Warrior Quicklatch Axe/Shovel Mount - 10375

• Fitment: Universal Fit
• Universal
• Warrior Rack systems: Platform Racks, MOD Racks, Economy Bed Racks, and Platform Half Racks
• Can be installed on any flat surface
• Sold as a pair
• Easily adjustable to grip all handles between 7/8" diameter to 1-1/2" diameter
• Fully lockable using any padlock or cable lock
• Quick access to your tools
• All Hardware Included
• No drilling or cutting required
• 100% Designed, Manufactured, and Welded in the USA
• California Residents: WARNING
+ View More Specs - View Less Specs

Warrior SHOVEL & AXE MOUNT, FOR PLATFORM RACK, 07-14 FJ CRUISER - 3875

• Fitment: Universal Fit

HornBlasters Outlaw 127H Train Horn Kit - HK-C3B-127H

• Fitment: Universal Fit
• Black finish Outlaw train horn
• Max hon time is 3 to 5 seconds
• HornBlasters 127H air source unit
• 10 ft of 1/2 inch D.O.T. airline
• 18 ft 12 ga hookup wire
• Viair 1.5 gallon 4 port tank
• Viair 275C Air Compressor
• 12 volts DC
• 18 amps
• Mounitng hardware included
• WIring and plumbing kit included along with detailed instructions
• Tank air compressor are not fully sealed. It is recommended to mount the tank or compressor system in the upright position in an enclosed space to prevent any damage
• California Residents: WARNING
+ View More Specs - View Less Specs

HornBlasters Conductor's Special 232 Train Horn Kit - HK-S4-232

• Fitment: Universal Fit
• Black finish Shocker S4 train horn
• 5 to 7 second max honk time
• Can be heard from 4 miles away
• HornBlasrers 110/150 PSI pressure switch
• Remote mountable intake filter assembly
• Air filter cartridges
• 10 ft of 5/16 inch D.O.T. approved airline
• 17 ft of 1/2 inch D.O.T. approved airline
• 6 ft of 3/8 inch air line for Intake
• 18 ft of 12 gauge power wire
• 1/2 inch NPT electric solenoid valve
• HornBlasters 200 PSI air gauge
• Brass NPT fittings kit including safety valve and blow-off
• 2 gallon tank
• Viair 325C air compressor
• 12 volts DC
• 19 amps
• Mounitng hardware included
• WIring and plumbing kit included along with detailed instructions
• California Residents: WARNING
+ View More Specs - View Less Specs

HornBlasters Conductor's Special 240 Train Horn Kit - HK-S4-240

• Fitment: Universal Fit
• Black finish Shocker S4 train horns
• 5 to 7 seconds max honk time
• Can be heard from 4 miles away
• HornBlasrers 110/150 PSI pressure switch
• Remote mountable intake filter assembly
• Air filter cartridges
• 10 ft of 5/16 inch D.O.T. approved airline
• 17 ft of 1/2 inch D.O.T. approved airline
• 6 ft of 3/8 inch air line for intake
• 18 ft of 12 gauge power wire
• 1/2 inch NPT electric solenoid valve
• HornBlasters 200 PSI air gauge
• Brass NPT fittings kit including safety valve and blow-off
• 2 gallon tank
• Viair 400C air compressor
• 12 volts DC
• 26 amps
• Mounitng hardware included
• WIring and plumbing kit included along with detailed instructions
• California Residents: WARNING
+ View More Specs - View Less Specs

HornBlasters Conductors Special 244K Train Horn Kit with Spare Tire Delete Kit - HK-S4-244K-STDK

• Fitment: Universal Fit
• All-inclusive Train Air Horn solution!
• High-efficiency & extremely loud
• The horns are constructed fromfiberglass-reinforced ABSfor extreme durability through all harsh conditions
• Stainless steel diaphragms won't rust
• Manifold-less design for flexible installation
• Heavy duty compressor for faster fills
• Max honk time:4 to6 seconds
• Bracket has a black powdercoat finish
• Made from 14 gauge steel
• Quick & easy install
• Max amperage:19 amps
• Maximum duty cycle:100% @ 100 PSI
• Includes: Shocker S4 Train Horns
• Spare tire delete bracket
• 2 Gallon air tank
• Viair 444C Stealth Black Compressor
• 110/150 PSI pressure switch with 40 amp relay
• Remote mountable intake filter assembly
• Air filter cartridges
• 10 ft of 5/16 in D.O.T. approved air line
• 17 ft of 1/2 in D.O.T. approved air line
• 6 ft of 3/8 in Air line (for intake)
• 18 ft of 12 Gauge power wire
• 1/2 in NPT Electric solenoid valve
• HornBlasters 200 PSI air gauge
• Brass NPT fittings kit including safety valve and blow-off
• Wiring & plumbing kit
• All standard mounting hardware & detailed instructions
• It can be heard from almost miles away!
• California Residents: WARNING
+ View More Specs - View Less Specs

