Bilstein 9100 Series Coilover Shock Absorber

From $566.99

• Monotube gas pressure construction
• Designed to combine the function of damper and spring
• 2.0 inch or 2.65 inch (OD) Body
• Coil Spring Hardware: 3 inch or 3-5/8 inch (ID)
• Hose Length and Fittings Options: Straight, 90 degree, 45 degree
• Valving can be adjusted internally for rebound and compression
• Completely owner rebuildable
• California Residents: WARNING

Bilstein 9100 Smooth Body Series Shock Absorber

From $406.99

• Monotube gas pressure construction
• 2.0 inch or 2.65 inch (OD) body
• Hose length and fittings options: straight, 90 degree, 45 degree
• Valving can be adjusted internally for rebound and compression
• Completely owner rebuildable
• California Residents: WARNING

Bilstein 9100 Series Shocks

From $1,028.99

• For Smooth Body
• Monotube gas pressure construction
• 2.0" or 2.65"(OD) body
• Hose length and fittings options: straight, 90 degree, 45 degree
• Valving can be adjusted internally for rebound and compression
• Completely owner rebuildable For Coilover:
• Monotube gas pressure construction
• Designed to combine the function of damper and spring
• 2.0" or 2.65 (OD) Body
• Coil Spring Hardware: 3" or 3-5/8" (ID)
• Hose Length and Fittings Options: Straight, 90 degree, 45 degree
• Valving can be adjusted internally for rebound and compression
• Completely owner rebuildable
• Special Notes:BILSTEIN does not manufacture or sell coil springs for off-road use. However, most BILSTEIN off-road retailers sell springs. They can also offer advice on spring rates
• It is not recommended to use a coilover in conjunction with an auxiliary spring source, such as Leaf Springs or Torsion Bars. For Bypass:
• Widest range of tuning combinations within the industry
• Available in 2.0” or 2.65” body
• Completely owner tunable and rebuildable
• Available in piggyback and various hose lengths
• Bypass tubes allow for position sensitive damping adjustability - custom bypass layouts available
• Special Notes:External Bypass dampers require an external spring source such as a coilover, leaf spring, torsion bar, or auxiliary coil. These dampers will not support a vehicle. For Rock Crawler:
• Monotube gas pressure construction
• Nickel plated 2" diameter threaded body
• 2.5" x 12" reservoir with -8 aeroquip match mate hose
• Hard anodized screw top and aurora spherical bearings
• Valved specifically for rock crawling
• Optional coilover setup with dual rate spring
• Available in 12", 14" and 17" travel
• Completely owner rebuildable
• California Residents: WARNING

Bilstein 9100 Rock Crawler Series

From $398.99

• Monotube gas pressure construction
• Nickel plated 2 inch diameter threaded body
• 2.5 inch x 12 inch reservoir with -8 aeroquip match mate hose
• Hard anodized screw top and aurora spherical bearings
• Valved specifically for rock crawling
• Optional coilover setup with dual rate spring
• Available in 12 inch, 14 inch and 17 inch travel
• Completely owner rebuildable
• California Residents: WARNING

Omix-ADA Shocks

From $32.99

• Replacement Shock
• California Residents: WARNING

Crown Automotive Suspension Struts

From $86.99

• Stock Replacement Suspension Strut Assembly
• California Residents: WARNING

Bilstein 9300 Series Shocks

From $880.99

• For coilover:
• Comes with ¾” teflon uniball with machined aluminum eye ring
• Hose length and fittings options: straight, 90 degree, 45 degree
• Completely owner tunable and rebuildable
• Widest range of tuning combinations within the industry
• Included spring hardware for dual-rate 3” ID springs
• Hi-flow independent rebound and compression bypass adjusters For Black Hawk
• One piece 6061 extruded aluminum body with hard anodized finish
• 30% faster heat dissipation
• 10% - 25% lighter than similar welded bypass steel shocks
• Up to 100 degrees cooler peak operating temperature
• 4 ½ inch diameter aluminum reservoir with anti-cavitation valve (ACV)
• Bypass tubes allow for position sensitive damping adjustability
• Completely owner tunable and rebuildable
• California Residents: WARNING

Dana Spicer Performance Adjustable Shocks

From $1,018.99

• Mounting Location: Front
• External Reservoir
• 16 position adjustability
• Hand built by Walker Evans
• Includes billet aluminum remote reservoir brackets
• Sold As: Each
• Made in the U.S.A
• California Residents: WARNING

