with greater upper and lower section strength
• Ductile cast iron housing with increased rib gussets
• HD ductile iron differential cover
• Smooth radius bottom design to glide over rocks and obstacles
• Integrated lower control arm skid plates
• High-flow oil passages and bottom oil drain hole for simple fluid changes
• Reinforced front track bar mount (ties into spring pad) for greater strength
• UV protected triple-stage powder coat for corrosion resistance
• 1/4”-thick CNC laser cut axle brackets for extreme strength
• Integrated factory location upper control arm mount
• Pre-installed upper control arm bushings
• Proper pinion angle for lifted applications
• Pre-tapped hole on spring perch for bump stop extensions
• Pre-drilled holes for limit straps and lower spring retainers
• Retains all ESP, ABS, and speedometer sensor capability
• 100% engineered, designed, and built in the USA with new components

TeraFlex Sport ST2 Suspension Systems

From $1,201.99

• Delivers True Street & Trail (S/T) Performance
• Install & Drive Simple Bolt-On Installation
• Dependable Performance With Zero Worries
• Positive, Responsive Handling
• Reduced Vibration & Harshness
• Preset Front Lower Sport Flexarms Optimize Correct Caster & Pinion Angles
• High Quality, Factory Style Bushings Provide Excellent Vibration Damping & Ride Quality With Zero Maintenance
• Speedbump Progressive Bump Stops
• No Alignment Or Adjustment Required
• Teraflex Lifetime Warranty
• Fits Up To 35” Tires
• California Residents: WARNING

TeraFlex Flexarm Suspension Systems

From $1,828.99

• Includes Lift Coil Springs
• Front Adjustable Track Bar
• Shock Absorbers (Depending On Kit)
• Lower And Upper Adjustable Flexarms (Depending On Kit)
• Front Sway Bar Disconnects
• Rear Sway Bar Links
• Rear Track Bar Bracket
• Bump Stops And All Necessary Hardware
• California Residents: WARNING

Fab Fours Matrix Front Bumpers

From $1,739.99

• Aggressive design
• Center mount accommodates a 30 inch light bar (not included)
• Customizable - Removable inserts for different color options
• Side mounting slots and tabs for various light options (lights not included)