Warrior Drop-In Cargo Rack for Toyota FJ Cruiser - 3810

• Fitment: Direct Fit
• Includes basket and mounting system
• Textured black powdercoat
• 300 lbs. highway load capacity
• Constructed from 1 1/4 inch round steel tube
• California Residents: WARNING
+ View More Specs - View Less Specs

Warrior Platform Half Rack - 3830

• Fitment: Direct Fit
• Constructed from 11 gauge steel
• Sits 3 inch lower than factory rack
• Uses factory mounting points and can hold up to 750 lbs.
• Measures 60 inch long, 53 inch wide, and 5 inch high
• California Residents: WARNING
+ View More Specs - View Less Specs

Warrior Quicklatch Axe/Shovel Mount - 4375

• Fitment: Universal Fit
• 05-Current Toyota Tacoma
• Fits factory bed channels
• Sold as a pair
• Easily adjustable to grip all handles between 7/8" diameter to 1-1/2" diameter
• Fully lockable using any padlock or cable lock
• Quick access to your tools
• All Hardware Included
• No drilling or cutting required
• 100% Designed, Manufactured, and Welded in the USA
• California Residents: WARNING
+ View More Specs - View Less Specs

Warrior Economy Bed Rack - 4810

• Fitment: Direct Fit
• 100% Designed, Manufactured, and Welded in the USA!!
• Easy, bolt-on installation using the existing bed rail tracks
• Manufactured using 1-1/4″ round tube and 1″ square cross bars
• Cross bars will accept most Yakima and Thule universal mounts
• Ideal for a roof top tent
• NOTE: The #4810 is not compatible with the Softopper bed system
• NOTE: Designed around the short bed model, but will fit all bed sizes
• California Residents: WARNING
+ View More Specs - View Less Specs

Warrior Platform Bed Rack Reinforcement Kit - 4811

• Fitment: Direct Fit
• 100% US made
• Recommended for additional bed side support on part number 4810 Bed Rack system
• California Residents:WARNING

Warrior Platform Roof Rack - 4860

• Fitment: Direct Fit
• Manufactured using 1-1/4? round tube and 1? square cross bars
• Easy, bolt-on installation using the existing roof track mounting bolts
• Ideal for a roof top tent
• California Residents: WARNING

Warrior Platform Bed Rack - 7810

• Fitment: Direct Fit
• 20-Current Gladiator JT
• 100% U.S. made
• Bolt-on design allows for easy installation and does not require any drilling or permanent vehicle modification
• Perfect for a roof top tent
• Compatible with Warrior Platform Accessories including
• QuickLatch Mounts, MOD Box, Platform Off-Road Mount, No-Drill Spare Tire Mount, Awning Brackets and MAXTRAX & RotopaX Mount Systems
• Constructed with 1-1/4" round tube and 1" square crossbars
• Most universal-style mounts are compatible with the 1" square bars
• Dual-stage powder coat system (black)
• One bed reinforcement tie bar included for bed side support
• An additional Gladiator Bed Reinforcement Bar recommended for added bed side support
• The Platform is 57-1/2" long and 51-1/4" wide
• Warrior Recommends not exceeding the following weights: Stationary: 600 lbs, On-Road: 400 lbs, Off-Road: 150 lbs
• California Residents: WARNING
+ View More Specs - View Less Specs

Warrior Bed Rack Tie Bar - 7811

• Fitment: Direct Fit
• 20-Current Gladiator JT
• 100% U.S. made
• Bed Reinforcement bar recommended for additional bed side support for the Jeep Gladiator Economy Bed Rack system
• California Residents: WARNING

Warrior Full Length Platform Roof Rack with Rain Gutter Mounts - 10908

• Wrangler JL, 4-Door
• May not be compatible with 2021 Rubicon 392 or 4Xe models
• 100% US made
• Installed Rack size: Length 89.5", Width 51.25", Height: 4.25"
• 600lb static load capacity
• 400lb on road capacity
• 200lb off road capacity
• Warrior does not recommend hardcore rock crawling or any other hardcore off road activities with ANY weight on the roof of your vehicle
• Easy installation and does not require drilling or vehicle modifications
• Rain Gutter Mounts attach seamlessly to rain gutters and are easily removable for long or short term installations
• Perfect for a Roof Top Tent
• Includes low profile Air Dam to reduce wind noise on the highway
• Welded one-piece platform for added strength and durability
• Constructed using 11-gauge steel with 1-1/4" round tube and 1" square crossbars
• Most universal style mounts are compatible with the 1" cross bars
• Compatible with Warrior Platform Accessories including QuickLatch Mounts, MOD Box, Platform Off-Road Jack Mount, No-Drill Spare Tire Mount and Awning Brackets
• California Residents: WARNING
+ View More Specs - View Less Specs

Warrior Platform Roof Rack - 10917