Fabtech Impact Strut Kits

From $1,212.99

• Impact Strut Kit
• Incl. Impact Tubes
• Brackets
• Black
• California Residents: WARNING

Bilstein 9200 Series Bypass Shock Absorbers

From $1,451.99

FOX 2.0 Performance Series IFP Shocks

From $111.97

• 2.0" Metal impacted 6061-T6 aluminum will resist rust over time
• Clear-anodized for a durable finish
• Internal IFP mono-tube reservoir design separates shock oil from the high-pressure nitrogen
• Black-anodized, CNC-machined 6061-T6 billet aluminum
• 5/8" hard chrome plated heat-treated alloy steel shaft
• Race-developed high-flow piston design
• Application specific valving to maximize performance
• Redundant sealing pack system main seal, wiper seal, scraper seal
• JM92 Advanced Suspension Fluid for improved performance at variable temperatures
• Quiet nitrile rubber allows for increased suspension articulation
• Direct replacement for stock and aftermarket lifts kits
• California Residents: WARNING

FOX 2.0 Performance Series Reservoir Shocks

From $440.99

• 2.0" Metal impacted 6061-T6 aluminum will resist rust over time
• Clear-anodized for a durable finish
• 2.0" Smooth bore 6061-T6 Aluminum is hard anodized
• Black-anodized, CNC-machined 6061-T6 billet aluminum
• 5/8" hard chrome plated heat-treated alloy steel shaft
• Race-developed high-flow piston design
• Application specific valving to maximize performance
• Redundant sealing pack system main seal, wiper seal, scraper seal
• JM92 Advanced Suspension Fluid for improved performance at variable temperatures
• Quiet nitrile rubber allows for increased suspension articulation
• Direct replacement for stock and aftermarket lifts kits
• California Residents: WARNING

Bilstein B8 8100 Series Shock Absorbers

From $1,299.99

4 Wheel Parts 2.5” VSRT Coilover Shocks

From $1,399.99

• Vehicle specific ride tuning provides improved on and off-road performance
• Internal floating piston to improve damping response and eliminate cavitation
• Impact forged aluminum body for increased strength and lower shock temperatures
• 17-4 Ph stainless chrome plated shaft for strength and corrosion resistance
• Closed cell foam bump stop for controlled unloading during impacts on coilovers
• Hand made in the USA
• Limited warranty
• Rebuildable coilover shocks are warranted for 90 days against any manufacturing or material defects

4 Wheel Parts 2.5” VSRT Shocks

From $529.99

• Vehicle specific ride tuning provides improved on and off-road performance
• Internal floating piston to improve damping response and eliminate cavitation
• Impact forged aluminum body for increased strength and lower shock temperatures
• 17-4 Ph stainless chrome plated shaft for strength and corrosion resistance
• Closed cell foam bump stop for controlled unloading during impacts on coilovers
• Hand made in the USA
• Limited warranty
• Rebuildable coilover shocks are warranted for 90 days against any manufacturing or material defects

RT Off-Road Shocks

From $103.99

• Performance Shock Absorber
• Front and Rear Avaliable
• For 3 Inch Lifts
• California Residents: WARNING

ReadyLift Coilovers

From $1,599.95

• ReadyLIFT-Bilstein 8125 Performance Coil-Over Upgrade
• Exclusive design featuring Eibach ERO coil springs and customized shock valving
• Includes ReadyLIFT brackets for mounting reservoir canister

ReadyLift SST3000 Shocks

From $42.15

• Gas / Oil separated - eliminates cavitation
• 5/8" hard chrome plated shaft
• Rebuildable and revalvable
• Two-stage sealing system - Dirt out, oil in
• Nitrogen charged internal chamber
• Designed for use on leveled and mild lifted vehicles
• Developed for use with larger oversized wheels and tires
• Made in USA

Pro Comp 2.5" PRO-VST Series Shocks

From $423.99

• Sold as a pair
• Hard anodized silver finish
• Maximum off-road performance
• 2.5" body outer diameter paired with a full bore piston to maximize damping capability
• 6061-t6 impact forged aluminum body for increased strength and lower shock temperatures
• Hard anodized body finish for increased strength and lower shock temperatures
• Tuned specific to the vehicle application to maximize ride quality and suspension travel
• 17-4 stainless steel chrome plated shaft for strength and corrosion resistance
• 3/4" OD shaft for reduced seal friction and gas force
• Internal floating piston separates nitrogen and oil to improve damping response and eliminate cavitation